You seriously make restoring my old truck way more approachable. I appreciate your videos and your wisdom!

@SweetProjectCars

6 жыл бұрын

Very welcome my friend we are here to help Have a great weekend and thank you for being an awesome subscriber

Yes, that's actually an excellent repair. One again, correct prep is the key. I've used this same technique for door & trunk weather stripping and moldings, too. It always works well. Great advice, SPC Thank you!

@SweetProjectCars

6 жыл бұрын

Hubba Bubba you’re very welcome my friend have a fantastic weekend

Hello SPC Friends and Subscribers, here we show you how to repair most any broken rubber part on your car or truck. We hope you enjoy and have a fantastic weekend :) Also, we want to update you on the teespring.com/SWEETSWAG so far because of U we have collected $20.00 in donations with us matching that, we have a total of $40 to give to the Wounded Warriors Project **Thanks so much, SPC Luvs U All***

@holidayrap

6 жыл бұрын

Wounded Warrior got a bad name a couple years ago for misappropriating funds. Lots of them. May be they got that whole thing straightened out but it tarnished their name a little....actually quite a bit.

@SweetProjectCars

6 жыл бұрын

holidayrap well we have all had our problems in life for sure and it is what you do in the problem that really matters...WWP has done much more good than bad for our vet's ..now that they have that all cleared up and all the bad apple's out, they are really moving forward in even a much larger way. :)

@holidayrap

6 жыл бұрын

Of course Mr. SPC... I have a lot of respect for you taking time to promote ANY charity. Not much can be said by others in that area. I appreciate your channel very much. Again, respect.

@SweetProjectCars

6 жыл бұрын

holidayrap thank you so very much Mike

@johndemore6402

2 жыл бұрын

Question could the black silicone be used on cracked and leaking rubber grease jackets like ball joints and such

I was about to toss mine out. I'll fix it and flip it for cheap. Brand new hose is like $175. Thanks man

@SweetProjectCars

10 күн бұрын

Our pleasure to help! Thank you for watching and commenting, have a fantastic week my friend. mad Mike & team

I wish I would have learned this years ago and maybe I wouldn't have 4 kids with 3 different moms.

@jesuiscequejesuis2267

6 жыл бұрын

lol. I'm not sure it works on ALL rubbers.

@SweetProjectCars

6 жыл бұрын

Yeah not sure what to say about that LOL have a great weekend

@wacio

4 жыл бұрын

Its much easier to stop putting your noddle in the wrong holes...

@zzindigo4222

4 жыл бұрын

Sounds like you need to get acquainted w/ a doctor👨‍⚕️ & some scissors ✂️

@uziclan8732

4 жыл бұрын

Oml

Dude, my buddy literally just tore my truck's new CV boot when i allowed him to do his first CV shaft. Priceless timing, shouldve known...laquer thinner lol

@SweetProjectCars

6 жыл бұрын

Erik timing and lac thinner is everything lol

I don't mind the jibber jabber... because during your jibbin' and jabbin'.. you make it happen cap'n.. thanks for sharing.

@SweetProjectCars

6 жыл бұрын

Thank you Norm we appreciate that we figure if we’re going to be yakin We need to be moving on with the project at the same time have a great weekend my friend

Back when I was a teenager, and I knew EVERYTHING about cars, I did this same fix on a radiator hose....what a disaster!!! LOL

@SweetProjectCars

6 жыл бұрын

Roger Corriveau I can imagine it was not good as this will not work on high-pressure tubing :)

Sweeeet tip SPC! This a another home run tip from you guys, simple, affordable easy to do whether it's two doors or four! HA! You not only give tips that work for sweet rides but so many of your tips can also translate to repairs around the home! Keep 'em coming!

@SweetProjectCars

6 жыл бұрын

Thank you Frank we truly appreciate that my great friend I hope you have a fantastic day and weekend from all of us here at Sweet project cars you are one of the good ones

@niconine268

10 ай бұрын

True that. No BS or clickbait shit on this channel. Only results bruh

Thank you. I need to repair a much smaller tube for my water dispenser. And after watching this I feel way more confident now that I can!

