How to Replace Front Brakes 2012-2020 Ford Focus
Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1ABF...
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1ABF...
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1ABP...
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1APB...
This video shows you how to install front brake pads and rotors on your 2012-2020 Ford Focus. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.
This process should be similar on the following vehicles:
2012 Ford Focus
2013 Ford Focus
2014 Ford Focus
2015 Ford Focus
2016 Ford Focus
2017 Ford Focus
2018 Ford Focus
Tools you will need:
• Pry Bar 1aau.to/ofp/1AX...
• 18mm Socket 1aau.to/oiq/1AX...
• 19mm Socket 1aau.to/oiq/1AX...
• Brake Caliper Compressor Tool. Single Piston. Lever Style. 1aau.to/or/1AXA...
• Locking Pliers 1aau.to/oaW/1AX...
• Pliers
• 3/8 Inch Air Impact Gun
• Ratchet 1aau.to/ouk/1AX...
• Torque Wrench 1aau.to/omw/1AX...
• Anti-Seize Grease
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags 1aau.to/ocU/1AX...
• 7mm Allen Wrench 1aau.to/oK/1AXA...
• Rubber Mallet 1aau.to/oaf/1AX...
• Wire Brush 1aau.to/obK/1AX...
Subscribe: / @trq
Check out our playlist:
Ford Focus 2012-2020 3rd Generation: • Ford Focus 2012-2020 3...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 44
√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money
This is literally the best video for doing this for this car. Hands down THE best, look no further.
My mechanic wanted a small fortune to do the front brakes. I'm not mechanically inclined, and wouldn't normally tackle this job, but this video made it so easy even I was able to get it done in a couple of hours. And it only cost me about a hundred bucks for the parts. Thank you so much! Fantastic video.
I appreciate the description of the tools used. Too many people just assume we know what we need.
You're certainly a unique combination between a professional technician and a great instructor. Great job!!
Wow dude. The most thorough automotive video I've ever watched. You've earned a new big fan.
Best practice to use new gloves while installing new pads and rotors. Well explained 🎉
Excellent detail, video, pace and tone. You are really good at this.
Just finished my fronts following this video! They started grinding last week so I found this video, ordered the parts and knocked it out. That Allen socket makes a world of difference. I tried with a regular Allen wrench and got it off but man that sucked. Otherwise it was exactly as smooth as the video makes it look.
Excellent Video. I have an up coming brake job on my Niece's Focus. This makes it simple. Complete with tool sizes & torque specs. Much appreciated.
Keep an eye on brake fluid level as you push the piston back to fit the new pad!
Excellent video showing a very professional approach. Lots of great tips. Gave me the confidence to tackle the job.
Very good demo, thank you I'm doing my girlfriends breaks tomorrow. I learned alot on that one, wasn't quite sure where to Greece, now I know. And the 7mm allen bolt needed to know that to. I think I got to go pick up one. Thank you again, James
Great video! very clear with valuable tips! Nice to have the Torque specs!
Excellent video!. One of the best I have seen for brake replacement.
100 foot pounds on the lug nut. I thought your sapose to get a breaker bar with the added cheater extention and stand on it, and do the one subtle jump on the end of the cheeter bar. Lol Very nice job now Im going out to do my own break job. Thank you.
Thank you! Great video, to the point and you explained everything very well. 👌
Thanks Dad!
Excellent video, good pace, nice expression and thorough cleaning and lubrication that I would have missed without watching that. I always remove the cap of the brake fluid before compressing the pistons, is that not necessary, is the reservoir the other side of the servo or something?
Do you have to open the master cylinder before you compress the caliper
Spot on video
7mm for the pins I just did my brakes on my 2012 ford focus
the 7mm Allen screws on the one Im working on are being a nightmare...already broke a 7mm allen socket...it stripped itself out of the soket it was in...not sure why they did this instead of a normal bolt.
Thanks for the great video. This would be the exact same for a 2016 Mk 3.5, right? I assume this video is the Mk3
What brand of torque wrench are you using?
Like a pro 👍
Excellent video
Hola, muy buen video... Consulta, que torque usas para caliper y los de atras?
Do dealerships do the cleaning and lubricating?
What kind of grease are you using
Is anti seize absolutely necessary?
No brake pad hardware?
Presente cordial saludo desde Navoyork Sonora México
278mm or 300mm ? I am kind of confused with the disk diameter...
Would this still work for a mk4 focus?
@TRQ
2 ай бұрын
+@Liam-kd2mx 2012-2020 Ford Focus
The bracket bolts are 18 mm not 19 mm
@greenmarine5
Жыл бұрын
He also showed the socket it was 18mm, pretty obvious...
Do you need to bleed the brakes? I didn't see that part
@TRQ
11 ай бұрын
+Stay Puft The brakes do not need to be bled unless the brake fluid has been exposed to air or has air bubbles in the system.
He says 21ft pounds for caliper bolts and 129ft pounds for the bracket. I found a website stating for a 2016 Ford focus caliper bolts 30ft pounds and 75 for bracket. Just saying if your watching this for a 2016
FYI its indeed NOT a 19mm lug nut. My god I hate American Junk cars! But good video non the less!
Thank you sir! You are a legend
@TRQ
5 ай бұрын
+@FuzzyNipples-ix9px Thanks for watching our video! 1aau.to/m/Shop-TRQ