If this video helped you out and saved you a service fee, please feel free to donate to the channel! www.paypal.me/garagedoorgenius

@jasoncharbonneau9588

2 жыл бұрын

Thanks I'll have to get some of those Rods to tension it.

@garagedoorgenius

2 жыл бұрын

@@jasoncharbonneau9588 research how to do it. Watch a few different videos. Torsion spring tension is nothing to play with. If your somewhat mechanicly inclined you'll have no issues. 🙏👊🏼

@jasoncharbonneau9588

2 жыл бұрын

@@garagedoorgenius Thanks. I should be ok. I guess I just need to determine how many 1/4 turns I need to make once I get to that point.

@garagedoorgenius

2 жыл бұрын

@@jasoncharbonneau9588 7' will get around 30-31. Now if there is somewhat tension on it you can start out small. Put about 10 quarters on it. Been tested out.

@davidhatfield4648

5 ай бұрын

Just sent a donation for the channel. Thanks!

Perfect! One side broke at the bottom loop and so I figured I'd go to Lowes and grab a replacement. As you mentioned, they only sell the longer extension spring cables, but I thought I could cut it and crimp a barrel on it. Wrong! Regular pliers do not work for this. Scavenged a cable from the door we don't use and tried for an hour to get it on. Seemed impossible with the cable tension so I called for service, but they were closed for the day. Watched this video, ordered the right parts and a pair of vise grips on Amazon and they arrived the next day. In 30 minutes, I replaced the broke cable and did the other side too since that cable was frayed. Not a lot of room to work on the ladder, but I got it done and saved a large service fee. Thanks again!

@garagedoorgenius

5 ай бұрын

What a freaking awesome comment! Good job my guy getting the job done and saving money too! 👊🏼

A shockingly fast, flawless fix. Thank you, very much. If there is a Menards store in your state, you might find the cables sets for the 8’ and 7’ foot doors in the aisle- I did tonight. My store had them mixed on the hook, so make sure you grab the right set. They have a cheap 3 pack of vise grips too, if yours have gone missing.

Video still saving asses in 2023. The cable looked loose at first when we hooked it on but once you do the other side it’s good. Thanks

@garagedoorgenius

10 ай бұрын

Heck yeah! Thank you for the awesome feedback. 💯😎👊🏼

Very helpful. Have been residentially installing garage doors for over 1.75 years and have yet to try a trick like that. Cool channel.

@garagedoorgenius

Жыл бұрын

Thank you for the awesome comment! 🤘🏼

Thank you so much... we lost one line with a shovel issue and then the next day it was another rake on the other side.. so got the lines like you had and replaced both and now I save some $$$ Thank you again for the video

@garagedoorgenius

2 жыл бұрын

🙏

Not only did I benefit from this video, but I watched your other video on adjusting the torsion springs as well as re spooling the drum. You must’ve saved me about $500-$600. I’ll definitely sub and donate to your channel. Thx so much!

@garagedoorgenius

10 ай бұрын

Thank you so much for the donation! I really appreciate it. 🙏🏼 Glad to help my guy. Especially in this current time. Saving money is the name of the game.

Thank you for the video, Garage Door Genius! One of my cables broke (corrosion at bottom) and I was able to replace both cables (one at a time) and saved an expensive service call!!! The video is well done, I followed the video and the replacement went silky smooth! Thanks again!!!

@garagedoorgenius

5 ай бұрын

That's awesome! Thanks for the feedback. 👍🏼

You the man. Saved me a headache. Had a cable pop out thought i was fucked.... boy did you prove me wrong. Thanks for the video it helped me get my door fixed. Cheers mate

@garagedoorgenius

2 жыл бұрын

Thanks for the positive feedback! 🙏

Thank you for the awesome video that was very helpful for me with replacing the cables on my garage door. Note that I did receive poor cables from the first company I used on Amazon. The second set worked perfectly

My cable broke last night. Got a new set today, watched this video and installed them! Thank you for making this video!!

@garagedoorgenius

3 жыл бұрын

Glad the video helped! 💯👍🏼

@MrJohnthefarmer

2 жыл бұрын

Mine broke this morning off to go get some cables. I figure if one broke, the other isn't that far off.

Been having trouble after a not-so-Handy man screwed something up when installing an opener. Good video, it has given me some ideas/insight that will (hopefully) help with my repairs.