@SweetProjectCars

4 жыл бұрын

Dominique glad we could help you and give you some confidence that’s why were here have a great day my friend Mike Sweet project cars

Funniest thing about this video is that I watched it because I need to restore some very old seals on a vintage mining lamp. Whilst I was watching you I thought "wtf super glue and black silicone" Thats not "restoring rubber". Then I realised it would be easier just to make my own seals out of black silicone. Thank you for that!

@SweetProjectCars

4 жыл бұрын

Good deal glad we could help you out

Omg my friend you should be a magician, all the great things you do. Thanks for sharing.

@SweetProjectCars

6 жыл бұрын

Thank you cool we truly appreciate that you are one of the great ones here with us have an awesome weekend

Thank you, now I know how to repair my cracked rubber floor mat.

Super glue and rubber has the most amazing bond! A friend and I repaired two front lawn tractor tire side walls. the were tubeless! They are still holding after 2 years. we did add a little bit of slime, but the super glue is still holding the chords and outer layers of rubber dead nuts solid!

@SweetProjectCars

6 жыл бұрын

Joeak74 thats awesome thank you so much for sharing :)

@Nico-yn1vg

2 жыл бұрын

I'm glad I read this comment. I Tore the sidewall on my new car tires last night. I'm gonna prep it and superglue the flap of rubber back on it. Thanks

YES!! NO MORE SPLIT RUBBERS FOR ME! THIS IS A GREAT FIX FOR A POOR GUY! THANKS FOR THE GREAT TIP!

@SweetProjectCars

6 жыл бұрын

Yep thank you Tyler can’t have those rubber split and have a great weekend my friend

I want to thank you for this repair tip. I tumble rocks for a hobby. And I have a rubber tumbler Barrel and unfortunately the bottom started to crack. So I've taken your Technique and applied it to my rock tumbler Barrel. This is been extremely helpful

@SweetProjectCars

Жыл бұрын

Awesome! Glad we could help spiderfireentmt! Thank you for watching and sharing your results, we really appreciate it, hope you have a fantastic day my friend. mad Mike the hammer SPC

Thanks for this info! You’re awesome! I’m going make a repair kit for my side by side. Split a axle boot last year moose hunting. Tried to patch it but water and mud destroyed axle. Had to baby it out 40 miles through gnarly alaska muck in 3 wheel drive.

@SweetProjectCars

3 жыл бұрын

You're welcome my friend! Thank you for watching and sharing, we truly appreciate it. Have a great day. mad Mike the hammer SPC

I don't even own a car but i feel like for future your tips will come super handy. Subscribed and thanks

@SweetProjectCars

3 жыл бұрын

Nice!! Welcome aboard Nedas, we truly appreciate the view and comment, hope you have a fantastic weekend my friend. mad Mike the hammer SPC

I am retiring from life and moving into my Man-Cave. Only thing playing in my shop is your channel, Sinatra and Led Zeppelin.

@SweetProjectCars

6 жыл бұрын

Hey Brent that’s funny because those are two that I love to listen to myself, fly me to the moon got a love Ol’ Blue Eyes and as as Zep there’s nothing like them, have a great weekend my friend

Thanks so much Sweet Project Cars!! I repaired my little girl's mermaid fin using your tips and she's so happy to be out swimming again :)

@SweetProjectCars

3 жыл бұрын

That is awesome! Thank you so much for watching and sharing your great results Dianne, we really appreciate it. Hope you have a fantastic week. mad Mike the hammer SPC

What is 303? I am in Thailand, and no one knows what I am talking about! This is a great repair process and works like a charm!

@SweetProjectCars

2 жыл бұрын

It's this amzn.to/2WQg0sB and just a reminder, all of the products/tools we use in our videos can always be found in the SHOW MORE of the videos description, if you can't find it let us know and we will help you. Thanks for watching Dale. mad Mike the hammer SPC

I've used Loctite super glue and it really works great. Surface preparation is the key to a strong repair. Thanks for sharing!!

@SweetProjectCars

6 жыл бұрын

Danny you are correct the prep is everything thanks for sharing :)

Huge help this saved me several hundred dollars.Ordering the same intake hose from Japan would have cost close to $300..And I then treated the rubber with 303

@SweetProjectCars

2 жыл бұрын

Glad we could help! Thank you so much for watching and sharing, we truly appreciate it, have a fantastic week my friend. mad Mike the hammer SPC

Thanks, very helpful! Used this as a guide to repair a torn rubber seal on the 'vert top of my Mustang.

