How to Replace Exhaust Manifold 1997-2003 Ford F-150
Автокөліктер мен көлік құралдары
Buy Now!
New Exhaust Manifold from 1AAuto.com 1aau.to/ib/1AEEM00320
This video shows you how to install an exhaust manifold on your 1997-2003 Ford F-150. The exhaust manifold collects the combustion gasses from your vehicle's engine, and directs them to the rest of the exhaust system. Frequent heating and cooling can lead to cracks or leaks. Installing a new exhaust manifold is often the only solution.
This process should be similar on the following vehicles:
1997 Ford F-150
1998 Ford F-150
1999 Ford F-150
2000 Ford F-150
2001 Ford F-150
2002 Ford F-150
2003 Ford F-150
Tools you will need:
• 13mm Socket 1aau.to/oa2y/1AXAA00015
• 15mm Socket 1aau.to/oa2y/1AXAA00015
• 8mm Socket 1aau.to/oaKs/1AXAA00017
• 3/8 Inch Air Impact Gun
• Ratchet 1aau.to/obek/1AXAA00016
• Socket Extensions 1aau.to/oa2y/1AXAA00015
• Swivel
• Torque Wrench 1aau.to/oakk/1AXAA00044
• Gloves 1aau.to/oxQ/1AXSS00048
• Safety Glasses 1aau.to/or9/1AXAA00343
• Hammer 1aau.to/oKR/1AXAA00091
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 21
√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money
@donaldkelly7928
Жыл бұрын
I have found that using the Ford gaskets they tend to not blow out unlike the non steel gaskets.
Never seen one go half that easy
Thank you so much! You're a Gentleman & a scholar don't let anyone else tell you otherwise!
Thank you for making all these videos and the playlist you guys are awesome!
Nice video...I respect your work!
Visually inspect the new manifold for casting flash blocking or partially blocking the inside of the manidold. It can cause severe problems and headaches.
That 2 nd bottom one is a pain in the ass ford has a engine bracket that blocks the nut on the 03 4.6 u have to loosen the 3 bolts to the plate and wedge prybar under manifold and put a bolt in 2nd top bolt then it will come out 13 hrs later 🖕🏻ford
Hopefully they come out! Wrench peeks up
So what if you don't have a welder? can the bold be drilled and backed out with a kit out there someplace?
Did you take the fenders off?
Awesome thanks
Don´t need any Loctite for the exhaust manifold?
What size is the nuts on the manifold
My bolts are in there so tight I can't get them out . What do I do now?I have sprayed them for two days
Can a guy use a stick welder to weld a nut on a broken stud?
Better paint those sockets black so they're impact rated
Why do I see non-impact sockets bieng used with an impact wrench?
Definitely not an Ohio truck for sure
0% chance it’s this easy
I can’t get a torque wrench in there so I’m using an impact where I can’t feel the torque at all, instead of the hand tools I have next to me……👍