Another wonderful day on the farm. Stuff breaking, stuff getting fixed up. How to replace a ship position sensor on a Honda Rancher ES 4 Wheeler
Жүктеу.....
Пікірлер: 50
@genebodenberger2 жыл бұрын
Thank you so much. I got the cover off just fine with a 19mm socket and could not figure out what size socket to use for the sensor itself. You saved me a bunch of time and frustration letting me know it was a 4 metric allen.
@rexstokes54564 жыл бұрын
Thank you friend that was real helpful
@farmcards
3 жыл бұрын
I’m glad it was helpful
@marshellgupton21173 жыл бұрын
Thanks for the video
@NelsonCreekCustoms4 жыл бұрын
Great video, should've washed it before the repair that sucker looks like it was buried in a hole 3 days ago
@donaldhinson76482 жыл бұрын
Hey your video is good just turn your volume up or speak louder
@2ndShiftMaintenanceandRepair7 ай бұрын
Anyone have one that shifts up fine but won’t shift down? I can hear a click but no more
@rosswilliams4883 жыл бұрын
Mine is dying once I shift into 5th gear. Runs great in every other gear. When I reach 5th it sputters, pops, and dies if I don’t down shift back into 4th? Any ideas?
@farmcards
3 жыл бұрын
Sorry. I have not had that happen.
@CbrF4i600cc Жыл бұрын
Could a damaged front differential cause quad to get stuck in 1st gear? I heard grinding noise and now its stuck in 1st gear and won't turn on
@rodrigoruizibanez4231
3 ай бұрын
Prueba a cambiar la marcha manualmente con una llave 13
@FarmallFanatic3 жыл бұрын
Sometimes shifting, I'll get two - - readout. I wonder if it's the angle sensor
@chip_stack
3 жыл бұрын
I have the same problem . Did you end up figuring out your problem?
@ThatBlueHoe
3 жыл бұрын
@@chip_stack I have a 01 honda foreman rubicon 500 and it does - - when in drive, and it will pop and struggle in reverse if that's your problem it is the, gear position sensor, hope this helps.
@farmcards
3 жыл бұрын
Yes. That is the same problem we had. Sometimes if you rock it a little, then it will find the gear and show it. If it can’t find the gear, then I am pretty sure it’s a faulty angle sensor. It’s a very common problem.
@farmcards
3 жыл бұрын
I would bet it’s the angle position sensor. Try rocking the machine a little to see if it can find the gear position before you go through the work of replacing the sensor. Sometimes that can get you by for a little while.
@jbm2152 Жыл бұрын
I have reverse light on and neutral wen in neutral would not let me start up but it does crank
@octaviorobles7230
Жыл бұрын
Did you find where the problem was in your four wheeler I have a 03 and it's doing exactly the same thing I appreciate if you let me know what it was
@bobv62522 жыл бұрын
What issues were you having? I have same 4 wheeler. Mine won't shift and no N on dash.
@brettrice8858
2 жыл бұрын
I’m having same problem, have you figured out anything?
@farmcards
2 жыл бұрын
That is exactly the problem we were having
@youngmanb3 жыл бұрын
What were your symptoms? Would it shift but not move? Or would it just not shift? Thanks
@farmcards
3 жыл бұрын
It would not show any gear position on the screen, and it would not shift.
@AceMendez503
Жыл бұрын
Mines is doing that! Shifts gears but won’t move only moves a tab but what could it be?
@demoman5506
9 ай бұрын
@@AceMendez503did you figure it out man? I have the same issue
@Bob-gn8ph2 ай бұрын
❤John 3,16 ❤
@davidthurmond24663 жыл бұрын
May be my problem I did not spring load mine when I put it back on
@dougadkins
3 жыл бұрын
How did you spring load?
@farmcards
3 жыл бұрын
You line up the half moon opening on the shaft, then turn the sensor so the holes line up.
@FarmallFanatic3 жыл бұрын
I kind of have the same problem except I'm stuck in 5th gear.
@farmcards
3 жыл бұрын
Sorry to hear that
@FarmallFanatic
3 жыл бұрын
@@farmcards I was able to rock it n get it down into neutral, but something's definitely messed up in this transmission and I think it might be the shifter plate.
@moyo2476
3 жыл бұрын
Farmall Fanatic did u figure it out? I’m dealing with the same problem and don’t know what it is
@misibrown7525
3 жыл бұрын
Have you tried replacing the shift motor and cleaning the gears behind the shift motor plate? That seems to be a common problem if not the angle sensor. I’m working on that just now with my 2000 Rancher.
@shaneadkins9594
Жыл бұрын
There is a bolt on the trans to manually shift it
@dustydollarhide78983 жыл бұрын
Mine just died and it isn't displaying at all in the screen and buttons don't make sounds when you try to shift
@farmcards
3 жыл бұрын
If it is just displaying “-“ where it shows where the gear should be, try rocking it back and forth. Sometimes it is just between gears. If it still doesn’t work then it’s probably a bad position sensor.
@zeekzimmerman87552 жыл бұрын
is that the front or the back
@farmcards
2 жыл бұрын
front
@johnwalters7415 Жыл бұрын
Did you need to reset anything
@farmcards
Жыл бұрын
no
@2015_Rubicnn Жыл бұрын
Isn't that the angle sensor?
@SnowleopardPearl
Жыл бұрын
that is what it is.. thats an angle sensor. some bikes called it a positon sensor some called it a angle sensor my forman 450 the manual is angle sensor but uses the same part number
@shaneadkins9594 Жыл бұрын
Mine isn't there
@michaellinkous7449 Жыл бұрын
Mine flashes 3 times in neutral and wont change gears
@mannynieto21
Жыл бұрын
I have the same problem you have. Did you figure it out, Thank you.