This video has helped me with numerous rubber parts to my bike. Great job sharing your information and video.

@SweetProjectCars

Жыл бұрын

Glad we could help Gabe! Thank you so much for watching and sharing your results, we really appreciate it, hope you have a great week my friend. mad Mike the hammer SPC

Thank you.....I did the same way and still alive after 4 years.....thank god .........👏👏👏👏👏👏👏

@SweetProjectCars

6 жыл бұрын

The aero thank you my friend we truly appreciate that thank you for sharing have a great and awesome weekend

To fix a CV boot without taking it off the car, I used a similar method, having a roofing business in England I had loads of partially cured (sticky) EPDM in strips about 3 inches wide. After really careful cleaning I bonded the boot in the same way, then put primer round the entire circumference of the boot, then applied a round of EPDM 'tape' - it lasted for years, and cost just over half an hour's work, on a Citroen which would have been a hellish job otherwise. Nice video, quick and clear - thanks.

@SweetProjectCars

3 жыл бұрын

Thank you for watching and sharing Gurgle Jug, we really appreciate it. Hope you have a great day my friend. mad Mike the hammer SPC

@BillSW

2 жыл бұрын

can u explain the primer u used?

@imtiazpatel3545

7 ай бұрын

Hi I'm in Yorkshire my air intake pipe has just split yesterday will tiger seal work on it as I've got a tube in shed will be difficult to get anything else as it's Xmas eve . Happy Xmas

Great idea. This is a great way to fix vacuum leaks on a engine!

@SweetProjectCars

6 жыл бұрын

Good beers you are exactly correct my friend have a great weekend

I like your vids before I even watch them, because I just know how good they'll be.

@SweetProjectCars

6 жыл бұрын

Ender thank you so much and we are glad we can help you :) Please share our channel any and everywhere :) Mike

I’d searched “how to glue rubber” and as soon as I saw “sweet project cars” I knew I had my answer.

@SweetProjectCars

3 жыл бұрын

Nice!! Thanks for being here with us Yebo! Have a fantastic day my friend. mad Mike the hammer SPC

Nice to see someone else using this trick! Awesome stuff. I did my CV boots just like this. 3 bucks

@BillSW

2 жыл бұрын

did the cv boot repair last?

@A-HotSauce

9 ай бұрын

How long did it hold

Great video and idea using the super glue first! I've always just used the silicone, but the super glue should make it much stronger. Thanks for sharing!

@SweetProjectCars

6 жыл бұрын

Thank you Robert and yes the superglue is the key to getting everything lined up and in place so that you can slather the silicone on LOL have a great weekend my friend

This is the best channel on KZread.

@SweetProjectCars

5 жыл бұрын

G G thank you very much for that

Thanks a lot for this video😀😀😉, I would repair my air intake hose and try this.

Just did it including CV joints ! Will try 303 after turtle ice is near empty always love your tips and advice!!

@SweetProjectCars

5 жыл бұрын

Good job Billy glad to hear that glad we can help you have a great night

@BillSW

2 жыл бұрын

how long did your cv rip repair last?

Another excellent job!

amazing .. this technique will save our pocket money instead of converting to new ones..video is best only from Sweet Project Cars..btw..you have very funny glove..millions thumbs up Sweet Project Cars

@SweetProjectCars

6 жыл бұрын

Spozz thank you so much, you are definitely one of our great Charter members :)

Thanks for the tip, I never would have thought of the loctite super glue.

@SweetProjectCars

6 жыл бұрын

You very much we are very glad we can help you have a fantastic weekend

Thank you, GREAT VIDEO!!

Thanks for sharing, happy new year

I was planing to fix my gas mask with this trick 😂😂

@SweetProjectCars

Жыл бұрын

Good idea Navarre! LOL, thanks for watching and sharing, have a great day. mad Mike the hammer SPC

Great idea. I have a project this will work great on. Thanks for sharing this.