@garagedoorgenius

2 жыл бұрын

🙏

Thanks for the video. One of our cables came loose when the door hit our open hatchback. The cable was in good shape, so I used your advice to reinstall the cable. Thanks again!

@garagedoorgenius

7 ай бұрын

Glad you got it fixed up!

Thank you thank you thank you! Seems someone pushed the door up manually and caused both cables on the pulleys to cross thread. Your video saved me a bunch of money! Thank you again!!!

@garagedoorgenius

2 жыл бұрын

You're welcome 🙏

Llevaba 5 horas intentando arreglar mi portón sin éxito, ví su video y en 10 minutos quedó arreglado, thank you very much for your video saludos desde México!

@garagedoorgenius

Жыл бұрын

🙏

i dont ever comment on videos but this legit saved me $$$. I got quotes for this work between $100-$240, but legit followed this video and replaced it in 5 mins by simply following advice and buying cables from Amazon. Lowes, and home depot do not carry these! I would add a bit more advice however, make sure the cable lengths are the same as the one you are taking off. There are different lengths, but i found mine was 8’6 and i measured the new cable and old cable to make sure they are the same length before attempting to do the install. Great job and thanks for posting this video!!!

@garagedoorgenius

2 жыл бұрын

Glad to save you some money bro. That's the name of the game! Good pro tip also 👍🏼💯🔥.

Wow. What a game changer. I used to unload and reload the torsion springs to do this job. Took me a fraction of the time and was also much safer to do it this way. Thanks!

@garagedoorgenius

Жыл бұрын

Can't believe I missed this comment. It's been almost a year. Thank you for the comment! Hope this method helps.

@therealdirtydan2940

2 ай бұрын

All the remaining tension on the springs go to the opposite cable your working on if you do both at the same time your springs will dump

Great video! Went to the comments section. Didn't even watch other videos anymore after checking out the positive feedbacks. After 2 hours I replaced both cables. Took longer than anticipated because my door is old school from the early 90's. There's no knob fixture at the bottom of the door to hook the cable to. Instead there's a rod with a pin so the only way to remove the cable is to pull down the whole bracket/roller assembly about 2 inches so that I can slide the rod out to free up the cable. Safer design but not repair friendly. Thanks for this great video i saved a couple hundreds. 🤙🏽

@garagedoorgenius

Жыл бұрын

Awesome brother! Glad to help. #SaveMoney

watched this video and fixed my garage door cables. It was so simple. THANK YOU

@garagedoorgenius

2 ай бұрын

I love comments like this. Heck yeah brother! 👊🏼

Worked perfectly and easily and quickly explained. Thank you! Perfect example of how to do that without all the BS and attitude of other videos. Subscribed.

@garagedoorgenius

28 күн бұрын

I really appreciate the SUB. Thank you! 👍🏼

Worked like a charm! The hard part was I had to lower the door while I waited for the cables to be delivered so raising the door was really hard--I ended up using a car jack to get it started.

@garagedoorgenius

2 жыл бұрын

Awesome! Great job Thomas. 🙏👍🏼

Man this was eye opening. Thank you for letting his video. I had one cable pop, so my door is stuck crooked, but this helped a ton for helping me with options to get it fixed up.

@garagedoorgenius

Жыл бұрын

I really appreciate the awesome feedback! 💪🏻👍🏼

Thanks to you, I fixed the problem in 15 minutes. Great video. Thanks a lot.

@garagedoorgenius

2 жыл бұрын

Glad to help!🙏

Thanks man, you saved me $200 bucks which is what a contractor wanted to change it!

@garagedoorgenius

Жыл бұрын

I appreciate the comment! 👍🏼

THANKS! Saved us nearly $300!

Thanks for video, quoted $350 at the house. My wife fixed it 20 minutes and cost was $13. Thanks soon much Terry in Ontario. $

@garagedoorgenius

2 жыл бұрын

Glad to help, Terry 🙏! Tell your wife excellent job. You folks take care. 👍🏼

I have to say Thank you! This saved my time, my money and my life potentially!

Thanks for the video. One note - If your rollers are going bad, or you just want to replace them, now is the time to replace the roller where the cable attaches as well. There will be no tension on it with the door up and cable off. I did all of my rollers, changing over to smooth, nylon, rollers, and the cables at the same time.

@garagedoorgenius

2 жыл бұрын

Awesome pro tip!

awesome video! did EXACTLY as you said (including amazon for the 7' cables bc no hardware stores carry them) and completed the job in about 7 mins for both cables! too ease!!

