Thanks Steve, I had a different Bosch model with a different matrix, but this perfectly explained how to disconnect the matrix, saved hours of fumbling and breaking bits - Great help

8 years on and this viedo is still relevant. Many MANY thanks from Stockholm for this instructive and clear video. Just started up my machine now, and if it doesn't work I'll replace it knowing that I did everything in my power to fix the cloging etc thanks to you Sean ☀

One of the best explanatory videos I've seen - clear and simple. Gave me the confidence to tackle this job myself after I discovered a squashed drain hose - saved me an engineer's call-out charge, thank you!

Thank you very much!. Although my dishwasher had another failure - related to the flux meter- , your video helped me to mend it successfully.

Thanks for this, exactly what I needed. My dishwasher is slightly different inside with the pipe travelling from the back to the front underneath everything and round to the front so the pipe needed pushed through due to this accessibility issue but all your steps and logic worked a treat. Thanks again.

Just want to say thank you for this video! We have a different Bosch model (SPX68B55UC) and although our matrix looks a little different, the process was pretty much the same. In the end, we didn't need to remove the water inlet hose to disconnect and then reconnect the drain hose, but everything else was the same. We would have never been able to figure this out ourselves, and we were able to save ourselves the time and money of a Bosch service call.

Thank you! I just spend the afternoon trying to find out what was the problem with my dishwasher and had I found your video 5 hours earlier, I might have finished within an hour!

Thanks for this. Replacing the drain hose didn't work for me in the end, and I had to replace the drain pump. But I bought the replacement drain pump from Ransom Spares as a thank you for this video, and replacing it worked perfectly.

You Sir are a star!! Pipes and matrix all cleared, disher workingf again!! I'll bear you in mind for bits in the future....

Thanks, this was really helpful. Inlet hose clip on mine was a bit tricky to get off, very tight, however this video gave me confidence to complete the job myself. Thanks again.

What did we do before KZread? Thank you for the instructions, saved me buying a new machine.

Thank you for this easy to follow video. I just did my drain hose and it was so easy to follow.

We followed your video and we were able to change the drain hose, thanks!

Thank you so much for this. Showed step by step what to do. Easy to follow.

OMG!! You literally just saved us hundreds of dollars on repair man!! Thank you soooo much!!!!

This video has just saved me $$$$ and earned me much needed brownie points with the better half.👍

Great video. Now ready to try & clean out the drain hose. Hopefully will save me from buying a new dishwasher. Thank you! 😁

Adding my thanks. My issue was not draining, running with door open. Stripped down as suggested, found that the red float which operates the micro switch, the drain out of that part that the red float sits in was blocked. I think this meant that the machine assumed that drain was blocked.

Thank you from New York City. That was unnecessarily difficult but you helped it make sense.

Great video and exactly what I needed. Thanks