How to Replace Front Brakes 10-17 Chevy Equinox
Buy Now!
New Brake Rotor Set from 1AAuto.com 1aau.to/ia/1ABFS03799
This video shows you how replace the old brakes on your 10-17 Chevy Equinox with new, quality TRQ parts.
• Check here for more videos on the 2010-17 Chevy Equinox: • Chevy Equinox 2010-201...
This process should be similar on the following vehicles:
2010 Chevrolet Equinox
2011 Chevrolet Equinox
2012 Chevrolet Equinox
2013 Chevrolet Equinox
2014 Chevrolet Equinox
2015 Chevrolet Equinox
2016 Chevrolet Equinox
2017 Chevrolet Equinox
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obs/1AXAA00013
• Pry Bar 1aau.to/oU/1AXAA00020
• 10mm Wrench 1aau.to/oR/1AXAA00010
• 14mm Socket 1aau.to/obe/1AXAA00015
• 18mm Socket 1aau.to/oaf/1AXAA00043
• 7/8 Inch Socket 1aau.to/ob/1AXAA00042
• Complete Torx Bit Set 1aau.to/oB/1AXAA00008
• 1/2 Inch Breaker Bar 1aau.to/oq/1AXAA00078
• Ratchet 1aau.to/obF/1AXAA00016
• Brake Grease
• Brake Parts Cleaner
• Bungee Cord
• Cloth Rags 1aau.to/oC/1AXSS00035
• Drain Pan 1aau.to/oz/1AXAA00320
• Large C-Clamp
• Pick 1aau.to/oF/1AXAA00037
• Sledge Hammer 1aau.to/oQ/1AXAA00091
• Wire Brush 1aau.to/ov/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Chevy Equinox 2010-2017 2nd Gen: • Chevy Equinox 2010-201...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 17
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*
After watching a few videos, this one actually explain the bleeder nut to ease pressure on the piston. And how it could effect the ABS system. Good tib bit!!! Awesome! AWESOME!!! Also, i wasnt setting my hardware even causing it to rub against the rotor! So, i made damn sure they both were on point
Great video. Trick for cleaning rotor. Put on backwards. Clean. Turnaround. Install n clean front side
Great video
Excellent video! Thank you!
What about refilling the master cylinder ?
Thanks my friend
Nice, a few nice tricks... Thank you! but grease... on the torque plate/caliper bracket bolts..? I thought one/I always use a little blue loctite actually... Certainly I torque it down as well.. (I guess at 140 ft/lbs it's ok.....)
How long did you leave the c clamp on the caliber before taking it off ?
No grease to backside of pads?
Always great videos
How break free the rotor from the shoes i
What size was torq bit for rotor?
@patd1961
2 жыл бұрын
T30
You squeeze the caliper before you remove it. Trying afterwards is bizarre. No reason to remove the bracket unless youre putting new rotors on. Waste of time. Dont use a screwdriver to remove the boot its almost a guaranteed tear and future repair.
@mastakush4272
8 күн бұрын
You sound dumb af!
Great video thank you much.