@garagedoorgenius

Жыл бұрын

That's awesome broh! 👊🏼 Thanks for the comment. 💯

Thanks for this video! I manged the door at work trying to leave for the day, got in a panic because I couldn't close the door! I used forklift to slowly lower the door after removing both cables. I'll be watching this video again tomorrow when I replace the cables!🤦🏼‍♂️😁

@garagedoorgenius

Жыл бұрын

Glad to help bud! Check out this video also. It may help to understand how the cables and spring work. kzread.info/dash/bejne/p4StrcFxZbfMn7Q.html

Easy 5 minute fix. Thank you for a clear video tutorial!

@garagedoorgenius

2 жыл бұрын

You're welcome 🙏.

been repairing garage doors for about 6 months now and any time ive had to replace cables i always take the tension off the springs. this is a game changer for me. thank you.

@garagedoorgenius

2 жыл бұрын

You're welcome buddy! 🙏

@claudebieniek7272

2 жыл бұрын

Who told you to take the tension off. Just back wind the springs. Been doing it for 21yrs

Dude, You just save me about $250 bucks! I was changing out the metal rollers to a nylon rollers when the spring cables became untangle. After watching your video, I was able to fix the spring cable myself without calling a professional. Good job!

@garagedoorgenius

3 жыл бұрын

Awesome comment! Glad to help.

@dashiellhouse

2 жыл бұрын

Righteous I'm exactly in the same situation. Awesome

@garagedoorgenius

2 жыл бұрын

You got this broh! 🙏✌🏼

Hey bro you have helped me a lot my son and I were able to fix our garage door through your video.Good advice .Thanks again,Rodney here in South Africa Durban

@garagedoorgenius

Жыл бұрын

Rodney I'm so glad the video helped you out brother! 🙏

Genius fix. I didn’t have to mess with the springs and no service call!

@garagedoorgenius

11 ай бұрын

I really appreciate the awesome feedback! Thank you sir. 🙏🏼

After (a lot) more perseverance I was able to pry off the old cables. I did this after verifying the loops on the new cables would fit over the knob on the bottom bracket. I think what happens is the loop elongates over time and mine just fit much tighter which is probably a good thing. I think the only additional tip I'd make is to put a bend in the cable where it comes out of the wheel and wraps around, so it conforms better without a little hump there. Otherwise, I think this was best video. Trying to change the cables with the door down causes the bottom brackets to be jammmed near the floor with little access to get the cables off the hub (in my case). Thanks for the video.

@garagedoorgenius

3 жыл бұрын

That's great news you got it off! And also, great tip. People will read this and gain something from it. Also, you don't want to try and take cables off when the door is down. That's when the tension is applied and very dangerous. Do it with the door open. Tension is reduced GREATLY. Allowing you to do the cable change without fighting spring tension. Thanks for watching my video Dan! 👍🏼

@fabiocunha264

Жыл бұрын

@@garagedoorgenius If the cables have snapped and are already out, would it make sense to install the new cables with the door down? My door is super heavy to lift as it is now. This just happened to me this morning.

Only spent 40 dollars to fix it. Thank you for your video

@garagedoorgenius

29 күн бұрын

Glad to help! Thanks for the comment.

Great videos, thanks to you I was able to replace the belt and cables with confidence👍

@garagedoorgenius

Жыл бұрын

You're welcome!👍🏼

Dude, I followed your steps to the Tee and got it done in like 10 minutes. You saved me at least $200!! Can't thank you enough! What happened to my door: came down on a hard object on one side and the cable came undone (strangely, the door didn't back up upon hitting something). My cable was intact so I reused it. :D

@garagedoorgenius

2 жыл бұрын

Heck yeah bro!! Saving money is the name of the game. 🔥🙏🔥

@rich19727

3 ай бұрын

This dude is the goat 🐐.

Great video brother. You have explained it in such a way that you've inspired me to give it a go. Plus showing the before and after really helpled. God bless you.

@garagedoorgenius

Жыл бұрын

Thanks Dwight! You got this buddy. 👍🏼👊🏼

@dwightwhite7838

Жыл бұрын

@@garagedoorgenius Thanks brother.

This was easy. It took me 10 minutes and all done...Than You!!!!

@garagedoorgenius

2 жыл бұрын

Glad to help! 🙏

Thanks for your video. I was able to replace the cables with no problem! Happy Holidays!

@garagedoorgenius

Жыл бұрын

I really appreciate the positive feedback Dr. Cain. I'm really happy my video helped you out changing the cables on the garage door. Happy holidays to you and yours!