@SweetProjectCars

6 жыл бұрын

Stranger you are very welcome my friend thank you have a great weekend

@3:15 i would sand slightly on the inside of rib with an emery board. this will give the black silcon more surface area to grab. JUST SAND the RIB NOT THE CRACKED area. Ive done this exact repair on a 98 Honda Civic CV boot and and it has lasted another 10 years !!! Again dont sand the actual crack BUT do sand the inside of the rib slightly.

@SweetProjectCars

2 жыл бұрын

Thank you for watching and sharing, we appreciate your input Troy! Have a great week my friend. mad Mike the hammer SPC

Great tip love the video and the joke and the end just loved it man 🤣

@SweetProjectCars

6 жыл бұрын

Thank you we truly appreciate that my friend

Great video as always. Thank you!

@SweetProjectCars

6 жыл бұрын

Ben thank you very much my friend we truly appreciate that have a great week

Nice! You guys could fix the world given enough time :)

@SweetProjectCars

6 жыл бұрын

Niamh thank you very much with these tips and tricks you will not believe how much your mechanical ability imagination will take off and have a great weekend my friend

YOU are the Man! 303 baby!

@SweetProjectCars

6 жыл бұрын

Thank you very much Bill we truly appreciate that my friend please share our channel everywhere you can that would really help us out.

Sweet, gonna try this on my backpack blower if my duct tape fix doesn't hold up. I took a heat gun to the tape and molded it to the contours on the flex tube. Been good for 3 years now. Redmax discontinued parts are tough to find and expensive.

@SweetProjectCars

6 жыл бұрын

I’m with you the older backpack blowers are getting harder and harder to find parts for but this works great have a fantastic weekend

@cck77is

4 жыл бұрын

Just finished my Husqvarna blower flex tube repair using this method, and although I don't have a SPC super duper air compressor nozzle. I made due just fine and dandy! You guys rock! Thank you and keep'em coming... 👍😀👍

With all the comedians out of work, you’re cracking off jokes like that?!? 😂 But I like what you are showing so I’ll be back again for more.

@SweetProjectCars

6 жыл бұрын

Thank you Harry for being here with us have a fantastic weekend

This happened to my moms van and I use JB weld plastic weld putty and it works really good

@SweetProjectCars

3 жыл бұрын

You can use whatever you want, we are just sharing with our great subscribers what has given us proven results after 40 years of experience. Thanks. Have a great day. mad Mike the hammer SPC

That will save a lot of money thanks my friend

@SweetProjectCars

6 жыл бұрын

Thank you very much we truly appreciate that Deejay have a fantastic weekend

You sure have some cool ideas thanks amigo

@SweetProjectCars

6 жыл бұрын

Ty thank you very much my friend and again Gracias

Brilliant tip thanks guys

@SweetProjectCars

6 жыл бұрын

Thank you Martin we truly appreciate that my friend have a stupendous weekend

As you said, “clean the surfaces to make sure the adhesives will adhere.” Make sure you have vigorous ventilation when using volatile solvents like lacquer thinner. After cleaning the surfaces with lacquer thinner or alcohol, air dry, then test to see how clean the surfaces are by spraying clean water on the surfaces to be repaired. If it is free of grease, the water should sheet in the surfaces. If the water beads up anyplace, you will thank yourself for checking because the adhesive would have failed. Conditioning the part before repairing is optimal. Treat the rubber with wintergreen oil in a carrier solvent like alcohol 1 to 3 dilution. Always use gloves, don’t touch the part with bare hands.

@SweetProjectCars

5 жыл бұрын

Paul Menten you are a great Subscriber thanks for sharing :)

@shakirahmedtth

4 жыл бұрын

I wonder how we can do this on the front axle CV shaft. my axle shaft boot is broken and leaking and it is full of grease. we can still do this work on that torn rubber boot on the axle?

