Finally someone doing the complete process replacing this window. Everyone else gets lazy or something and always leaves the existing frame in and replaces the window only. I needed to see the frame replaced too. Thx guys. Great video. 👍🏻

Thanks guys! My rear window tore apart at the seams so the whole window had to be replaced, not just the glass. Your video gave me all the info I needed to do it myself. Simple instructions and fun to watch. Thanks again.

Damn 10 years ago and this is a better video than id make today

thanks this was the only video to remove an ext cab gm rear door panel of this body style saved me a few broken clips and a lot of frustration liked and subscribed for that

Thanks for the video guys!!! really helped save me some money! trying to charge me nearly 400 to fix it!! did it for 150 myself! Thanks again

I have been watching truck repair videos for weeks now, thank you for adding humor.

@UWISHPROD

Жыл бұрын

Glad we could help

Appreciate the video and your sense of humor! I just scored a new (pre-owned) window for $30, versus $238.

@UWISHPROD

5 жыл бұрын

Awesome job!

@souljer0726

4 жыл бұрын

Where did you buy that pre owned window

@nmartin5551

Жыл бұрын

@@souljer0726-sorry for way late response. I got it at a pull a part salvage yard

Great video! It was a lot of help. Saved a lot of cash doing it myself. Thanks guys.

No problem. Thanks for watching!

lol this is exactly what i needed! and pretty entertaining! I need to replace the pop out window on the rear "half door" of a 2000 Dodge Ram 1500... the window is discontinued but I FOUND ONE DAMMIT! and now i have to put it on, and havent the first clue on how to do that... but this is helpful!!

the 3 screws to remove the old window frame is an odd shapes screw, whats it called and what size is it ? ty

dude! thanks for this the hinges for mine were broke and nobody told me so when i opened mine it just fell thanks for the help!

I wish I had seen this a week ago, I would have saved over a hundred dollars!!!

In the process of restoring a 2000 I want to replace the weather seal around the window is there a way to do it?

Good job fellas although I'm running a 97 similar model this helps. Where and what is that glue? Can't find it online.

My 3rd door pop out window has an air leak. Do you know how to stop the leak? Can I just replace the window seal? If so, where can I buy it?

Where did u get just the hardware, bolts, bracket

Needed a video for a pop out window but this was hilarious 🤣

Well done guys liked your vid but have one question. Did any kind of prep solution come with the window tape or did you just clean it? If you just cleaned it I don't think just any kind of soap will work it may leave a film. Maybe window cleaner is all you need.

Hi, where did you get window and glue?

Nice job, I think I missed how you two reattached the widow bracket to the window so you can open and lock the darn window. Or is that footage tucked in somewhere? ????

Thanks for making this video it helped me

Getting ready to order window and tackle this!

How did you put the frame on?

Sorry but where do you get a window like that got same truck and window needs to be replaced I've been searching online for a back window like that

Hey just wondering were did you get the glue because I look on eBay and didn't find anything that look like the glue you used

@SealofPerfection

5 жыл бұрын

It's the wrong stuff anyway. You want windshield urethane. They used a butyl product like 3M Ribbon Seal....and they shouldn't have.

You guys are funny! And helpful!

How's it holding up? Any leaking yet?

My 99 Silverado did not have the three screws, so when installing I used duct tape to secure the window until the putty dried

@SealofPerfection

5 жыл бұрын

Problem is, that "putty" is NEVER going to dry.

That last line was bull....you almost got me

What about the window in the door that don’t open?

Whats the name of that glue and where can i find it . thanks . Good video

@MrSpaceRatt

6 жыл бұрын

I am a glass company owner. The name of the glue the fellows used is "butyl tape" ; however, this stuff should never be used on an installation like this. The proper sealant would be automotive urethane, which costs about $25 a tube at the auto parts store. However, most glass shops will sell it to you for $5 to $10 (it costs us about $3.50 a tube). DON'T USE BUTYL.. It won't hold up on this type of installation.

good job u 2 !

Mine got popped out? Idk how to replace it now apparently they don’t make the parts anymore…

Where can you buy the whole window and frame from ? I have a broken one know I'm trying to fix.

@UWISHPROD

3 жыл бұрын

Possibly Rock Auto. Not sure where else, other than a junk yard

@davisjenniferbrown6438

3 жыл бұрын

@@UWISHPROD what it actually called ?

@alexisalvarez5625

3 жыл бұрын

Where’d you buy the windshield glue

How about doing the hard side? Not so easy.

What is the part number for the window

@MrSpaceRatt

6 жыл бұрын

DQ8939YPY is the part number

You don't even have to do all that...just replace the glass, that's it! no glue no scrapping...2001-07 chevy are designed that way, mines just popped out and new glass went right in, no glue.

