Is your Dewalt Impact Driver losing power? Try This fix kzread.info/dash/bejne/gnqCrs-CoZezhZc.html

Took me three minutes to Thank you for the tutorial

I rarely comment on videos but thank you! Blew up my tool this past week and was able to get everything back in working order with your help.

@doctorlefthandthread

11 ай бұрын

Thanks for your comment. Comments help my channel and will ensure I continue to make more helpful videos

Thank you for making this video. I somehow managed to get the ball to slip off the spring inside the chuck, which made the chuck unable to hold a bit. With this video, I was able to place the ball back where it belongs and now my impact is as good as new. Thanks again!

@doctorlefthandthread

10 ай бұрын

Thank you for your comment

Thanks so much. I had the chuck off for days now, and couldn’t for the life of me remember to get it back together correctly. I tried a few combinations but it makes sense the spring is under neath the hog ring now. I was getting ready to order a replacement spring 🤣

@doctorlefthandthread

2 ай бұрын

Glad to help

Thank you SO much! Almost brand new Dewalt XR impact that I thought was garbage. You helped me fix it! Amazing!! Thank you so much!❤

@doctorlefthandthread

8 ай бұрын

Glad I could help!

I have the dcf850 compact driver and this was very helpful even though the mechanism is slightly different. One might even say this video was “clutch”. 😂

Cheers for that, best explanation out finally got my driver sorted after everything bar the collar fell out 🤦🏻‍♂️

@doctorlefthandthread

Жыл бұрын

Thanks for your comment

Great information repaired mine now thanks to you thought it would be a hard job but you made it easy

@doctorlefthandthread

Жыл бұрын

Thank you for commenting I am glad to help

@kieranhegarty3138

Жыл бұрын

Do u have the link where I can buy the spring from I would greatly appreciate it cheers thanks.

The last ring that hold everything together is a pain. Finally i got it by lining the split section up with the releaf cut in the fixed chuck itself,and work it in around. After many attempts i had a cuppa tea then thought just line the two sections up. Once again a cuppa tea saves the day🤣

@doctorlefthandthread

Жыл бұрын

I agree ☕️

@joelhuppe3725

Жыл бұрын

Thanks. I spent an hour trying to get in it before reading your comment. Once lined up held it down with a flat head on one side then with one end of needle nose grab the ring while prying against the chuck slips right it. Also I didn't but the spring I just re made de bent in the broken one. The chuck if stuffed you have less pull to release your bit but at least it's fixed and works decent. Thanks for the good video.

@doctorlefthandthread

Жыл бұрын

@@joelhuppe3725 I am glad to help

Great job pal, saved me time and money

@doctorlefthandthread

10 ай бұрын

That's great thanks for your comment 👍

Great solution 😊

I used my Dewalt to renovated a church (three stories) and build a single story house. It finally gave up the ghost. With this video I won't be small bundle to by a new one. Thanks

@doctorlefthandthread

Жыл бұрын

Thanks for your comment

Thanks for video great help👏🏼

@doctorlefthandthread

3 ай бұрын

Thanks for the comment it keeps me encouraged to make more helpful videos

Good to know about the 885, I happened to have a dead one. Took both apart. As it turns out, the spring on my 887 was perfectly fine. So I tried swapping the collet from the 885 onto the 887 and that fixed it. Put the collet from the 885 on the dead 887, wouldn't hold a bit. Thanks for the tips!

@doctorlefthandthread

Жыл бұрын

Thanks for viewing and commenting. Check out my other videos if you have the time.

I was able to field repair mine today, I had enough spring left to give it a bend under the ball. Thanks!

@doctorlefthandthread

Жыл бұрын

Glad I could help! Thanks for the comment they all help

3 minutes or 3 years 😂 I feel ya 👍 I tried to try getting mine to allow bit to go in without having to pull sleeve but now it’s not holding at all so here I am making sure I’m not crazy 😂🤘

@WS1_AUTOS_N_STUFF

2 ай бұрын

Update . I ended up getting the order right and working but catching still but I have another one I ended up bending the current spring where broke like yours did and with some adjustments it seems to work.👍 Thanks 🤘 think I’ll still try getting a couple new springs

You are the man bro Top man1👍🏽🇳🇿

@doctorlefthandthread

Жыл бұрын

Thanks check out my other videos if you have time

Thanks i bold the pieces and now my impact driver is working good

@doctorlefthandthread

7 ай бұрын

Thanks for the comment

That did the trick. Thank you.

@doctorlefthandthread

9 ай бұрын

That's awesome thanks for your comment

If you found this video useful please subscribe to my channel

Thank you for your help. You made me laugh about the hog ring. It can take 3 minutes or 3 years. I did quick after watching your video. Cheers

@doctorlefthandthread

Жыл бұрын

Great job! Thanks

@patricklucas8008

Жыл бұрын

@@doctorlefthandthread thanks again. 👍

I repair tools as a sideline. Sometimes that split ring will slip on and off easily and other times it takes a half an hour and many choice words to get it back together. I found it just takes patience.

