I love these TL/CL Type S wheels! I really need to sand & repaint mine, too. Great job! Those wheels look new!

Pretty good! ... gave me confidence to do my wheels thanks 👍👍

Saved to my favorites, due to inflation i won't be replacing my crappy corroded looking factory wheels on my 2006 Silverado after all. I'm gonna do them exactly like you did in this video when the spring weather arrives. Thanks !!!

I personally liked the the 2nd one but it could be because I made them lol. As for the music i put whatever royalty free music I could without getting you a copyright so feel free to change that music up but the 1st and 2nd one are the best ones in my opinion. Thanks for the shout out man i appreciate it and them wheels turned out great! Keep up the great work man.

Looks great! If you want more sheen add a top coat of clear. I’d put a wider tire on the rims to protect them.

If you were put a coat of clear on there they would came out a little shinier and will protect that metallic coat on there

I am doing actually old 2009 passât mags for my Golf sportwagen 2017 and all this love for winter mags! Heading back to the shed with my porter cable rotary sanding machine!

Nice job im learning alot from your channel.thanks

If you add the clewr coat on top it cuts down on the metallic finish bigtime. Turns them to almost a gloss grey

Trying this on my Si’s, I’ll be making a video of it. Let’s see how it goes. Thanks for the coaching!

Excellent work! Very clean and looks stock.

Great man!!!!! I'm soooo gonna do my rims myself

I subscribed just because of the way you said “peeeace”!! Wheels look great!

@DNALI

3 жыл бұрын

Welcome to the channel

For intros, definitely the first one 👌

I found that Rust-Oleum 2X at Walmart in the Spring of 2015. Bought it to save money. (2 cans in one) I remember still buying too many cans. Anyway, I too was amazed how great the original rims on my 1988 Nissan Sentra turned out. Now I am about to do aluminum rims on 2008 Quest. Guess I'll do it the same way I did before. Wish I knew if you only used one can of primer and one l can of paint. I won't return extra cans and its No fun running out of paint. Especially with the wheels off the car. Ciao

You did a great job but I was surprised that you didn't finish them off with a couple coats of clear.

@luisbravo495

Жыл бұрын

You are right, and thanks for reminding 👍👍👍 because i want to do that

Nice work Holmes!

the first intro is the best imo

I like the oem look when the sun and light hit .these are flat non shiny.

I literally have the same issue with the same wheels my damn 07 accord. Thankfully, I’ve found this video!

Badass video...I'm subscribing!

Great info for sure. Thanks.

The first one looks nice

Beautiful job

I'm gonna paint an aluminum mountain bike frame and wondered if rustoleum's 2x primer would work. Thanks for the demo.

hello from Alberta looks good well done , my 2005 blazer 2door 4x4 will look good I'm on it, thanks bro .

I used this same can on 92 bmw rims 2 years ago came out dope I regret not adding Clear Coat 💯 great video

i got the same spray paint so thanks for the video

Both intros are awsome

im curious as to how it will hold up and will car wash rim cleaners eat it up. Maybe hit it with k2 clear coat after paint for durable protection. they look really good.

Good job bro💯💯... What's the name of the spray that i need?? I plan on doing this to my audi..

Great video, thanks

I say the second one for sure 🔥

Not glossy enough you said, well you really should use a clear coat. Helps protect way way better. Plus you will get the gloss look u wanted. Thanks

@martinortiz3186

3 жыл бұрын

What can a clear coat do you recommend...thanks bro..

Looks brand new

Can you list the primer and paint used? Saw it in the video. Want to be sure I get the exact product. How has the job held up?

Wow, what a difference. Do you have an update how they held up? Thanks for sharing your video.

@DNALI

2 жыл бұрын

I sold this car a few years ago with these wheels but have done the same repair on pretty much every set of wheels I own and they hold up really well.

Wow great job

wow unbelievable dude.

Good job thanks man

Looks good!

How would this hold up to having tires changed or having a flat repaired?

Can you do a video showing how you safely removed all four tires? Thanks.

Looks good, should the primer be sanded down tho?

those look brand new man

Very good job Nice

I have F150 alloy wheels with paint coming off. It is showing the black rim I assume. Do you think this technique would work with mine?

Thanks man 🙌

First intro with different music or like someone else said g35 revs

How do you get the overspray off the tires?

Great vid. Did I notice in the music a sampling of the description from sweet project cars?

Good job 👌

My 3.2 cl is having transmission issues the torque converter isn’t locking up like it’s supposed to sometimes 😢

AWESOME JOB 😳 I REALLY NEED MY CAROODED RIMS DIY JOB 🤔🙄

@bibibou3708

4 жыл бұрын

m.kzread.info/dash/bejne/on91rdp6eMLFn6w.html

Not bad at ALL! 👍

Look great!