@RayBenson45

6 жыл бұрын

Rezkid 43 make a video of how u done it your way it will help a lot of people

@Htown_sports_dude

5 жыл бұрын

Tbh I think it's good that they just pop out cause if u have a kid and he just starts messing with the window he won't leave

@christopheryawn

5 жыл бұрын

I call b*******. I want to see you pop your window in and out without doing what they had to do. I'm looking at videos right now because I have to change my name out because it's busted and being that is busted how the hell am I supposed to pop it right out of there it's half way out as it is. So please show me your video of how easy it is that way I can avoid doing it like the other guys are doing it which I believe that's the way I'm going to be doing it because that's the way you have to do it

@scottmcmillan5085

5 жыл бұрын

Dude is "right" from a technical stand point. The window is held in place by two rubber (key word coming) "press fit" hinges. They may "pop in", but they sure as hell do not "pop" right out. Neighborhood hoodlums broke my window out to steal my buddy heater. Spent three hours vacuuming the shattered glass yesterday. The window is glued to a rubber seal that has the hinges. From personal experience, it does not "pop" right out. But with more knowledge/insight or ingenuity it may "pop" right out, but that wasn't my experience.

@jakeman24187

5 жыл бұрын

Thanks for that. I just popped mine in from the old one and it went in fairly easy

Thx for the tutorial, it will surely save time. And, the blonde dude isn't bad on the eyes either 👀😏😉

It's nice to see brave boys like this making videos together before the LGBT movement

Where can I get a replacement Window... Any help

@morganstrother929

4 жыл бұрын

cowboyzfan18433 I got one from a local salvage yard

thanls

AT 1:07 he say's to take a dodge window cover off just lift, i thought this was a z71 chevy? let me see oh yea it does say z71 on truck rear panel............

I just ordered one from Rockauto.com. It was about a hundred bucks cheaper than anyone else.

Where did you find the glue ???

@naomisimpson9620

8 жыл бұрын

+ProGamer 885 its 3M window weld on eBay ..under $20 for 15 feet

@JohnO-vs7of

7 жыл бұрын

I found the same stuff at Wal*Mart for $15, but it had a different width... does the width matter?

@aeio_

7 жыл бұрын

Ask a woman -- width _always_ matters. (Or is it size? I always get those two confused. ;-) ) I'd try to match the original if I could -- too small and there might not be enough adhesive to hold the window in place / wind noise leakage. Too wide and the tape will be exposed to the elements -- would work, but might not look as good as the original. I see tapes sizes are 1/4 and 3/8, or 0.25 vs 0.375, or a difference of 1/8. (0.125) At that size width DOESN'T matter. I think my older model truck has no screws, just a friction fit for the plastic frame. Guess I'll find out shortly.

@JohnO-vs7of

7 жыл бұрын

It's OK I figured it out months ago now. At least some one responded finally after 3 months of the issue being resolved.

@myfriends1382

6 жыл бұрын

John O 1rdesLiisosoisiiiskisiiiSISKSKSKKSKKKKSKDKKISIEIIEII9SL EO LO Dalkzl9iiriir83priodloroir. 88èeed

Exenlent boy's

Hey guys! Although I am proud of you for attempting to install this yourself, you should NOT have installed it with butyl tape. It came from the factory glued in with urethane for a reason. The butyl is going to trap dust, and the dust will trap moisture, which promotes rust. Also, because this is a frame that will get a lot of vibration, the butyl is going to fail within a few months. Urethane will cure and bond the frame with over 600psi of tensile strength, whereas the gooey butyl tape will never cure, and will have only about 20psi of tensile strength. You guys have a great future, but please, check with me first! I've installed many thousands of glasses over the past 35 years. I am happy to advise you on the best techniques.

@SealofPerfection

5 жыл бұрын

YES! They used the completely wrong product and it will not hold in there permanently with that stuff. You only use butyl for a window that's bolted in.

@eastside0434

4 жыл бұрын

Where do you get the urethane 600 psi.?

@michaelkimball8686

Жыл бұрын

​@Pacfanweb huh kinda like they did with those screws and metal tabs. Mine has been done the exact same way for years.

That's a side window not a rear window.

Hi,!

Just used the urethane window sealant that some of the commenters have mentioned and it didn't work. It leaks worse than before. Use at your own risk. *Edit, apparently this urethane requires a primer"3M single step primer 08681 or 08682)" not mentioned on the tube nor on the Amazon listing nor reviews. The tube costs about $16 and the primer costs $42.