@chriseiden2674
11 ай бұрын
@@mannynieto21 Thats code number 3. Gear position switch system.
@AustinWhite-iy4py Жыл бұрын
I did exactly what you explained and it didn’t fix the issue. Mines still stuck in neutral and flashes 3 times.
@farmcards
Жыл бұрын
That must be a different issue. There is also a speed sensor that could be causing your problem, but those don’t seem to fail very often. It’s possible you have a harness problem, or an issue with your plug.
@AustinWhite-iy4py
Жыл бұрын
Can you post the link to the sensor you bought in this video?
Пікірлер: 50
Thank you so much. I got the cover off just fine with a 19mm socket and could not figure out what size socket to use for the sensor itself. You saved me a bunch of time and frustration letting me know it was a 4 metric allen.
Thank you friend that was real helpful
@farmcards
3 жыл бұрын
I’m glad it was helpful
Thanks for the video
Great video, should've washed it before the repair that sucker looks like it was buried in a hole 3 days ago
Hey your video is good just turn your volume up or speak louder
Anyone have one that shifts up fine but won’t shift down? I can hear a click but no more
Mine is dying once I shift into 5th gear. Runs great in every other gear. When I reach 5th it sputters, pops, and dies if I don’t down shift back into 4th? Any ideas?
@farmcards
3 жыл бұрын
Sorry. I have not had that happen.
Could a damaged front differential cause quad to get stuck in 1st gear? I heard grinding noise and now its stuck in 1st gear and won't turn on
@rodrigoruizibanez4231
3 ай бұрын
Prueba a cambiar la marcha manualmente con una llave 13
Sometimes shifting, I'll get two - - readout. I wonder if it's the angle sensor
@chip_stack
3 жыл бұрын
I have the same problem . Did you end up figuring out your problem?
@ThatBlueHoe
3 жыл бұрын
@@chip_stack I have a 01 honda foreman rubicon 500 and it does - - when in drive, and it will pop and struggle in reverse if that's your problem it is the, gear position sensor, hope this helps.
@farmcards
3 жыл бұрын
Yes. That is the same problem we had. Sometimes if you rock it a little, then it will find the gear and show it. If it can’t find the gear, then I am pretty sure it’s a faulty angle sensor. It’s a very common problem.
@farmcards
3 жыл бұрын
I would bet it’s the angle position sensor. Try rocking the machine a little to see if it can find the gear position before you go through the work of replacing the sensor. Sometimes that can get you by for a little while.
I have reverse light on and neutral wen in neutral would not let me start up but it does crank
@octaviorobles7230
Жыл бұрын
Did you find where the problem was in your four wheeler I have a 03 and it's doing exactly the same thing I appreciate if you let me know what it was
What issues were you having? I have same 4 wheeler. Mine won't shift and no N on dash.
@brettrice8858
2 жыл бұрын
I’m having same problem, have you figured out anything?
@farmcards
2 жыл бұрын
That is exactly the problem we were having
What were your symptoms? Would it shift but not move? Or would it just not shift? Thanks
@farmcards
3 жыл бұрын
It would not show any gear position on the screen, and it would not shift.
@AceMendez503
Жыл бұрын
Mines is doing that! Shifts gears but won’t move only moves a tab but what could it be?
@demoman5506
9 ай бұрын
@@AceMendez503did you figure it out man? I have the same issue
❤John 3,16 ❤
May be my problem I did not spring load mine when I put it back on
@dougadkins
3 жыл бұрын
How did you spring load?
@farmcards
3 жыл бұрын
You line up the half moon opening on the shaft, then turn the sensor so the holes line up.
I kind of have the same problem except I'm stuck in 5th gear.
@farmcards
3 жыл бұрын
Sorry to hear that
@FarmallFanatic
3 жыл бұрын
@@farmcards I was able to rock it n get it down into neutral, but something's definitely messed up in this transmission and I think it might be the shifter plate.
@moyo2476
3 жыл бұрын
Farmall Fanatic did u figure it out? I’m dealing with the same problem and don’t know what it is
@misibrown7525
3 жыл бұрын
Have you tried replacing the shift motor and cleaning the gears behind the shift motor plate? That seems to be a common problem if not the angle sensor. I’m working on that just now with my 2000 Rancher.
@shaneadkins9594
Жыл бұрын
There is a bolt on the trans to manually shift it
Mine just died and it isn't displaying at all in the screen and buttons don't make sounds when you try to shift
@farmcards
3 жыл бұрын
If it is just displaying “-“ where it shows where the gear should be, try rocking it back and forth. Sometimes it is just between gears. If it still doesn’t work then it’s probably a bad position sensor.
is that the front or the back
@farmcards
2 жыл бұрын
front
Did you need to reset anything
@farmcards
Жыл бұрын
no
Isn't that the angle sensor?
@SnowleopardPearl
Жыл бұрын
that is what it is.. thats an angle sensor. some bikes called it a positon sensor some called it a angle sensor my forman 450 the manual is angle sensor but uses the same part number
Mine isn't there
Mine flashes 3 times in neutral and wont change gears
@mannynieto21
Жыл бұрын
I have the same problem you have. Did you figure it out, Thank you.
@chriseiden2674
11 ай бұрын
@@mannynieto21 Thats code number 3. Gear position switch system.
I did exactly what you explained and it didn’t fix the issue. Mines still stuck in neutral and flashes 3 times.
@farmcards
Жыл бұрын
That must be a different issue. There is also a speed sensor that could be causing your problem, but those don’t seem to fail very often. It’s possible you have a harness problem, or an issue with your plug.
@AustinWhite-iy4py
Жыл бұрын
Can you post the link to the sensor you bought in this video?