Awesome video! Thank you so much for all your awesome e93 repair videos. Very helpful.

@Makhnovets

2 жыл бұрын

Nice to hear!👍🏻

Thank you so much for making this video! Mine just broke and I will do exactly what you did!

My god!! Finally a video on this thank you

@Makhnovets

2 жыл бұрын

Hope you enjoyed it!

Can you show how to actually install the repaired fairing back onto the springs and clips? Thanks! I appreciate your video.

@Makhnovets

Жыл бұрын

unfortunately car is sold. for the spring, it's non removable part, you can replace the whole piece, for the clips, I think you can manage that, it's easy enough to figerout. good luck!

Really appreciate this vid

@Makhnovets

2 жыл бұрын

My Pleasure!

Great vid!

@Makhnovets

2 жыл бұрын

Thank you!

Keep up! Really helpful!

@Makhnovets

2 жыл бұрын

Thank you! I will try!!

@rosybosquetfamily2515

2 жыл бұрын

@@Makhnovets where can I buy this piece I have the same issue with my hardtop

I fixed mine by scraping off the remaining bits of the original mounting tabs on the bottom of the cover, then using epoxy to glue on small plastic picture hooks facing outward from each of the two pins on the hinge that have the original torsion springs. I then used 7/16" x 1" tension springs between the pins on the hinge and the hooks in a V shape from each pin. This solution does the same thing as the original overly complex design, and it cost me $12 including epoxy and springs. It holds the cover to the spring, but allows it to move away slightly when the hinge goes down into the channel in the roof, and holds the cover in alignment with the channel. The whole job took under an hour (plus 24 hours for the epoxy to dry).

@jackfleming5677

Жыл бұрын

Hi do you have any pics of how you did it please?

Feel like it’s a due time to have those trim broken. Mine just felt of 1 week ago. Your video come out just right time. I don’t know why this part is soooo expensive

@Makhnovets

2 жыл бұрын

OEM piece is no longer available because of factory stop production back in 2014 or 15. Some people use 3D printers for those parts.

I looked everywhere and glad to how found your video. I have the 2008 E93 (Same color as yours). a piece of the track that you use the bracket to clip into broke off I am trying to use Loctite to glue a new OEM bracket to it. Once glued I'll have to slip the metal spring into it and then reattach the other spring end to the functional bracket and clip. Hoping it works... if not, I may need to take the whole trim piece off and use plastic weld and shape it to fit all clip in. Great vid though!

@Makhnovets

2 жыл бұрын

Thank you! Hopefully it Will work!!

@Makhnovets

2 жыл бұрын

Other solution is 3-D printing.

Question - Those springs -- what do they do-- seems my springs have come out and are scratching the roof. where do they go and how Can I put them back? Thanks so much

Thank goodness for you and your videos. Any chance you have (or can link) me to instructions to remove the middle trim piece? I'm paranoid I'll break even more parts trying to take it off. I unclip the remaining (unbroken clips) but I don't know how to slide the spring out of them (or if you're even supposed to do it like that) so that it releases the actual plastic molding piece.

@Makhnovets

2 жыл бұрын

The black plastic plugs with clip in the middle you have to remove them to be able remove the plastic and relish the spring. When i was removing my, i did break more of those foots that I glued back, so good luck with that, the piece extremely fragile.

@ChristopherLam1030

2 жыл бұрын

@@Makhnovets Thanks a bunch as always!

Hi Thank you for the video. the middle plastic trim (right Side) has broken today but i couldn't fix it the way you did it. it is very difficult to find the broken piece alone as BMW sell the set of 6 pieces all together and very expensive which is non sense. I am still looking for one everywhere online/offline. BTW my car is 4 series convertible

@Makhnovets

2 жыл бұрын

I know, the guy who can 3d print some parts, I recently met him in the comments, ill send you a link, so you can talk to him, after all, do your own research on 3D printing! it worth a shot! (steven@stevenrogersfineart.com) - text him, tell him that you find him on my channel! (But he needs a dimensions for the part, do your reserch. )

@lionheart8083

2 жыл бұрын

@@Makhnovets thank you so much ❤

Great video. I have a broken spring. Do you know where I can find a replacement..any links would be helpful

@Makhnovets

Жыл бұрын

Thanks for the comment, but only halp that can provide is www.realoem.com/bmw/enUS/showparts?id=WL73-USA---E93-BMW-335i&diagId=54_0364, an go to junk yard and look for e93 body, even though they are rare, you still have a chance to find the part. good luck!

Hi ,interesting video,my rear liner fall off,what kind of glue should I use to put it back?

@Makhnovets

2 жыл бұрын

3M Headliner & Fabric Adhesive, 38808 i did use that one, for simple job it work just fine, but for more tricky liner it's not always the best choice, you have to follow the direction step-by-step to get the best resaults!

Thanks for the video! What are thoughts on purchasing these trim covers off ali express? It’s too expensive getting it from bmw themselves. did you have experience with the springs being uncoiled? If so how to recoil them. And finally how would you paint these trim covers to match car colour?