@gogators5762

2 жыл бұрын

@@shakirahmedtth did u ever try this im in the same boat with my axel boot

A great little fix, thanks. 👍👍👍 the jokes are always welcome too 😜👍

@SweetProjectCars

6 жыл бұрын

Thank you train driver we appreciate that we try to keep it lighthearted here that’s for sure have a great weekend my friend

Mahalo for the tip. Good video. I restored a vintage VW Scirocco undercarriage shift boot with your method. However, unlike the air plenum you've repaired, the shift book will be under constant movement like a CV joint boot. I have a feeling, it will peel apart over time. We'll see. I made a video that I'll edit and post sometime. I noticed that after I got it togther, used black silicone, started to flex the boot, the super glue bond cracked. I could see the silicone also peel away from the rubber of the boot. So for some extra bonding, I sprayed a couple coats of Flex Seal inside and out. It turns out that Flex Seal doesn't bond well with rubber and can peel away with ease.

@SweetProjectCars

2 жыл бұрын

Thank you for watching and sharing Darryl, we really appreciate it, hope you have a stupendous day my friend. mad Mike the hammer SPC

@HealthFitnessMartialArtsDEng

2 жыл бұрын

😊 You too!

Nice tip! 😃👍🏻👍🏻

@SweetProjectCars

6 жыл бұрын

You very much my good friend that is much appreciated have an awesome weekend

Worked for me on my Yamaha yz85 reed intake boot 👍

@SweetProjectCars

4 жыл бұрын

Well done!

dont forget to try the 3M 5200 BLACK adhesive. i used this for the exterior of a hose.

@SweetProjectCars

6 жыл бұрын

ATL we sure will my friend thank you so much for sharing this have a great weekend thank you for being an awesome subscriber

Another great trick! Thank you ever so much for that!! Love the chicken coupe joke! That was great also!!

@SweetProjectCars

6 жыл бұрын

Thank you MICHAEL we appreciate that yeah we like to keep it a little light sometimes with a couple of crazy jokes have a fantastic weekend my friend

GOOD LORD AND I JUST REPLACED THE INTAKE HOSE ON MY GIRLFRIEND'S HONDA LAST SATURDAY SINCE I COULDN'T THINK OF A WAY TO FIX IT! I SPENT $32 ON IT! (I wanted to use JB weld but I've never used jb weld so I didn't know how good it would be in runner2)

@SweetProjectCars

6 жыл бұрын

Well now my friend you know how to deal with this issue in the future that’s why her channel is here to load your memory banks up with all kinds of cool and trick ways to fix things affordably have a great weekend

This method alot better thanks bud 👍🏽

@SweetProjectCars

5 ай бұрын

Glad to help Shawn! Thank you for watching and sharing, have a sweeeeeet day my friend. mad Mike & team

Nice video. 303 RULES 🤘🏼

@SweetProjectCars

6 жыл бұрын

Thank you very much my friend we truly appreciate that have a great weekend

Hi, Every day I look forward to a new Sweeeeet tip. I don't think that's sad! So stone chips on Saturday, and they will be gone ! Plus I don't think I will be unable to resist to crawl under car and 303 sauce the CV boots. 😁

@SweetProjectCars

6 жыл бұрын

Colin good to hear that my friend you are one of the good ones here that’s for sure we are glad we can help you and those CV boots will not crack or Rot if you keep the 303 on them have a great weekend my friend

@colinuk4509

6 жыл бұрын

I like to joke a bit, but I've learnt so much from your posts that I've started to use. Bought the superglue today just in case! Just asked a question on one of your stone chip videos, hope you don't mind. C

Hey, thanks for listing the gloves you use.

@SweetProjectCars

6 жыл бұрын

Call you’re very welcome my friend we always try to keep all the tools in the show more of the video description have a great weekend

Nice.thank you.👍🏆😯

Cool. Personally, I'd let the superglue dry for 12 hours. RTV for 24 to 48 hours.

Thanks for sharing your experience. That is perfect. A query that I have - will the glues be hot and UV resistant?

@SweetProjectCars

6 жыл бұрын

The glue we show in the show more of the video description is not a hot glue it will withstand high temperatures very well and it is a UV silicone glue is well

Thanks for the vid. I do want to ask about the 303. You mentioned the intake hose would be covered with 303. -Should we be careful not to get 303 on the repair/dried silicone? -Or is it something that's fine to go ahead & submerge/soak/cover in 303? -Should it only be sprayed away from or around the repair? Thanks again

@SweetProjectCars

3 жыл бұрын

Once the repair is cured up, you are good to douse the thing in 303 until the cows come home. Thanks for asking Donnie. Have a great day my friend. mad Mike the hammer SPC

@blackterminal

2 жыл бұрын

What is 303?

