I did it!!! It took me about an hour, although it felt much longer. Tears of frustration and a bit of cussing. My hardest parts were getting rhe faucet loose from the sink and getting the old supply lines off the faucet. Vice grips, small slip joint pliers, and some wd40. Go me!!! I'm almost 65, living in an old house trailer. Cold water in the kitchen is the first of many projects. Thank you so much!!

@ShowandTellVideo

10 ай бұрын

Great job!

@7cats2

3 ай бұрын

You go girl!!!!😊

@DriveWithEli

3 ай бұрын

😊

@paulatiredofthisshit

2 ай бұрын

You go, girl!!

@lisafaulx9738

2 ай бұрын

I am going to do it myself as well! Wish me luck!😊

That "go back to the hardware store because you didn't measure" got me right in guts! 🤣

@brandonrichetta8919

2 жыл бұрын

My signature move

@pattimcb31

2 жыл бұрын

Heck that's me I never make one trip

@justinkearney1081

2 жыл бұрын

Same, just had to do just that

@ChristopherGreerCDN

2 жыл бұрын

This is how I knew this was the most truthful DYI video on the subject

@ericwootton2

2 жыл бұрын

Yep, it wouldn’t be a real DIY project unless I have to go to Home Depot at least three times.

you did a great job explaining this. I am a 64 yo single woman, and I am getting ready to attempt this by myself. Your video is encouraging that I can do this. Fingers crossed and a few prayers 😊

@ShowandTellVideo

11 ай бұрын

You can do it!

@terrimarcum7214

11 ай бұрын

@showandtellvideo I did it and it works Yay, and Thank you

Bro, I was so pissed trying to install this thing. Your chill ass video calmed me down. Thanks!

This was much more simpler than the home depot video. Thank you!

@bobbyteah4596

2 жыл бұрын

I just watched that video too 🤣...Way More Complicated Than It Had To Be 🤦🏿‍♂️

@kristycostea8718

Жыл бұрын

​@@bobbyteah4596❤

❤❤❤ I am a widow and a senior person. God bless you for straight forward instructions!

@ShowandTellVideo

9 ай бұрын

Glad it helped!!

@earhustler2639

6 ай бұрын

My condolences

I just changed my very first faucet using this tutorial.. I'm so proud of myself 😁 I couldn't have done it without you. Thank you.

@ShowandTellVideo

7 жыл бұрын

Excellent! I’m proud of you too! :)

@bachrocktheamericahatersan5799

7 ай бұрын

I need to do the same thing. Did you have assistance? I don’t have long arms.

Step 1: start early in the morning. Step 2-9:make frequent visits to the hardware store before they close. step10: go to bed early to continue tomorrow.

@sdiva77

Ай бұрын

😂😂😂

Love your straight to the point video and sense of humor. Thank you for not taking an hour to explain. Great work. 😁

This video gave me the guts to feel confident about replacing my broken faucet. I even used the vice grip pliers. It was so rusted I had to remove the entire sink to get the grip and room to actually remove it. But your video is so unbelievably helpful especially reminding to measure the connector lines. Thank you so so very much!

THIS is how you do a tutorial! 🙌🏽🙌🏽🙌🏽🙌🏽

@ShowandTellVideo

6 жыл бұрын

Thanks! :)

@chrisgomez896

3 жыл бұрын

@Ascended Fitness np

@stuffsomedumb5665

3 жыл бұрын

I’m in the first 30 seconds and I already appreciate the conciseness

Thank you so much for this video! I didn’t have anyone to call to fix my faucet and local plumbers were booked out so I decided to tackle it myself. I followed your video step by step and did it!! So again, thank you!!

And 5 years later this vid still kicks ass thxs dude. Just had my sink broken this morning and 45 mins later fixed it.

@ShowandTellVideo

4 жыл бұрын

Thanks! Glad you got it fixed in record time! Apparently, you didn’t have to make an extra trip to the hardware store.

@Gh0stRider00

4 жыл бұрын

@@ShowandTellVideo nope, my sister was relieved that we didn't have to call a plumber.

Great video! Lovin' your honesty and imperfection since I thought I was the ONLY person who had to go back to the hardware store more than twice! Thank you for this most helpful upload!

Super helpful! Made it so easy a stay-at-home-mom with no plumbing experience did this in less than an hour with no issues. Thanks!

i think you have the only video on youtube with no negative comments! congrats bro! it was a great video simple to the point and with just the right amount of humor .

@ShowandTellVideo

7 жыл бұрын

Thanks, John!!

"Step sixteeeeeen" 😂😂😂

@thaintriguing1

3 жыл бұрын

I’m still waiting for Step “Seventeeeeeeen”

@viskotheturtle4084

2 жыл бұрын

My thoughts exactly! 😅🤣 Great informative video nonetheless!

