how to replace an Anderson window crank ( quick/easy )
Тәжірибелік нұсқаулар және стиль
how to/tips on removing and replacing an Anderson crank on casement window. This specific replacement measures 8 -3/8" and part # 1361312
don't forget to SUBSCRIBE thnx
- new anderson 8-3/8 left crank- amzn.to/2XWAtMI
- new anderson 8-3/8 right crank- amzn.to/3p1zLtg
*Support this Channel @*buy me a beer*-www.buymeacoffee.com/danshaffneX
*GTTP merch- www.teepublic.com/t-shirt/213...
Пікірлер: 25
This is just like my windows and thanks for the tutorial. Particularly the left & right advice was very helpful!!
I have watched numerous videos on how to remove the covers, but this was the first one I found that suggested removing the bottom trim. I just wanted to remove the covers to paint the window trim so just loosening the trim was enough for me to get the covers off. I was extremely frustrated trying to get the covers off before seeing this video. I cannot thank you enough!!!
@GetToThePointplz123
Жыл бұрын
That's awesome 👍
Wow, I wish removing that bottom trim piece was so easy. Popped off like magic!
Great Video! Better than any other Cheaper then replacing Window!
Very helpful! Thanks for the video!
Thank you for the valuable information.
Very good instructions
Thanks for posting this video. I was thinking I would have to buy a new window.
Thank you. Just bought a house and I need to do this
@dwightsbeats4274
2 жыл бұрын
Same, on two windows...next to each other...sort of annoying tbh lol
Thank you. Worked perfectly
@GetToThePointplz123
Жыл бұрын
Awesome 👌
Thx..might want to clean thos windows once a year or so! :)
I have a quick question: what if I cannot find the crank anymore and I find another one with a shorter arm do you think I can use it?
@GetToThePointplz123
10 күн бұрын
@@crisbojinca5893 I would think it wouldn't open as far? But I'm not sure?
Can you replace them with another brand/make?
@GetToThePointplz123
Жыл бұрын
You might find a universal one but no guarantees it will fit properly
I can’t remove my casing behind the crank It’s got a set screw. Removed that and crank arm handle came out but cannot get that plastic casing out
@GetToThePointplz123
3 жыл бұрын
Try a flat screwdriver under it and pry up should pop off
@johnc1280
3 жыл бұрын
@@GetToThePointplz123 I thought of it but didn’t want to damage wood underneath. I’ll try to slide cardboard under it first
@johnc1280
3 жыл бұрын
@@GetToThePointplz123 took some elbow grease but it popped off. Used a wide chisel braced with cardboard underneath
Anyone know what model of Anderson window this is? I have to replace a few of them and would prefer to use the same ones!
@GetToThePointplz123
Жыл бұрын
Order 1 to make sure it works on your window and go from there, I do think alot of their windows have the same hardware
@whelenvortexr4
4 ай бұрын
It's the 400 series