Bolt for crankase breather hose-5 Nm torgue.Thank's for video.Good job.

@VladGeru

9 ай бұрын

Thank you for correction. I pinned your comment 👍

@rinoce70

8 ай бұрын

Is it necessary to disconnect the hoose in booth side?

@VladGeru

8 ай бұрын

@@rinoce70 yes.

Por recomendación si le hubieras echado una grasa a las bobinas para impedir que gripen con el calor mejor, así para la próxima vez que las quites saldrán más fácilmente 😉

@VladGeru

6 күн бұрын

I know that, but I didn't have at the time.

Thank you for the video, same setup on my 1.5 VW Taos. This helped a lot.

@VladGeru

4 ай бұрын

Happy to help. ✌️

Good work, good channel. Liked, commented and subscribed.

@VladGeru

11 ай бұрын

Thank you very much!

Perfect tuto!

@VladGeru

8 ай бұрын

Thank you! 👍

Nice! Thank U.

@VladGeru

Жыл бұрын

You are welcome👍

Thank you …nice instructions but please help me how to disconnect the clip for the spark where i have to push with the fingers?

Thank you for video. Do you have plans to record similar one and prepare the instruction how to clean the throttle and valves? It would be useful in this engine type 😢

@VladGeru

6 ай бұрын

Thank you for your appreciation. The cleaning of the throttle and valves should be done by a professional service. I will not risk that.

Good morning, congratulations on your video! it's very informative. Tell me, what are the references of your hood struts?

@VladGeru

3 ай бұрын

Thank you for your appreciation. You will find them on ebay or alliexpress. I received them as a gift. You will also find a a video on the channel with their installation.

Thanks for your video, I'm replacing a Coil pack, but the socket is on the other side of the pack on the new one the dealer gave me, do you think it means it's wrong part?

@VladGeru

7 ай бұрын

I'm sorry mate, I don't understand. If you have the 1.5TSI, use the exact tolls presrnted in the video. Will work.

My superb is on 73,000 miles, there are known issues is it still recommended to change

Hello, thank you for the great video. I have a question about the ignition coil connectors. How do you get them off? I tried it on my car as a test, but I can't get them off. I don't want to break the plug. thank you very much. Thomas P.S. Engine Code DADA

@VladGeru

Жыл бұрын

Hello Thomas. You have a small clip on each connector. Push that clip and with force pull the connector. Don't worry, you will not break anything.

@VladGeru

Жыл бұрын

@@MrTomek1962 with pleasure!

@AJB1

8 ай бұрын

With a lot of those connectors, if you're pulling the connector whilst you try to push the little clip, the clip won't release. You have to push the plug on a bit whilst pushing the clip to release the catch, and then pull the connector whilst keeping the clip pushed down.

Sorry how to disconnect the electrical connettors ?where i have to press with fingers? Thank you again

@VladGeru

15 күн бұрын

Hello. You have a small clip on the connectors. Watch carrefuly the video. You need to push hard on that clip and at the same time pull the connector.

Thanks a lot for your vidéo, it was really helpfull 😊 I broke the push button (ring) of the crackcase breather hose because i only push on it from the top, i didn't know the correct way was to push on the button from the top and the bottom at the same time... I hope my mistake will be usefull for other people. Maybe I can replace the crackcase breather hose to have a button (ring) to fix it better.

@VladGeru

7 ай бұрын

Sad to hear that mate. Try to replace it. It is expensive?

@guyom78110

7 ай бұрын

@@VladGeru febi bilstein Ref.: 179744 around 40~50€

You put the iridium plugs in? The original were platinum by the looks of it.

@VladGeru

Ай бұрын

I've put original plugs. Code: 05E905602

Nice video...what is the original plug code pls

@VladGeru

2 ай бұрын

I used original plug in the video. Code is: 05E905602

Great , how often do you change them ?

@VladGeru

Жыл бұрын

Every 60.000km or 4 years.

Hi, thank for the video Every how many kilometers do you have to change them?

@VladGeru

Жыл бұрын

Hello! 4yrs or 60k km

@user-og2yk2ju7f

2 ай бұрын

How do I know 22 nm?

which Spark plugs do you use and the specific part number it would be very helpful for me

@VladGeru

Ай бұрын

Hello. This is the PN used in the video 05E905602

You don’t need to fully remove the breather hose you can just push it out of the way

@VladGeru

7 ай бұрын

Yes, you are right. But for me was easy like that.

Tried turning anti clockwise like the video said to get the 1st part of the air intake off, but it wont budge. Any tips?