@sandrapuentes9717

2 жыл бұрын

Step oneeeeeeee

This was the best DIY video I have seen to date! Very easy to follow, short and to the point, expressed the importance of “measure twice cut once,” and somehow managed to get really clean easy to see shots beneath the sink! Wow! Many thanks!

@ShowandTellVideo

8 ай бұрын

Thanks! Glad it was helpful!

Straight to the point, simple enough for a novice like me to understand, good video quality, and funny to boot! Thanks so much!!

Great Tutorial! This would have been so much easier if the people that installed our original faucet didn't tighten the bolt so tight to the faucet bracket. It took us 3 hours to get that thing unscrewed and we had to go buy a better tool to get it off, but finally came off and of course we ended up having to go buy new hose/lines, because ours were also too short, wish I saw this video before I bought the faucet...LOL..all good now and got my new faucet installed and very pleased. Thanks for an easy video!

@ShowandTellVideo

7 жыл бұрын

Thanks! Yeah, I had the same issue. Glad you got past the hard part! :)

Loved the humor and real world implications. Thanks for making this short yet detailed focused on the subject.

I just replaced our kitchen faucet. I planned on one hour or so. . . well, three hours latter and a trip to the hardware store to buy new lines and I was done. The hardest thing was trying to loosen the old plastic water rings with a plumbers off set wrench. Boy was that hard! Most things take longer than originally planned. I sure am glad that is done. This was a great video. I wished I would have watched it first. I did the replacement in the order that is shown here. The newer facets have a 6" copper drop down to make the replacement much easier. I would strongly suggest a plumbers offset wench before you start your project. Good luck. You pretty much need to be a human contortionist to perform this on a older appliance.

From the time you slowly opened the box like a "big reveal" , I knew I would enjoy this video 😀

@ShowandTellVideo

7 жыл бұрын

Thanks! :)

Great video, far FAR better than the overly complicated Home Depot video. Thank you for making this video, just made my Saturday a lot easier.

Thanks so much! Before faucet looked exactly the same with the black duct tape covering the hole,down to the single handle, the after is moen Banbury double handled faucet. Easy instructions and fast install.

@ShowandTellVideo

6 жыл бұрын

Congrats!! :)

Great tutorial! Upon starting a project, I usually discover that I'm missing an essential tool or piece for the job and it's off to the store I go. Never fails lol!

@ShowandTellVideo

7 жыл бұрын

Lol! Me too!

One of the best, and funniest, how-o videos I've seen!

I have to replace my mom's sink faucet as I am trying to save her money. Watching your video, I just ordered the tools I'll need from Lowes plus the extra Supply lines just in case, so I can tackle the job tomorrow without having to stop and go back to the hardware store. I'll have everything I need to do the job. Thanks for your video!!!

My friend's mobile home had a 3 hole kitchen faucet. I borrowed a plumbers flip sliding wrench. Didn't have much luck. I had to go home and get my 1⅛" Mac crowsfoot. It'll fit most faucet nuts & toilet supply lines. Perfect fit for the older hex nuts. It'll catch the newer 4 wing plastic nuts. It won't fit the ones under the faucet base. (The top nuts) I had to use pump plyers. My new faucet said to use a silicone or latex based sealant when installing on the new threads. Pipe dope or plumbers putty will ruin the plastic. That's a first. Teflon tape will only work if you can get a super thin layer. It can split the nuts if you put too much. Silicone it is. You need to let it sit a few hours before turning the water on. Check for drips. I was good.

Lol, go back to the hardware store for longer hose, lmao!!!

straight to the point, the best video for this project on KZread

Had to replace a cheap faucet that leaked in the house I just purchased. Bought a Moen, and with this great video took me 45 minutes to remove the old faucet and install the new one. Thank you for providing this easy to follow instructional video. 👍👍👍

Fantastic guide! Lead me straight through the process, and had my new faucet running in under an hour. Thanks!!

You made me laugh a couple of times when you were honest about measuring etc., lol Thank you for keeping it real!

Awesome tutorial,easy to follow,and the number of steps had me laughing so much. 😂😂😂👍🏻👍🏻👍🏻👌🏻👌🏻👌🏻✌🏻✌🏻✌🏻.

Thanks this gave me the confidence needed to get this done at my house. Simpler and faster than i was expecting

@ShowandTellVideo

6 жыл бұрын

Very glad to hear! :)

This was very helpful in replacing my faucet. Thank you very much for posting this!

This video was a life saver! I qas so proud of myself! Couldn't have done it without this awesome, simple and to the point viedo! Thank you so much!