@SealofPerfection

4 ай бұрын

You might want to review how you installed yours. You are going through telling everyone that it is bad advice to use urethane, but it is actually the correct advice. You evidently just did not do yours correctly. You have to apply a primer to the window and to the body before you put the urethane on it. I suspect you probably missed that step

@fern9234

4 ай бұрын

@@SealofPerfection To be honest, the tube comes with only warnings about the dangers of using the product and no directions at all. Nothing on the Amazon listing either. Now that you mention it, I searched the 3M site for this product and it does say it calls for primer 08681 or 08682 to be used. It's kind of frustrating that it never mentions it because apparently I'm not the only one. I just searched the Amazon reviews for the word "primer" and it seems that out of 1200+ reviews and questions only 2 people used a primer with it. I'm still skeptical that this will work given that both my surfaces were extremely clean and prepped with alcohol and it's bonding plastic to painted metal. Thank you for any advice you can offer, you obviously know what you're talking about.

@SealofPerfection

4 ай бұрын

@@fern9234 they should list it as for professional use. If you have the correct type it will absolutely work because that is what the window was installed from the factory with in the first place. Remember them having to try to chisel that old sealer off and telling us that they couldn't get it all off ? That was urethane. The way it was done in this video, is with butyl. That was only used with glasses that bolt in, where the screws or bolts are what actually holds the glass in the car. The butyl is not a glue as, stated in the video. It is a sealer. That said, it is pretty tacky and it might hold one in there for awhile. But that's not the way it's supposed to be used.

@fern9234

4 ай бұрын

@@SealofPerfection I understand. The stuff I bought was 3M 08693 auto glass urethane window adhesive. Can you confirm if that is what is required. Also, how important is to remove the old urethane since it's is extremely bonded to the painted metal? Also am I to prime both the plastic frame and the metal (or old urethane if it's ok to leave it)? Thank you for your help. I edited my original comment btw.

@SealofPerfection

4 ай бұрын

@@fern9234 I believe according to the TDS you are supposed to leave 1 to 2 mm of the old urethane if you can. And yes I would put the primer on the plastic piece, after thoroughly cleaning it with waxing grease remover or some type of solvent that did not melt it

That’s butyl tape. It has it applications but this isn’t it. The original install is urethane automotive adhesive and should be installed with the same. You are giving wrong instructions and are causing others to do the same. You run the risk of the glass coming out when not using the correct adhesive for the job.

It's called butyl

Do you warranty your work? Haha

@vickieshannon5160

8 жыл бұрын

+Josh Miller funny

@Mcbeth2pl

8 жыл бұрын

+Josh Miller He's working on a Chevrolet and at 1.08 mins into video ...He said "When taking off a dodge door cover off ?"........Did he forget what type of truck he is working on?

@383man

8 жыл бұрын

+Mcbeth2pl didn't catch that he was noting how on a dodge it's easier to pull it off since it lifts right off when the bolts are removed.... maybe try watching the whole video lol.

Good video, even though you should have used urethane. And you should basically stop saying basically. Lol

@gertraba4484

5 жыл бұрын

basically YES

@fern9234

4 ай бұрын

Well, this comment and another one I saw in this section led me to buy the urethane you speak of and it didn't work. It also leaks both windows. I know you meant well but it's bad advice

That is NOT what you put that glass in with. You used butyl. It's supposed to be urethane.

@fern9234

4 ай бұрын

It is this comment that made me get the urethane you speak of. And it didn't work. It still leaks. I know you meant well but it's bad advice.

@SealofPerfection

4 ай бұрын

​​​@@fern9234it's not bad advice, it's the correct product. It's what the factory used. No offense to you, but it's really not a job for amateurs. I suspect you just didn't do it right. Or you have a different problem than the glass leaking. Did you put primer on the body and on the windshield before you installed it

Cringe worthy

easiest way is to go buy a Ford F150...

@ChevyGbody1987

7 жыл бұрын

Onry1 so that everything can be wrong with it and you don't have time to worry about the windows

@ChadtheDad23

6 жыл бұрын

gold xD

@Glyroth

5 жыл бұрын

Buy the ford f150 crash it then junk it cuz who the hell wants the reliability of a Ford

@SealofPerfection

5 жыл бұрын

Yeah, but then they'd have a Ford.

You don't even have to do all that...just replace the glass, that's it! no glue no scrapping...2001-07 chevy are designed that way, mines just popped out and new glass went right in, no glue.

@jasonpasco43

7 жыл бұрын

Rezkid 43 so i can replace just the glass

@ChadtheDad23

6 жыл бұрын

only if the seal is bad or the clips that hold the window is broken, cause the window will fall eventually

@MrSpaceRatt

6 жыл бұрын

If the plastic hinges are broken, or the plastic snap-lock is broken, the frame will need to be replaced.

@636Steph314

6 жыл бұрын

They told me my snap lock was all one piece and had to do this i'm not happy with the safelite replacement it isn't up to par with my original that's for sure and I can see into the "seal" smh. Wish I did on my own and went to pull yard for actual GM glass