@VladGeru

11 ай бұрын

That is the only way. Tip: do it after a medium trip(10-15km) - engine should be warm.

@deanslyfield7870

11 ай бұрын

@@VladGeru Tjanks for the fast response I'll give that a try, Thanks!

@VladGeru

11 ай бұрын

@@deanslyfield7870 let me know.

Bracket-ul acela se indoaie sau de ce necesita inlocuire ? Trebuie sa fac si eu curand operatiunea, inca ma gandesc daca sa iau OE sau NGK 95929.

@VladGeru

Жыл бұрын

Salut. Asa spune in manualul de reparatie, ca trebuie inlocuit. Am respectat fix ce scrie acolo. Eu am ales OE pana la urma, nu stiu daca merita sau nu.

Salut, bro! Ai reusit sa rezolvi problema cu pornirea la rece?

@VladGeru

Жыл бұрын

Salut. Daca vorbesti despre oscilatia turometrului la cold start sincer nu mi-am mai batut capul. Astept sa termine cold startul la fiecare pornire si imi vad de drum. 55k km fara probleme pana acum.

@MariusXMelisa

Жыл бұрын

@@VladGeru dar am vazut ca ai postat la un video legat de wastegate noise la cold start..

@VladGeru

Жыл бұрын

@@MariusXMelisa nu cred,doar legat de cold start.

Salutare , Multumim pt video-urile foarte utile ! Tocmai ce am comandat si eu bujiile, am mers pe NGK, le voi schimba zilele urmatoare si voiam sa te intre : data fiind temperatura mai scazuta de zilele astea, ai vreo recomandare in ceea ce priveste temperatura motorului in momentul schimbarii ? Ajuta ca motorul sa fie rece, sau ar fi ok sa fie cald ? Ma refer la desfiletare/infiletare, stii daca e vreo recomandare in acest sens ?

@VladGeru

7 ай бұрын

Salutare. Neaparat cu motorul cald. Te va ajuta mult.

@zed043

7 ай бұрын

@@VladGerula 5:30, ai pus ceva pe interiorul tubularei ca sa ramana bujia prinsa in tubulara ? multumesc

@VladGeru

7 ай бұрын

@@zed043 nu, am folosit tubulara speciala de bujii. Are un cauciuc pe interior care sa tina bujia. Gasesti prin magazinele de bricolaj.

@zed043

7 ай бұрын

@@VladGeru ma gandeam eu ca are ceva pe interior ca sa o tina , ms

@VladGeru

7 ай бұрын

@@zed043 cu placere si spor la treaba.

Thx 4 ur information dude ... could you share me spark plug part no???

@VladGeru

Жыл бұрын

You are welcome. Spark plug PN: 05E905602

@feloniousmonk3049

3 ай бұрын

@@VladGeru Is this a VW only part number or is there an NGK Iridium part # too? I go through the same crap on my 2022 BMW R1250 GS with NGK made BMW only proprietary part number spark plugs. It's a rip off / scam, their pricing.

@VladGeru

3 ай бұрын

@@feloniousmonk3049 I tink is only VW part number. But you can go to NGK iridium ones.

Thanks for video 👍 Do you know the part Nr. of retaining bracket (spring) which you replace?

@VladGeru

10 ай бұрын

You are welcome. This is the retaining bracket PN: 04E145853E

@Rado983

10 ай бұрын

Thank you 🍺

@VladGeru

10 ай бұрын

@@Rado983 you are welcome.

Le nom de cette bague grise qu’il faut remplacer svp ?

@VladGeru

5 ай бұрын

Video min 1:10

Think’s 😉

@VladGeru

3 ай бұрын

You are welcome!

We don’t even get an engine cover here in the states. 😂. How are the 1.5s holding up?

@VladGeru

18 күн бұрын

Hello! Mine has 67.000 km now. I am very happy with it. No oil consumption, no other issues. Very good engine from my point of view.

@naturalseven11

12 күн бұрын

​@@VladGeru Do you think 1,0 tsi is also a reliable engine? Thinking of getting second car with that motor, seat Leon

@VladGeru

12 күн бұрын

@@naturalseven11 1.0 tsi is 3 cylinders engine. For city is ok.

Hello how to find the right spark plugs ? Do you have a code or something. Thanks

@VladGeru

6 ай бұрын

Hello. For 1.5 TSI this is the part numeber for original VW spark plugs. 05E905602 You will need 4.

@Mario-if5tl

6 ай бұрын

Thank you very much, what about the ignition colt do you have it ?