Thank you so much for this step by step video. I was able to change my kitchen faucet all by myself (with your help lol)! Awesome!

GG i liked the commentary. It was short but funny. 🤣 it also helped me a lot to tackle replacing our faucet.

Short and sweet with all the essentials. Thank you!!

@ShowandTellVideo

5 жыл бұрын

Great! :)

Thank you for this!! Struggling to do some things on my own, without family around. This made it nice and easy.

@ShowandTellVideo

10 ай бұрын

Glad it was helpful!

Simple and straght to the point. Thanks!

Thanks for the video tutorial... I was able to use it to help me replace mine. I got lucky and had the exact same replacement faucet you have. I SUCK at being a handyman of any kind so I depend on KZread for help.... thanks a bunch!

@ShowandTellVideo

7 жыл бұрын

No problem! You and me both! lol! That’s the first and only faucet I have ever replaced, so..yeah, anyone can do it. Glad the video helped!

Thank you for this tutorial, finished this In about an hour, no 2nd trip necessary❤

@ShowandTellVideo

Жыл бұрын

Great job!

Your video has helped yet another clueless couple fix their leaky focet! Thank you!!!!!!!

Thank you! ANd OMG had me laughing at Step #14 when you talked about upgrading supply line because you didn't measure!!! I'm lmao thanks for making my day!

I wasn't expecting a laugh AND great instructions, but here we are. Thank you for this!!!

the editing in this is beautiful 😂

@ShowandTellVideo

5 жыл бұрын

Thanks! :)

Thanks man this video was simple and straight forward

You where right down to the "I bought wrong length of hose" like lol

@ShowandTellVideo

7 жыл бұрын

Lol! Yep. I could have left that out, but I’m trying to keep it real to show that even an amateur could complete the job.

@i4ni2th4a2th13

7 жыл бұрын

I really did have to go back and get the right size cus it was shorter piping

@karmafields6229

6 жыл бұрын

Show and Tell this happens alot with many projects. Kudos for keeping it real, that what most of us here are looking for 👍😊

@dphilipson

3 жыл бұрын

@@ShowandTellVideo and it really helped!

Thank you. Very easy to follow and not long & drawn out. Also, I love that you used 1 tool. I'm so doing this in about 10 min. 👍

@MadameCasper

5 жыл бұрын

And I'm done. Success. 1st ever faucet install. 1 tool. Thanks again

Thank you for this video! I just replaced my faucet today with the help of this video.

@ShowandTellVideo

Жыл бұрын

Glad it helped!

I didn't know that I should have bought the same faucet my service lines didn't add up but you saved my ass thank you for your video

@ShowandTellVideo

6 жыл бұрын

No problem, Reggie! Glad it worked out!

you need to get an agent and do these commercial narrations for home depot, lowe's, and any other hardware store. i love this video thank you :)

Pretty sure this is the exact same model (and definitely the same problem) I have right now! Perfect video

excellent video not without humor ! you got me buying the Caldwell as well.

I like this tutorial video, clear and short. Good job.

Awesome video thanks for sharing! I’m going to attempt to change my kitchen sink out soon, this is definitely going to help out. I bought a basin wrench, I also have vice grips but I know I’m going to make at least one trip to the hardware store!

I laughed so hard when you said helpful tools has some type of cup with a lid 😂😂 that cup is plumbers putty I think or that's what I read it as

@samiches2008

3 жыл бұрын

Correct! That "cup with a lid" is the plumbers putty that he never used... Yes, he may get water from his faucet, but it wasn't installed properly. Eventually, he will get moisture buildup under the faucet just like his old one had. You can tell by the corrosion. He must have installed the old one, too. Also, he used teflon tape on the threads of a compression fitting. Yep...the internet is full of self-proclaimed experts teaching people the wrong way to do things.

@RDfloydify

2 жыл бұрын

I was looking for this comment! When I first saw my box I was like wth is that!? It would be nice if they labeled it. I just so happened to watch an episode of this old house and they used some and was like o ok let me go get some 🤦🏾‍♀️. I would have never known bc they don't label it in the box or instructions.

Ok. Wish me luck. I’m a 72-year-old little lady and I can and will replace the faucet myself. Boy is it tight under here! Good time to clean under this sink. Don’t even know what half these chemicals are. Lol. Well, here goes.

About to change mine out. This put me at ease dude, thank you!

@ShowandTellVideo

5 ай бұрын

No problem 👍

Hell Yeah! I just attempted this and was successful thanks to your vid! Thanks man!!