Mannnnn good 👍🏽 idea of the cards🤪🤪

Man those rims turned out amazing nice job

@DNALI

5 жыл бұрын

Riel_ Gaming thanks man. Much better than they were haha

does anyone do this in the new york coty area? let me know want mines done , same exact rims for an explorer

Outstanding

nice man!!!!!!.

I thought they looked awesome after full sanding! Could you just sand them and then add clear coat and be done? I’m not too keen to spray paint my rims 🤔

How’s the paint holding up?

I need a deck if cards first thing lol....good trick

How long will this last in Canadian weather and salt

how many cans ( primer ) then (paint) to do 4 19 inch rims ? yours came out really good i’m in the process of sanding but afraid to paint i suck at it

@DNALI

11 ай бұрын

I used 1 can of primer and 1 can of paint fie these 17s. I'd grab 2 cans of each just to be safe. The key is light coats in between drying.

Good detailed video. Do you need gloss finish after paint?

@EduardoFlores-qy1wq

3 жыл бұрын

Not need but if you want more of a gloss look then yeah

Nice !!!

look very good

Woohoooo!! Acetone fumes and a heater LOLOL thats funny:) Of course in the day I have used the oven to dry a Honda trail 50 gas tank. LMAO

@DNALI

Жыл бұрын

Yea not great. Probably taken years off my life with all the painting I've done in the past

Its about 12 dollars to replace the Acura symbol in the middle of the wheels. I just popped new ones on. Now I will do what you did but use car clear coat on top. I own a lot of curbs. lol.

how have they held up a year later

What about the clear coat spray

Does that spray paint contain sparkles?

Clearcoat, ? Looks great but I would have put some Clearwater. Thanks for Video

How are they holding up to wear and weather?

@DNALI

11 ай бұрын

I've sold this car a few years ago but I have a few other cars that I used the same paint and process and unless you curb them or have to change a tire the paint still looks fresh.

wow, no clear coats after all,,,? also,,, did you test in time if this paint resist a while on the road ???

Could you have given them a clear coat at the end , for a shinier finish ? Good job btw !

@DNALI

4 жыл бұрын

Yes clear coat can be added for more shine. I didnt add it to keep the cost down and also if I ever have to repair them again it will be easier just doing one coat of the silver

I like you videos bato 👍

How would I do this with just one wheel? Will it look the same as all the others or? :(

@DNALI

3 жыл бұрын

You would have to get the paint code for your wheels to match the OEM finish of your wheels. Then just follow this video but use the OEM paint instead of the rustoleum

I personally don’t like either intros if I’m being honest but I think you should choose the one you like the most

I just plastidipped mine. Probably the same day as you too

@jfresh2054

5 жыл бұрын

SonOfAHerbert how's it holding up

@SonOfAHerbert

5 жыл бұрын

@@jfresh2054 very well. The mechanic who just serviced me complimented it

No clear coat?

how many cans of paint did you use for all 4?

@ryanpeckphoto

3 жыл бұрын

He said 1 can of primer and 1 can of base coat and he has a bit left

Noticed clear coat wasnt applied is it needed ?

@DNALI

4 жыл бұрын

Just personal preference. Just wanted it to be as simple and cheap as possible

@B_HarTz

4 жыл бұрын

DNALI ya slap on some coats of clear to get that shine and protect all that hard work , came out dope

💥💥💥

i say first one but change the audio to something maybe car related like g35 revs lol

Can I just make the alloy shiney to the bone and use a few coats of clear coats?

@Macfrugal_

4 жыл бұрын

123 yes you can it would look much better than this

@jwill9877

4 жыл бұрын

It will also be alot more work because imperfections will show more. There's a trade off

Clear coat not exist 5 years ago?

Should you have added clear coat?

@DNALI

3 жыл бұрын

You can. It's really personal preference. I didn't add it just in case I have to make some touch-ups in the future it's one less step that I'll have to do

Instead of using playing cards you could use flash cards

Clear coat

Wheels look like new.

Man would have looked a lot better going back like it was with the almost polished high areas with just clear and juat paint on the lower sections

No clearcoat?

@bobjohnson1587

Жыл бұрын

Too cheap!

How many cans did you need

@DNALI

3 жыл бұрын

One can of primer and one can of paint

@hepzlawrence7710

3 жыл бұрын

@@DNALI is that for 4 wheels?

@DNALI

3 жыл бұрын

@@hepzlawrence7710 Yea but make sure you get the rustoleum 2X. 1 can of that will do 4 wheels. I've used other spray paint that doesn't cover as good and needed a can and a half for a set.

#2

I should give you mine to do....But you would kill me for the amount of spokes

If you wanted shiny you could have put a clear coat on .

O nome do acidente foi PAPUCAGEM, agradece ao se brother que segurou a sua sobrada. Nem sobe em uma Road que tu se mata. Julho foi o mês, também cai de Gravel e reconheço que foi vacilo meu rss