Quick, to the point, and clear about what you’re doing. Many youtube videos don’t check all 3 boxes and make it difficult when repairing things. Thanks for helping!!

@jaysappliancerepair

6 ай бұрын

Glad it was helpful!

Thanks for taking the time to share this demonstration👍

@jaysappliancerepair

9 ай бұрын

My pleasure!

@elchessboy0wnzuagain

6 ай бұрын

@@jaysappliancerepair Great video. I have the same washer at home. My question is does it need that black box to be replaced or is it the switch (with cables). The PRoblem was its not spinning. Thank you

Thx so much bro for tbis video. I would have spent way more time than necessary without it

@brandon9476

10 ай бұрын

Yes. Everyone else saying take the whole machine apart

@jaysappliancerepair

9 ай бұрын

Glad it helped

I am confused you unscrewed to screws how many really? How do you get the clips at the front of the controls out to pull back?

@jaysappliancerepair

7 ай бұрын

There’s a total of four screws

@don155bp

5 ай бұрын

Can use small flat scraper or spackle tool in front pry up on right and left side

Thank you for this video! I recently had my washer after it finished the spin cycle it wouldn't unlock could it the lid switch? Or something else 🤔

@jaysappliancerepair

6 ай бұрын

It could very well be something else, but if it is the lid switch, you know how to fix it now 💪🏾

@sonnyskustoms

6 ай бұрын

@@jaysappliancerepair thank u very much

Thanks for the video.

@jaysappliancerepair

7 ай бұрын

You are welcome!

Can you share the link where you ordered that one part?

@jaysappliancerepair

5 ай бұрын

Encompass.com, then enter your model number

My lip keeps locking and unlocking every few seconds will this fix it

@ginger7304

5 ай бұрын

Lid*

@jaysappliancerepair

5 ай бұрын

Yes this should fix that issue

Great video. I have the same washer at home. My question is does it need that black box to be replaced or is it the switch (with cables). The PRoblem was its not spinning. Thank you

@jaysappliancerepair

6 ай бұрын

So since I posted this video they have come out with a new latch design that comes with a harness attached, i’m not sure if this will fix your machine, but if the latch is broken go to www.ordergeapplianceparts.com/ and enter your model number for the correct up-to-date part number

Thanks for the video, mine is doing clicking noises, is there any way to override/bypass the switch? I see 3 wires in the connector, could it be a 2 combination of connected wires to send signal to the main board?

@jaysappliancerepair

9 ай бұрын

If you disassemble the switch and remove the striker it should work just fine, I actually just discovered that myself

@jaysappliancerepair

9 ай бұрын

But I must say, do that at your own risk!

Bro Im not sure if we have the same washer but we definitely have the same lid lock. You don’t even have to unscrew the back

@jaysappliancerepair

7 ай бұрын

Maybe, but some of the repair methods I do in my videos are more for show and better angles to explain better. When I’m in the field and I change these latches, I don’t lift up the top. But that’s advance to a beginner

So, to remove the lid. Any idea what type of screw it is

@jaysappliancerepair

7 ай бұрын

1/4 inch hex and a Philip head will do the trick

@charlesvanderwoude8745

7 ай бұрын

Still cannot take lid off