@ShowandTellVideo

5 жыл бұрын

Awesome!! :)

this seems so simple to do thank you for sharing even though it's 2023

@ShowandTellVideo

10 ай бұрын

You’re welcome 😊

This is great. I was looking on getting this same one except in their stainless version

Sir , you’ve just taken ever bit of anxiety I get when my girlfriend adds a “ I can’t wait until we save up for new faucets “ into conversation Your hilarious and honestly so funny I hope I need your help much more in the future 😂😂🤙

No easy, hard only!!!!!with right info.!!!!

Love the 90's vibe😍

Thank you for posting this helpful video

STEP 14....! MAKE SURE YOU PUT PIPE DOE ON THE PIPES BEFORE CONNECTING THE THE HOSE ON SO YOU WON'T HAVE ANY WATER LEAKS !!!!!!!🙂 IT'S VERY IMPORTANT !!!!!!! SO YOU WON'T HAVE ANY WATER LEAKS !!!!!

Outstanding great video

Dude, thank you. Freaking Home Depot’s video was unnecessarily long. Didn’t watch but a few seconds of it. Yours was short and funny.

Great video

oh a real note, thank you so much for this video. Woke up, went to fill my coffee maker, realized my cold tap broke, spun freely..... i just want a coffee....

Sorry for being a stickler, but around the 2:43 minute mark, you can see that they put the Pipe Thread sealer tape (white material on the thread) in the wrong direction. You can tell, because as he is tightening, you can see the white tape coming off. Sure, it will not matter that much as these don't carry much pressure, but with higher pressure you will get a leak.

Mine sprung a leak at the same spot, contacted Moen, they sent me a new spout free of charge and the faucet is now like new. 👍

A basin wrench is great tool to have for the "long reaches". It works at any angle and makes it a breeze. Will set you back about $12.

Thanks. The video really helped out. No problems

I like the way you say the steps lol step fiiiiiiive. I really don't wanna change this faucet.

Can you do more diy stuff around the house? I really learned from this video.😀

@ShowandTellVideo

4 жыл бұрын

Thanks, Phoebe! What would you like to see? If I ever have a moment where I’m forced to stay-at-home for a period of time, I just might make some more DIY videos.

Nice & Clean

Wow!!! So helpful!! Exactly what I needed

@ShowandTellVideo

Ай бұрын

Glad it was helpful!

This was entertaining as well as helpful lol thanks!

@ShowandTellVideo

7 жыл бұрын

Thanks, Kimmy! Glad it helped. :)

You said “some type of cup with a lid” for the image of the tool in the install book. You sure thats not a picture referring to plumbers putty ?

@lifeofstrife575

4 жыл бұрын

That's exactly what it is. Available at hardware stores and supercenters like walmart.

@Sitharos

4 жыл бұрын

Naw, that was a cup of yogurt that came as a gift to the customer 😁

@susansudduth786

4 жыл бұрын

@@Sitharos I hate yogurt yuk ! How do I request ice cream Sitharoes??????

@lancelesh2384

4 жыл бұрын

HighVisi0n 8

@lagginwagon8267

3 жыл бұрын

That's precisely what I was gonna say. 😂

Great video. Informative and funny.

@ShowandTellVideo

5 жыл бұрын

Thanks! :)

Nice that you had a nice clean area to work in.

Thank you so much for this video, it's was very helpful and had me laughing 😂 👍🏽

Thanks! Looks too easy to someone else do it, and now I believe in myself!

@ShowandTellVideo

5 жыл бұрын

Excellent!! :)

"turn off both the hot and cold, if you dont you will soon find out why 🤣🤣🤣(defiantly pictured myself forgetting to turn the water off 🤣🤣🤣)

Thanks. This was extremely helpful

@ShowandTellVideo

Жыл бұрын

Glad it helped!

Okay, am scanning comments to see if this was asked, but gave up. Do you need to put silicone sealant around or under the faucet on top? I bought that exact same faucet from someone who was redoing theirs so I have a nearly new Moen faucet, but no instructions, thank goodness, except for your video. So silicone? Yes/No? And just around the edge, or underneath the plastic piece too?

This was informative and entertain...and Hilarious!😂😄😂😄Thanks!!!!!

Excellent video, concise, and straight to the point!

Step one hundreeeeeed, love your video man, thanks.

Nice Video Easy And Straight To The Point!

THANKS YOU MADE IT SIMPLE FOR ME !!!!!!

You have a whole lot more space under your sink than I do mine.

You the Man that is Handy Man

Iam terriable on instructions but watching you in how to do it was so simple and pretty relaxing I got this never before have I replace an facuet before I was going to get an plumber which will over price because you don't no no better but thank to you I can do it my self yea

Thinking about following your instructions to replace my kitchen faucet. Am I able to skip step 14?