@VladGeru

6 ай бұрын

@@Mario-if5tl 05E905110

@Mario-if5tl

6 ай бұрын

Thank you

@VladGeru

6 ай бұрын

@@Mario-if5tl you are welcome!

Hey, can you tell me where to buy the retaining bracket? I tried to reinstall the old one and it got broken..😂😂

@VladGeru

Жыл бұрын

Hello. That's why you need to replace it every time :)) You have the part numer in video. Try to google it or ask to your vw/audi/skoda/seat dealer.

Nie widzę powodu do poprawy kunstruktora tego elementu. Po kliku minutach pod wpływem temperatury dochodzi do rozszerzenie się materiału i nić nie " dźwięczy ". Moim zdaniem taki luz nie jest bez znaczenie.

@VladGeru

4 ай бұрын

Can you explain please? I don't understand.

Wieviel Kilometer hat deiner gelaufen?

@VladGeru

5 ай бұрын

Around 55.000 km

What is your engine code?

@VladGeru

Жыл бұрын

My engine code is DACA, but the procedure is the same for all 1.5 TSI engine codes.

@jose15pina1

Жыл бұрын

@@VladGeru mine is DADA and is the same . I broke plastic clip from vent hose and no problems , is very weak and no space but still holds in place firmly

@VladGeru

Жыл бұрын

@@jose15pina1 worst case you can replace the all hose, but if it is ok with broke clip keep it.

@jose15pina1

Жыл бұрын

@@VladGeru yes , if happens to you the plastic is weak and pressing can break but cant see any issue so far .

@VladGeru

Жыл бұрын

@@jose15pina1 that's good.

What is the part number of the retrain bracket?

@VladGeru

5 ай бұрын

You have the part number in the video at minutr 1:10.

I advice take out a small tube that contains the air from pump air. That tube its very near from the big plastic clip. In my car when I take off the plastic clip, that small tube plastic break. I have to glue the plastic and reforce with epoxy resin. Its was bad design make a plastic piece so fragil.

@VladGeru

Жыл бұрын

Thank you for the tip, mate!

@ssss-df5qz

5 ай бұрын

Ridiculous place to put it hey.

BIG Mistake ! @ 2.25, you grab the pipe connecting to the Turbo outlet and just pull and pull... this is WRONG. If you looked carefully, you will see a locking ring. Rotate this by approx 90 degrees and then the ring can be moved up. Then.. the pipe can be removed. To re-fit, move the locking ring into it's "up" position, push the cross pipe into the turbo outlet (all the way down) and then push the locking ring as far down as possible.. then HOLD then rotate 90 degrees to lock the pipe. Just pulling / pushing is brutal and incorrect

@VladGeru

Ай бұрын

Take a look at min. 1:20

@alorro93

16 күн бұрын

He didnt pull and pull, he rotate the connection and then he pulled...I dont see the problem, I did it the same way. Its just a rotation lock, no issue in that. ​@@VladGeru

@VladGeru

16 күн бұрын

@@alorro93 exactly

The 1.6 engine is better.

@VladGeru

2 ай бұрын

Diesel? Better than a petrol?

@fernarias

2 ай бұрын

@@VladGeru 1.6 on the golf/jetta/sciracco/4000 etc engine from the 70s and 80s. It was bullet proof, got high miles per gallon and it could get the same horsepower with a turbo. Changing the spark plugs was three steps and you used your hand for the first step and the last step.

@VladGeru

2 ай бұрын

@@fernarias is your opiniin and I respect that. What is wrong with using my hand in the spark plugs?

@fernarias

2 ай бұрын

@@VladGeru I'm sorry that you didn't understand my response. These new engines require too much work to just change something that should be easy like spark plugs. The old engine from vw only required that you 1. remove plug using hand, 2. remove spark plug using spark plug socket that cost $2, 3 install spark plug using spark plug socket that cost $2 (could be used on every car made at the time), 4. reattach plug using hand. I could do one spark plug in 2 minutes tops. Has nothing to do with you.

@VladGeru

2 ай бұрын

@@fernarias understood now, but from my point of view it wasn't so hard to replace the spark plugs You don't need special tools.

Bună ziua, ce cod au bujiile care le-ati folosit pentru că pentru mașina mea îmi dă două coduri (volkswagen golf sportsvan 1.5 tsi 130cv).05E905602 și 04E905602. Mulțumesc pentru răspuns și pentru postări. O zi bună

@VladGeru

2 ай бұрын

Salutare. Codul folosit de mine este: 05E905602

@mihaidaniel4400

2 ай бұрын

Mulțumesc

@VladGeru

2 ай бұрын

@@mihaidaniel4400 cu placere! Spor la treaba!