@alberoDiSpazio

Жыл бұрын

Is 303 a product one can purchase? Or is it a homemade "secret sauce"?

Top dog once again. Thankyou Mike

@SweetProjectCars

10 ай бұрын

Thanks man! We really appreciate the view and comment, have a great rest of your week. mad Mike & team

That’s creative bro good idea

@SweetProjectCars

2 жыл бұрын

Thank you very much, Jose, glad to help! Thanks for watching and sharing, hope you have a fantastic week my friend. mad Mike the hammer SPC

1000th Thumbs Up. Great vid!

@SweetProjectCars

4 жыл бұрын

Thank you very much my friend we appreciate that

Thank you Ron Desantis

@SweetProjectCars

Жыл бұрын

Agree!! Thanks for watching and commenting Michael, hope you have a great day. mad Mike

You are so excellent!

@SweetProjectCars

Жыл бұрын

Glad to help! Thank you for the view and kind comment, have a great day my friend. mad Mike the hammer SPC

His gloves r so funny! 😄

@SweetProjectCars

Жыл бұрын

LOL, just trying to have fun Droop! Thanks for watching and commenting, hope you have a great week. mad Mike the hammer SPC

Any time my friend.....have a good weekend..............😂😂😂😂😂😂😂😂

Two words: You rock.

@SweetProjectCars

6 жыл бұрын

9mm thank you very much my friend that means a lot to us for all the time and effort it takes to do these videos have a fantastic weekend

@dredger9mm

6 жыл бұрын

Well we all appreciate all your effort and personally I'm always lookin' forward to the next video. Honestly, I ought to get off my ass, and put all this knowledge into action and offer up a little side business here in town. Anyway, thanks again, man. Humongous thumbs up from me.

@SweetProjectCars

6 жыл бұрын

dredger9mm you are very welcome my friend ..and yes you could start slow and easy and make some great extra money on the side ...you never know where it could go :)

Love your vids! btw, are you Al Franken? : )

@SweetProjectCars

6 жыл бұрын

wjsj69 thank you and yes I am :)

Will this work on rubber duckies ? Lol great video brother.

@SweetProjectCars

6 жыл бұрын

LOL I’m sure it would work in rubber ducky’s and have a great weekend my friend

@MrV2u

6 жыл бұрын

Sweet Project Cars the same to you my brother.

“Swwweeeeeet project cars here” you’re the best. Thank you sir.

@SweetProjectCars

3 жыл бұрын

You are very welcome, thank you for watching and commenting, we truly appreciate it. Have a fantastic day my friend. mad Mike the hammer SPC

Gonna try this with my converse shoes:) thanks

@SweetProjectCars

3 жыл бұрын

Thank you for sharing :) Have a great day. mad Mike the hammer SPC

Hey HEY!.. hats off to ya as usual.. great work and share as well.. quick question I have semi soft some sort of foam based smooth rubber like finished arm rest/door handle on a Peterbilt that of course has degraded greatly over the years and now had the metal handle base breaking thru.. any videos on that type of repair/fix?.. wish I could supply a photo.. ok then.. enjoy that Fla. weather!

@SweetProjectCars

2 жыл бұрын

Hey Stephen, sorry about the delay in responding, if you can send us pics of your door handle to sweetprojectcars@gmail.com, we will see what we can do for you my friend. Thanks for watching and asking, have a great day. mad Mike the hammer SPC

fook i love your channel

@SweetProjectCars

6 жыл бұрын

Thank you very much that means a lot to us for all the time and effort it takes to do these videos it feels good to be appreciated have a great weekend

Great! Do u think this will work on shoes (Nike)? Particularly bonding the sole to the shoe?

@SweetProjectCars

5 жыл бұрын

give it a shot and see if you like the results

1:33 bro is edging the super glue

@SweetProjectCars

5 ай бұрын

That’s correct glue the crack first then silicone it

Thank u thank u just repaired a vacuum hose perfect Have u every try using Bio cleaner I used it to clean glass Has a clay from France wonder if could be used for car paint to clean before buffing?

