How to replace Aeg washing machine door seal or gasket 2012 onwards
Get your appliance fixed faster! Click the link below to browse our supplier's huge selection of appliance parts and support the channel at the same time! (repairpartstea...)
Tutorial: www.how-to-repa...
This video will show you how to replace a door seal also know as ( gasket, bellow, tub seal, door rubber, etc ) this video is on the new type design where you have to remove the concrete counter weight in order to replace the Aeg door seal.
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going.
Please remember to subscribe to our channel
www.youtube.co...
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or the website on your
timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-
repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels
social media as this really helps my site and keeps us going.
KZread. / apart4u
Facebook. / how.to.repair.appliances
Пікірлер: 23
You, Sir, are a true hero! I succesfully repaired my AEG (about 7 years old) today. I was careful to buy the correct seal, but the rest of the process was more or less the same as in this video. Marvellous!! T he most difficult part was the placement of the inner ring of the seal. I didn't quite got the right method in the beginning. Your zoom-in from 06:05 is essential. It is only about the first lip. Sir, where can I put my money so you can buy a few pints of me?
Worked well for AEG L6FBN84GP (Lavamat 6000 series), there were only few minor differences. Thanks, couldn't have done it without this tutorial!
Thank you so much - you just saved me £200 which I couldn’t afford. Really excellent demonstration. Machine working fine now.
This was very very helpful thank you. I just changed my seal in the AEG washing machine. I didn't remove all the parts you did, just the front, top, panel, door and counter weight. So far no leaks or errors!
@How-to-repair
2 жыл бұрын
Glad it helped Thank you For leaving a comment this is for you kzread.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Dear Paul, thank you for your tutorial video. I had a bra wire stuck between the inner and outer drum. With your help I have fixed it! Thnx, enjoy 2 beers from me. Kind regards, a happy 'AEG Heat Pump ÖKOKombi Plus Wash & Dry' owner.
Excellent video and instructions! Used to change the door seal on an AEG L69480VFL. Straightforward!
@How-to-repair
4 жыл бұрын
Can you do us a favour and please share this video on your timeline. This will help other people who can’t get engineers out to help them. kzread.info/dash/bejne/pHqtqaOBhqm7h5s.html&t Stay safe
I didn't think I had to dismantle the whole thing 🤔 Thanks for the video.
Super thanks! Like Lego for adults
Thank you for saving :-)
Thank you!
Very well done!
Brilliant! Thank you.
Thx a lot, its the same for AEG LAVAMAT 88830?, THX A LOT
These are great and very helpful video's. Thank you for that. I am about doing the same for an older 2003 model AEG L74640 Update. I removed the front panel and I am facing the contraweight now. Does it have to be removed for these older models as well in order to install the seal? I am affraid to rip of the mounting pins which are pretty deformed. And because of the deformed pins, I will have a hard time re-installing the contraweight?!
@How-to-repair
2 жыл бұрын
if you send your number via website i will try and help
@marNL1970
2 жыл бұрын
@@How-to-repair Thank you for responding. This applies to a 2003 model AEG L74640 PNC 91400240000. I first tried to fit the new door seal with the concrete block still attached to the front but I quickly found out removing was the best option. The deformed pins gave me a hard time sliding of the concrete block from the drum. I finally solved that getting a hair dryer and heating up the pins slightly. This gave the pins some flex and after that it was easy to slide the block from the drum. Without the concrete block it was a breeze to install the new door seal. I cleaned the holes in the block and the mounting pins at the drum. Over the night I did put some clamps on the pins in an attempt to squeeze them back. Before re-installing the block I put a bit dishwasher soap in the mounting holes. With an extra pair of hands which hold the drum into position, the concrete block returned quite easily back to its position at the drum and I was able to finish the job successfully. Happy washing again. These machines are still repairable despite their age and as long as I can get parts I will do so when needed. Your repair video's are a gem, thank you for these!
Can you tell me how to replace a drum paddle on a 2018 AEG 6000 series Lavamat? Do you just pull them forward? Not sure if they screw in or clip in.
@How-to-repair
Жыл бұрын
You will need to contact us through the website, but you will need to use your full details Hi @TOMLINBISH I will need the full model number of the identification plate please use our contact us page and make sure you fill out the request of what part you are after and will get back to you within 24 hours normally www.how-to-repair.com/help/contact-us/ this is for you kzread.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
Hi ,thought I had done it correctly ,but my new seal does go back to the wall of the machine so it is impossible to fit the spring without pulling the seal off ???.
@How-to-repair
Жыл бұрын
This is where you do need a second set of hands you must remember I have been doing this nearly 35 years, so it looks easy for me, but I do realise it can be difficult glad we could help you @mjtedclayton this is for you kzread.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
@mjtedclayton
Жыл бұрын
@@How-to-repair Have done as you said ,think everything is O.K. now ,thank you.