√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

Phew! Harder than it looks! I hope it lasts because I don’t want to install that again! Thanks for the video. 😊

One thing I always did when I was a tech. Once I got a component installed I tested the new component before reinstalling all the brackets and trim pieces. You would be surprised how many “new” parts are faulty.

I'm repairing my wife's 12 wrangler, this was perfect. You guided us with everything we needed to know. Thank you.

This is the right video!!! 2014 JKU, done in 30 minutes, $30, with one stop to rewatch one part. Thanks for posting.

@TRQ

9 ай бұрын

+Doug Busey Thanks for the feedback! 1aau.to/m/Shop-TRQ

After watching your video I replaced it in about 2 hours. Thank you for the video. You are the man!!

Great camera work and instruction. I’m allot more comfortable about this repair now. Thank you.

Thanks - took 40mins and 3 cramped fingers 👍

Great video! Thanks so much. I can’t stand these actuators as I had them break in all my GM cars and now have had one break in my wrangler. They’re just annoying to replace. At least this one is accessible somewhat.

Excellent video! Thanks for making it.

Very helpful thank you

Thank you for your time and video ,your are best 👍👍👍👍👍🍺😎

This is a beast of a job but great video . Thank you .

You can also pull that floor vent off it pops out and you have a clear view of everything it made the job alot easier for me

@jamescampbell7509

Жыл бұрын

How it doesn’t seem to want to move for me

@filippellijr

Жыл бұрын

same here. does not move, got half off. believe me i am pulling

Very helpful just replaced after watching

is that the side you replace if you hear from right side? great video

Great video but I might add it doesn’t appear to be 2007-2017 as I have a 2011 and it’s a little different.

How do you do the one behind the glovebox

What if the missing tooth doesn’t match up exactly with the old actuator?

I replaced mine with your help about a year ago and then I noticed that now the Ac is either Cold or very Hot. No in between… I ordered another actuator and have not installed yet. I'm hoping it is bad and will work with the new one.

Can anybody tell what size the 3 screws are that hold the actuator in? I’ve lost mine and I’m having a time trying to figure out what size screws I need for it!!

What's caused for this replacement beside its not working? Any symptoms?

The component at 2:35 which you disconnected. What is that component called/for?

Does anyone know what the actuator is called that this actuator connects too?? The one with the track that the arm runs along

The suck factor was high on this project. I did the drivers side today. I also took apart the faulty actuator and found no feed back position sensor or potentiometer. It was just a motor and gears. Therefore it must not matter where the arm is as long as the pin is in the right slot. Position feedback must be coming from somewhere else.

Did you remove the seat?

Is this the same for 08?

This isn't the actuator that's directly to the left when you pull the glove box is it?

@richardwolfe8752

Жыл бұрын

No

Just letting y’all know this does not look the same on a 2009 Jeep Wrangler

Mien is a 2013 jeep wrangler were would mien be at

My 07 has old-style vent buttons. Will the other parts be different as well or is everything the same behind the dash?

@aubreehunter479

Жыл бұрын

i’ve noticed it’s all different

2012 different as well

My hands are too damned big to get back there. How do you remove that metal bracket that the plate was mounted on?

Yeah definitely not the same on a 2009 Jeep JK that is nowhere to be seen

This is not what the steps are for a 2013 ultimate, the clearances are way different and you have to remove additional brackets and the vent cover to get access. There are better videos. Trying to change the actuator after watching this, it was incredibly frustrating. Go elsewhere.

Just payed over $400 at doge dealer 🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️

Why are you wearing latex gloves on a dry heater box? Lol.

How many time can you say "wanna go ahead" in one video?

Say module one more time MF!!! 5:27

This video is way too confusing, he thinks everyone knows it like he does, no! There’s easier videos on here.

Terrible instructions