@Makhnovets

Жыл бұрын

If you can find it on aliexpres then do it. not sure about dealer, I only been to one bmw dealership, and they couldn't order it. Out of Stock. Recoil springs... I seen one person drilling out rivet and getting there a custom rivet. it's something similar: welderseries.com/store/Threaded-Tube-5-8-OD-x-2-Long-3-8-16-p51163075 Otherwise the whole arm have to be replaced. for paint, every car have paint code, check online how to locate it, or go here: www.mdecoder.com/ type the vin, and it will show you the paint code. You can get paint from CarQuest, they will mix it and can put it in the spray can. or it's a small piece, so if you have no experience in painting, just take it to the shop, along with paint code, it probably be like $100. Good luck!

@anthonyhoang9715

Жыл бұрын

@@Makhnovets Thank you so much!

Always be smarter than the job 💪

@Makhnovets

Жыл бұрын

That’s interesting way of saying it))) also, I’m not sure if it’s a compliment or you making fun of me)) In any case thank you for the comment!

So the rear trim peace just attached back to the roof? No glue or 3m needed? That's the only broken part on mines I don't want to take it off just yet.

@Makhnovets

2 жыл бұрын

Yes, the very last piece of that plastic trim is just on clamps, should be simply lifted, also in my case looks like the gasket around was melted and that's why i used the blade to remove it, or previous owner just used some glue to pop it back, either way it's extremely fragile, so be careful and good luck!

Need info on replacing the springs on the roof. The plastic piece is in tack, but the clamp is broken and the spring is over extended.

@Makhnovets

Жыл бұрын

Try to bend the spring back, otherwise you’ll need to replace the whole arm.

Sorry to comment on so many of your videos but I'm wondering what the area underneath the plastic trim is called with the springs? on my e93 m3 the springs on one side are all screwed up and even damaged the paint. I just want to search for the part but struggling with that.

@Makhnovets

Жыл бұрын

Yeah, I had exactly same problem, I’m more then sure you can’t buy those springs separately, I’ll look it up tomorrow for the specific name, but in short the whole arm is and assembly. So that’s makes this part so annoying.

@smokey.m3

Жыл бұрын

@@Makhnovets Yeah man talked to a few shops and what I’m understanding is they’re sold in sets which is interesting. Either way I really appreciate your response/thoughts. Your M3 is super clean - enjoy the road my friend!!

@Makhnovets

Жыл бұрын

It's not specified, but that's pretty detailed diagram: www.realoem.com/bmw/enUS/showparts?id=WL73-USA---E93-BMW-335i&diagId=54_0364 One more. www.realoem.com/bmw/enUS/partgrp?id=WL73-USA---E93-BMW-335i&mg=54

@smokey.m3

Жыл бұрын

@@Makhnovets I found a dismantler that has the part for a fraction of the cost thank god and don’t need to buy a set either - any idea the amount of labor it takes to replace that part?

Hey! I have this exact problem with my car, but a little while ago I removed the spring that holds the bracket & the plastic strip together because if squeaked when I drove. Do you know the part number for the spring by any chance?

@Makhnovets

2 жыл бұрын

Go to www.realoem.com/ you will find diagrams there for particular car! Best web if you own BMW!

@hollyseymour1149

2 жыл бұрын

@@Makhnovets thank you so much!!

@sfotouhi1

Жыл бұрын

@@hollyseymour1149 Curious...were you able to find the spring? Thank you

@oo88slatt

9 ай бұрын

@@hollyseymour1149do you know pls answer

@Makhnovets

9 ай бұрын

The answer for this question is that you can not replace the spring itself, unless you make it custom, the other solution is to replace the arm.

Why do these parts break? Lack of lubrication?

@Makhnovets

11 ай бұрын

The plastic is pretty vulnerable to UV and aging, as for the treatment, not sure… fragile plastic is a problem. As what to do with it, it would be nice if someone could 3d print it.

The part's in the descrition if you want to buy them.

I have tapped a small screw in each of the brackets so they never pop out again 😂

@Makhnovets

2 ай бұрын

lol, I think I'v seen this before)))

Is it safe to drop the top with one trim broken ? The long one to be exact. I’ve ordered my parts but couldn’t wait to open the roof 😭

@Makhnovets

2 жыл бұрын

It's kind of safe. I had a couple of scratches from the spring that was holding the plastic trim, you can use electric tape to fix it to the frame, but besides that, you should be fine, except for the portion with cut-out for that little moving piece, just be careful with it as well! The trim is only for protecting the hinges or moving parts from the dust and rain.

@kokulanrajendran

2 жыл бұрын

@@Makhnovets thank you sir 🙏🏽

Bro you didnt even show the clips and the springs going together! Thats the most important part!

@Makhnovets

3 ай бұрын

My bad

If you want to see how the trim plastic cover is removed easily, check it out here: kzread.info/dash/bejne/doCLlqqxk7C3eLw.html

@Makhnovets

Жыл бұрын

Thanks. Good Vid!

I mean pretty useless video, you show me just about everything except how to install it 😂😂

@Makhnovets

Жыл бұрын

Sorry, but that's the content that I have, in general, I explain how it works. I'll be making the E93 Video once again in the future, and will add your comment as a reference... Basically, I will get all the negative comments about e93 Roof and cover all topics in one video, such as of how to install the roof trim, how. to readjust the roof, roof stuck open, and more. Sorry that this video wasn't helpful. But I appreciate the comment, in that case, I can add this to my future Video!