@doctorlefthandthread

4 ай бұрын

I totally agree

Appreciate your video. My drill is still going strong but is dropping bits. Not anymore 👍

@doctorlefthandthread

Жыл бұрын

Appreciate your comment thanks

Great camera work JA

@doctorlefthandthread

7 ай бұрын

Thanks

Muchas gracias, pude resolver el problema.

@doctorlefthandthread

Жыл бұрын

de nada siempre me gusta ayudar

Thank you!!!

@doctorlefthandthread

Жыл бұрын

You're welcome!

845 uses an extra ring (2-part ring) instead of a spring hook. the extra ring goes between the spring and the ball to push the ball up. so the spring can't break. the ball can still slip to the bottom though. that's what cause spring breaks in all of these. but in 845, you just need to push the ball up and reassemble. the fun times with hog ring are still there though. sigh.

@doctorlefthandthread

Ай бұрын

Thanks for your interesting comment I have never seen a DCF845 over here they are not common.

One thing I have learned, not all bits are the same. Name brand bits hold, they are a bit wider. However, cheap harbor freight bits etc..., do not hold in my DeWalt Impact drill chuch.

I sent my impact away for this, took 19 months to get it back and Canadian tire told me it wasn’t covered by warranty so they gave it back to me still broken 😡 I took it apart an bent the spring and it’s been working fine since!!

@michaelclark8036

11 ай бұрын

They also told me it would be $2-$3 for a new spring if I fixed it myself OR $100+ if I wanted them to replace the spring! Just give me my impact back! No parts needed and I did it in 5 minutes!! Warranty is run out cuz they had it for almost 2 years, that’s 18 months longer then I had it lmao

@doctorlefthandthread

11 ай бұрын

You have a right to be upset that is useless from Canadian tire sounds like they should retire

I have an older model Is it the same procedure?

@doctorlefthandthread

Жыл бұрын

Yes and I have a video on an older one I hope this helps kzread.info/dash/bejne/oZZl1tSqp72_mco.html

👍

Where you I order the spring from?

@doctorlefthandthread

4 ай бұрын

Ebay

Where can I find that spring?

@doctorlefthandthread

3 ай бұрын

Ebay www.ebay.co.uk/itm/204086061037?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=9b9r2bggswq&sssrc=4429486&ssuid=cjPn_ZfdQLW&var=&widget_ver=artemis&media=COPY

Where do i get the spring?

@doctorlefthandthread

10 ай бұрын

www.ebay.co.uk/itm/203673720813?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=9b9r2bggswq&sssrc=4429486&ssuid=cjPn_ZfdQLW&var=&widget_ver=artemis&media=COPY

Where can I buy this repair? Send me the link please.

@doctorlefthandthread

6 ай бұрын

www.ebay.co.uk/itm/203673720813?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=9b9r2bggswq&sssrc=4429486&ssuid=cjPn_ZfdQLW&var=&widget_ver=artemis&media=COPY

Aka the smoke show!!!!! I've smoked 4 of these.... they will run till they catch fire 🔥 seriously

@athannaelanderson3806

Жыл бұрын

Who needs a lighter

@stylez8444

Жыл бұрын

Ive had the same impact for 10 yrs never had any problem til today i need to replace the spring

@TacticalThib

Жыл бұрын

@@stylez8444 yeah 😂 it's time buddy ten years on an impact driver you got your money worth!!!!

@stylez8444

Жыл бұрын

@@TacticalThib thats a fact i actually picked another 1 up today still gonna fix this 1 tho its been a great impact I'm gonna fix it and retire it to the house

@TacticalThib

Жыл бұрын

@@stylez8444 hell yeah brother that's amazing!!!

Where can I buy the parts the little thing?

@doctorlefthandthread

Жыл бұрын

Ebay or a Dewalt supplier can get it for you

@DanielA-vw9co

Жыл бұрын

@@doctorlefthandthread thank you

@doctorlefthandthread

Жыл бұрын

@@DanielA-vw9co anytime, if I can help I will.

@DanielA-vw9co

Жыл бұрын

@@doctorlefthandthread thank you for let me know. You have a nice day

Whats the name of the string that holds the little ball?

@doctorlefthandthread

2 күн бұрын

www.ebay.co.uk/itm/203843866317?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=9b9r2bggswq&sssrc=4429486&ssuid=cjPn_ZfdQLW&var=&widget_ver=artemis&media=COPY

@Nachowindows

2 күн бұрын

@@doctorlefthandthread thank you 🙏

@doctorlefthandthread

2 күн бұрын

@@Nachowindows anytime

What’s part number

@doctorlefthandthread

Жыл бұрын

N437890

total cost of repair is £4.95 with free delivery which great.

@doctorlefthandthread

8 ай бұрын

Good to hear

nice but it would have been better if you took the tool again

99 of hundred times spring is broken,replace spring and chuck will be good as new,only using two small screwdrivers works the best

Благодарю тебя, разобрал и не мог собрать.

@doctorlefthandthread

8 ай бұрын

Glad to help 👍