@garagedoorgenius

Жыл бұрын

Thank you for the donation towards the channel! 🙏

Thanks so much for the video, I have to install a new bottom seal on a Overhead Garage door brand. I have to remove the bracket the cable loop is on so I'm going to follow your video instructions. I always thought removing the cable that it would be under the spring tension but I guess it isn't by watching your video. Thanks again

@garagedoorgenius

Жыл бұрын

You're welcome and thank you for watching the video! I also appreciate the donation. That is super nice of you. 🙏 As long as you keep one cable on, you'll be fine. Replacing one at a time. Don't take both off at the same time because you will lose all the spring tension. When the door is open there is still tension on the spring. Just not the full amount like if the door was closed. You got this Gregory! 👍🏼👊🏼🤘🏻

Wow! Watched the video, ordered cables from Amazon did everything as instructed in video. What an easy fix. Thanks for a great video!!

@garagedoorgenius

Жыл бұрын

Glad to help! Thanks for coming back to leave a comment. 👍🏼🔥

@welbyroberto6581

Жыл бұрын

@@garagedoorgenius well, I decided to spend $120 US and called the garage door guy as my hands are a bit weak and I need a 2nd man to lift up the heavy door

@garagedoorgenius

Жыл бұрын

@@welbyroberto6581 probably a good call. ER visit cost more than that. Don't wanna get hurt. 🙏

@welbyroberto6581

Жыл бұрын

@@garagedoorgenius give me few years younger, I would follow your video guide and DIY, good job nevertheless.

@garagedoorgenius

Жыл бұрын

@@welbyroberto6581 thank you for the positive feedback!

Perfect tutorial i got mine done in about 15 minutes!!

@garagedoorgenius

6 ай бұрын

Awesome! Thanks for the comment. 👍🏼

Great idea. Instead of winding the cable around the drum a bunch of times you could loosen the drum and spin the drum winding the cable until it’s snug

@danle2884

4 күн бұрын

It would be tough to loosen the nuts of the drum to turn the drum, when the door is up, due to lack of space.

Wow, you make it look so simple. I am going to try it. Thanks 🙏

@garagedoorgenius

2 жыл бұрын

You got this! 🙏

my hubby and i did it in just a few minutes … thx for the info

@garagedoorgenius

2 жыл бұрын

Nice job you two!! No problem and glad to help.

Great video, Clear, safe and to the point! Thank you very much.

@garagedoorgenius

Жыл бұрын

Thank you for the comment! I appreciate the feedback. 👍🏼

Thank you for the very clear and detailed video! Our garage door has one side’s cable fell off track. The cable end fell out of the notch and the whole cable unwrapped from the track. We were able to take it off and re-wire after watching your video. Now the garage door is working again! XD thank you!!

@garagedoorgenius

2 жыл бұрын

You're welcome!

Worked perfectly. Me and my garage door thanks you!!!

Thanks for the information. I've got to do the same thing and knew I could find it on KZread. Sometimes what you need to know isn't well presented. I was lucky I came here first.

@garagedoorgenius

Жыл бұрын

Thanks for the comment, David. I really appreciate it! 👊🏼

Very clear instructions and camera very useful and focused, thanks.

@garagedoorgenius

3 жыл бұрын

You're welcome! 👍🏼

Wow, this is so much easier than I thought it was going to be.

@garagedoorgenius

Ай бұрын

It's not too terrible. Good job my guy! 👊🏼💯

Thanks you did make it look easy. You saved me some money. Jim from Crosby Texas.

@garagedoorgenius

Жыл бұрын

Glad to help, Jim! 🙏

Great video, thanks a lot it'll save a lot of us a lot of money, I have the garage door guys out they want $500 to replace the springs and $100 more for the cables

@garagedoorgenius

2 жыл бұрын

I'm all about helping folks save money. Especially in today's climate. 🙏

@deandennis395

Жыл бұрын

Same here. $550 for the springd, and another $125 for the cables. Then we noticed cracked hinges. Aaaand he wanted to replace those at $25ea. I got him down to $350 for the springs and let him do it since it wouldn't open and we needed it. Then I bought heavy duty cables, hinges, and rollers for $110 on Amazon. Came out way ahead.

@garagedoorgenius

Жыл бұрын

🙏 Saving money is the name of the game!

This video totally solved my problem. Thanks!

