Thank you. I followed the same cleaning steps and the idea worked. You are following from Dubai

Just ordered a small box of replacement pads from Amazon - thanks for the tip!

@treadmillrepair754

3 ай бұрын

Me too

I just repaired mine using superglue and kitchen foil. It did the trick.

Tha k you for this pointer.. In the past I have used the metal disks (used inside the simple pcb mounted switches) and glued on the pcb itself as a fix. I didn't know you can buy the conductive patches.

Thanks. I didn't even know that you can buy those pads. I was planning to implement 3d printed button and put something conductive below it. But this would be much better solution. Thanks, I'll buy these when next encounter worn remote.

@UmarFarooq-yz8bb

9 ай бұрын

Mine is also having this problem. If you have found any solution please let me know. Thanks

Well done! that was a little surgery :) Is a much better solution than buying any weird universal remote

@treadmillrepair754

3 ай бұрын

I fix High End Audio, most of the times remotes cost over Us$400 dollars. Costumers pay Us$100 dollars or more for fix it with a big smile.

Professional technitian.👍

@TinC33

2 жыл бұрын

Faaar from that but thanks anyway.

I use tin foil on my remotes, it works just as well. If your fixing lots of remotes then your method makes sense, but for a one off tin foil is the way to go 🙂

@TinC33

11 ай бұрын

Great, i didn't try that, thanks for info,

@WillPOnya

6 ай бұрын

What kind of glue works best?

@trooperwolfie

6 ай бұрын

@@WillPOnya rubber cyanoacrylate, or black super glue is best, but any super glue will do 👍🏻

@WillPOnya

6 ай бұрын

@@trooperwolfie - thank you. I really can't imagine any glue sticking to silicone due to the oil. I have to clean the circuit board once or twice a week on my remote. Alcohol just won't last so i use a pencil eraser to remove all the black stuff from the switches. And an emery board to clean the black stuff off the eraser for the next cleaning.

@WillPOnya

6 ай бұрын

@@trooperwolfie - thank you. I really can't imagine any glue sticking to silicone due to the oil. I have to clean the circuit board once or twice a week on my remote. Alcohol just won't last so i use a pencil eraser to remove all the black stuff from the switches. And an emery board to clean the black stuff off the eraser for the next cleaning.

Thanks, well explained thorough video. Is that cyanoacrylate glue (superglue) ?

❤ very nice information

Thank you. I think I will use a pencil to draw a circle on a bits of paper, then paste it to the button pads, as your method.

Very nice! I have a keypad with two buttons not working but the track/trace/pad on the PCB seems to conduct badly. The track/trace/pad on the PCB it's color is lighter than the other working ones. Is there a way to fix it?

very good info, TY if i can fix my button issue i can save about 1600$ :)

Good news

can you use other conductive material, like conductive metal tape? or does it have to be conductive rubber pads?

@trooperwolfie

11 ай бұрын

I use tin foil (video on my channel 😉) it works just as well.

@sdgarmon

5 ай бұрын

Use an old unused remote controller as spare pads. Mine worked without problems :)

where did you bought the pad? last week Im repairing my failed car climate console button and couldnt find the replacement ended up gluing aluminium foil on the pad dont know how long it will last

@TinC33

2 жыл бұрын

There is a link to ebay under the video, search ebay for button pad kit

@kernelist1

2 жыл бұрын

@@TinC33 thanks mate

Hello, can you please confirm the type of glue that you used. Thank you.

@TinC33

Жыл бұрын

It is ca, cianokol glue, super glue, one second glue...

Question for you, in this example, is it likly that when trying to use the remote none of the buttons work? Or would it be just the one button causing problem? My remote (the same as in video) has just stopped working.

@TinC33

Жыл бұрын

If non button don't work then i start checking for power issue, check and clean the contacts on battery, try to measure if you got any voltage on pcb... If some button not working it's a button problem, but surly not if noone doesn't work.

@mywateva

Жыл бұрын

@TinC33 OK Tin thanks for the response 👍

@gordonemery6949

Жыл бұрын

@@mywateva mine broke no buttons worked,so tested the ir led and it was broke ,put new one in and guess what ? It worked 👍

@AiseStyle

Жыл бұрын

@@gordonemery6949 I did the same and guess what? It still doesn't work... :( The led was broken and the new one now works (tested with multimeter), but the remote still doesn't activate it. There must be something else wrong. Power supply also makes it through into the board, tested it. I tried button pads from another remote, no luck either. The pads from the broken one work on another remote though.

que pegamento usas para esa silicona?

@isidoromaich7226

2 жыл бұрын

El usó Loctite super attak, pero puedes usar cualquier cianoacrilato.

I have no meeter, l repair my remot successfuly bt voice+ button not worked solve my problem plz

Instead of buying new button can you take out one of the less used buttons and replace the worn button with the less used ? Gonna try it that way.

@TinC33

21 күн бұрын

Sure it should work perfectly, i didn't want to demage working buttons but its a great idea because there are just no way for some bittons to be used anytime 😀

@jackiehill3016

10 күн бұрын

How do I stop my tv from saying change batteries when I just put in new batteries

what kind of glue did you use ? i heard C A glue ... is that right ?

@TinC33

3 ай бұрын

Yes but rubber glue is better, in any case Sand a bit surface before

you ready to be a surgeon. or a rocket specialist. or repair the positron brain of a robot.

How can I contact you?

@TinC33

2 жыл бұрын

You can tell me here

I didn't work