@SweetProjectCars

6 жыл бұрын

You’re very welcome and thank you for sharing some great tips and ideas have a great weekend my friend

So good!

@SweetProjectCars

2 жыл бұрын

Glad you liked it Sharon, thank you for watching, have a fantastic day. mad Mike the hammer SPC

I have 2 dry rotted spots on a rear vented window seal on my 98 Ford Ranger XLT I'm restoring because I love this truck. Been together a long time. Will the permanent fill in the 2 little voids until I can find a new seal I can't seem to find anywhere?

@SweetProjectCars

2 жыл бұрын

This amzn.to/2ug9uNA is what you want to use for that per the video Robert. Thank you so much for watching and asking, have a great weekend and all the best on your project my friend. mad Mike the hammer SPC

I’m speechless literally

@SweetProjectCars

2 жыл бұрын

Thank you for watching and sharing, have a great week my friend. mad Mike the hammer SPC

Hello SPC , this is a great and informative video. Btw, do you have any tutorials video or tips on car interior sound proof

@SweetProjectCars

5 жыл бұрын

iqraq we use this amzn.to/2J2R1fM and the problem is you pretty much just remove all of the interior to install it. It is a simple process but very time consuming

@iqraqkamalrudin8135

5 жыл бұрын

@@SweetProjectCars thank you for the information

Thanks 👍

@SweetProjectCars

6 ай бұрын

Our pleasure! Thank you for the view and comment, we really appreciate it, hope you have a great day. mad Mike & team

I wonder if this would work for my snorkel I use for swimming? It's black silicone but it's exposed to salt water on a regular basis

Fantastic

@SweetProjectCars

6 жыл бұрын

Thank you Mick we truly appreciate that have a fantastic weekend

Hello SPC! I have a question for you but it is regarding stone chips repairing. I used your guide for that. And I satisfied around 80% ) The issue is when I was sanding the primer in some spots I destroyed a bit more than I should clear coat. I didn't find any videos from you on how to repair the clear coat )))

@SweetProjectCars

6 жыл бұрын

Kyryll Haponenko the only way to repair clear coat is to buff it back to a shine with your mother's polish or if you took the clear off you will need to reclear it see this it may help kzread.info/dash/bejne/Yp-KtNmngqzIZZc.html

Gonna try this on a split Mercruiser throttle cable boot. May save $600!!

@SweetProjectCars

2 жыл бұрын

Glad we could help Diane! Thank you for watching and sharing, have a great week and all the best on your project my friend. mad Mike the hammer SPC

my broken aftermarket airfilter for my trucks short ram...the blue mesh has disconnected from its metal base. what type of glue should i use to reconnect it or is there a better way? thx

@SweetProjectCars

Жыл бұрын

Please send us good quality pictures of your airfilter to sweetprojectcars@gmail.com so we can get you pointed in the right direction. Thanks for watching, have a great week my friend. mad Mike the hammer SPC

would this work on an intake rubber boot where gasoline would be passing through the boot and very close to the high temps of the engine?

@SweetProjectCars

3 жыл бұрын

Give it a shot, we've had great results when using this process on the many things we have used it on. Thanks. Have a great day. mad Mike the hammer SPC

Is that black stuff RTV gasket sealant? Im in New Zealand I think we call it something different. On my JDM Honda the intake rubber hose is broken like that and a new one is very expensive.

@SweetProjectCars

11 ай бұрын

Watch this kzread.info/dash/bejne/l2l72K6ndsqpkco.html it should be exactly what you are looking for my friend. Thanks for the view, have a great day. mad Mike

im repairing my own right now

@SweetProjectCars

11 ай бұрын

Glad we could help Stella! Thank you for watching and sharing, have a great week and all the best on your project my friend. mad Mike

I’m going to do this but shorten the tube (cut it in half) on my go kart build because the air box and tube sticks out about a foot out and doesn’t look good that far out. Where do you recommend I cut between the ribs??

@SweetProjectCars

3 жыл бұрын

You cut in the valley of the ribbed tube. Thanks for asking, hope this helps. Happy New Year. mad Mike the hammer SPC