Thanks a lot. I think I can do by myself too and I just ordered the cables!

@garagedoorgenius

Жыл бұрын

You got this my friend! 🙏

Amazing !!!! Loved the way you explaining so good with so details thanks so much

@garagedoorgenius

2 жыл бұрын

🙏

Thank you, now I have enough understanding, and i am going to fix my cables.

@garagedoorgenius

Жыл бұрын

Glad to help! 🙏

Thanks you just answered a question from a previous video! Where to find cables...

I have spent all morning watching videos on how to replace these (since both of mine snapped last night) and this was the easiest and quickest way I have been shown to replace them. Going to try it out here in a few hours!!!

@garagedoorgenius

2 жыл бұрын

Let me know how it goes! You got this. 👊🏼

@milesej05

2 жыл бұрын

@@garagedoorgenius Well, didn't work out as easy as I had hoped. Since both cables snapped it was a little more tedious job. Had to install both cables, then wind each individual torsion spring then readjust the cables on the drums. Finally got it done but there is a slight gap on the left side. I gave up. haha

@garagedoorgenius

2 жыл бұрын

@@milesej05 well you did more than what most people can. Hats off to you sir. Your mechanically inclined enough to figure out what needs to happen to get the job done. Although you got a gap you definitely did a good job in my book. Especially if you're not a garage door guy and just a DIYer.

@milesej05

2 жыл бұрын

@@garagedoorgenius I'm pretty mechanically inclined, but when there is a large amount of potential energy stored in a device (torsion spring), I tend to wean away from the repair. I'll do every type of repair in a house expect gas piping. haha. Thanks again!!!

@garagedoorgenius

2 жыл бұрын

@@milesej05 🔥👍🏼💯

Easy money! And doing that all one handed and the hand with the camera takes mad skills! 😂 Amazing work Bro! Keep 'em coming.

@garagedoorgenius

3 жыл бұрын

I appreciate the kind words Santiago! This is a video I've been meaning to do for a while. Finally got it ✅ off the list.

Great. Thank you for a very easy to follow and clean video.

@garagedoorgenius

2 жыл бұрын

Thanks James!

Very nice, easy to follow DIY. Thanks!!!

@garagedoorgenius

2 жыл бұрын

🙏 glad to help!

Thanks for the video. Had the right idea, but wanted to see someone else do it first to make sure. At 4 min 30 sec mark you came THIS close to becoming spider-man ;)

Thx. Straight and simple.

Thanks for this video. I am gong to save this for future reference, because my door is old.

@garagedoorgenius

3 жыл бұрын

Hey, thanks for the continuing support of my channel and vids. The method in the video is super safe. No dealing with tension springs. I always try to lookout for the novices out there saftey. Also, even if you would bar the springs to change cables, it can be a pain in the arse to get the hoop off the bottom fixture. Much easier with the door open. 💯👊🏻

Thanks Brother, You made this look easy and I hope to do it tomorrow.

@garagedoorgenius

4 ай бұрын

You got this my guy 👊🏼.

Thanks! Somehow the loop on one of my cables had gotten frayed and was hanging by one strand. Only found it by accident while lubing the door for noise. Interestingly, when the replacements arrived and I got the damaged one off, it was 4 inches shorter than the new one. My guess was that since it was on a spring, it would've taken up the slack. I was wrong. The effect was that the opposite side of the door didn't close by about 4 inches. Since there was nothing wrong with the other cable, I wasn't going to replace it. But then I had to. And that turned out to be a good thing as it was frayed for an unknown reason much higher up.

Awesome video thank you sir, for taking the time to make this

@garagedoorgenius

2 ай бұрын

You're welcome!

Great thanks for the info Bro watching from Jamaica 🇯🇲

@garagedoorgenius

Жыл бұрын

Hell yeah! Thanks for watching.

Thank you! great video, I'll try this fix.

@garagedoorgenius

Жыл бұрын

🙏

Thanks dude its simple and easy then other darma videos LOL

@garagedoorgenius

11 ай бұрын

A lot of other vids on this just suck. Glad my vid helped you out! Thanks for the comment.

Thanks man , one project that needs to get done.👊🏼

@garagedoorgenius

10 ай бұрын

You got this bruv! 👊🏼

excellent... thank you and I pray for all the happiness in the world for you and yours.

@garagedoorgenius

Жыл бұрын

Thank you for the very nice comment. 🙏

@karimnanji4163

Жыл бұрын

@@garagedoorgenius You are welcomed.. change the world one person as a time.

@garagedoorgenius

Жыл бұрын

@@karimnanji4163 ❤️🙏

Absolutely fantastic thanks Mate!

@garagedoorgenius

9 ай бұрын

Glad to help! 👍🏼. I appreciate the awesome feedback.

Great video. You spoke really clear.

@garagedoorgenius

2 жыл бұрын

Thank you! 🙏

Straight to the point! Great video

@garagedoorgenius

Жыл бұрын

I really appreciate the feedback! 👊🏼💯

Thanks bro I fixed my garage door ☺️

@garagedoorgenius

3 жыл бұрын

Awesomeness! 💯👊🏼

Thanks for the help! I ordered those cables for my 7ft single garage door. And I’m having an issue hooking it on to the metal circle. I feel like the hook is too small, compared to the old cables the hook is smaller. Any tips? TIA!!

Thank you very good clear and fully detailed video.

@garagedoorgenius

2 жыл бұрын

🙏

Great video. Thanks for the update.

@garagedoorgenius

3 жыл бұрын

You're welcome Michael 😁! Thank you for checking it out. 💯👍🏼

That’s awesome man. Thanks for the video

@garagedoorgenius

3 жыл бұрын

You're welcome! Hope it helps.

Such a helpful video! Thank you!

@garagedoorgenius

3 жыл бұрын

👍🏼

Thank you!!! Fixed it really quick

@garagedoorgenius

Ай бұрын

Awesome job getting it fixed! 👍🏼

Thank you this worked for me🔥🔥🔥💪🏿💪🏿💪🏿

HI, I got one of the tensioner cables snapped, and now i bought the new tensioner cable, please let me know if I have to just open the door and put the cable as you have shown in the video or do I have to reset the coil also for that side also? is the coil still having tension in it or it get released once the wire got broken?

Perfect explaination. Thank you!

@garagedoorgenius

Жыл бұрын

You're very welcome! Thanks for the comment and watching. 🙏

Wow .. Excellent video

Hi Garage Door Genius, thanks for this video .Quick question, there is a part that goes over the pin that the cable is on, on the side bottom of my door, which then seems to run under the black bumper thing that runs all the way across the bottom of the door -- so I wouldn't be able to just pull the cable off the pin. Ever seen that? Any suggestions? (I was going to try to post a photo but I see I can't do that on here.) Thanks!!!

I learned the hard way but first I found out you can't put too much tension on the cable, I gave it a 360 revolution of tension and my door didn't want to stay down haha, then they fail to mention that one side of the wheel where you roll the cable on is clockwise and the other side is counter clockwise haha. So I had to load the cables on the wheels 3 separate times both sides for a total of 6 haha, but I can say now I know how to replace cables in garage doors. But thanks for the video at least it gave me a blueprint general idea of how to do it

@garagedoorgenius

2 жыл бұрын

Anything that you haven't done before is a learning experience for sure. Good job sticking with it and figuring it out. 👍🏼🙏

@velmabellerose7704

2 жыл бұрын

I didn’t know about the counterclockwise and clockwise. Could that be the reason my door doesn’t want to stay up now?

@StevenPG72

2 жыл бұрын

@@velmabellerose7704 The best way to replace that cable was like the video, when the door is open but I still needed a little more tension so I rotated it a full 360° and it was just right

@garagedoorgenius

2 жыл бұрын

🙏

just wondering for single car garage, will it work if I don't install the spring nor cable since I don't have enough head room? I know the door won't stay but I only use the garage for storage and I can use something to lock the door into position once opened.

Amazing, thank you brother

@garagedoorgenius

Ай бұрын

No worries my guy! 👊🏼 Thanks for the comment.

I really appreciated you help sir. Thank you so so so so much!!!

@garagedoorgenius

2 жыл бұрын

Glad to help, Queen 🙏.

Great video, thanks for spending the time

@garagedoorgenius

11 ай бұрын

Glad to help!

Thank you for this.

@garagedoorgenius

5 күн бұрын

@@daedalline glad to help!

Thanks bro,you just solved my problem

@garagedoorgenius

Жыл бұрын

Glad to help, Rodney! 💯👊🏼

So I have to replace my two bottom panels and just wanted to know if I bring the garage door up like how you have it and remove the wire as seen, will it chop my fingers, etc… off since the tension spring is still hot? Thanks.

Great information, but if the drum is close to the wall and there is no room to reach the drum when the door is open. What I should do?