How to Repair Damaged Gelcoat the Right Way
Спорт
The fiberglass masters at Wildfire Marine demonstrate how to properly repair damaged gelcoat from start to finish. Repairing cracked or chipped gelcoat is essential for maintaining the integrity of your boat to avoid losing the waterproof protection gelcoat provides for the fiberglass underneath. Mike Sternberg lists all the materials he used to complete the gelcoat fix and covers solutions to common problems you might encounter during the gelcoat repair process. This DIY gelcoat repair is easy enough to do yourself if you need to fix a gelcoat chip or crack and you can still get professional results at a fraction of the price. For more information on DIY boat projects, see this link here: bit.ly/3nZbatO
Пікірлер: 21
Finally someone straight to the point and simple
Excellent. To the point. Not the usual verbage most guys get on with..this guy is worth listening to.
Amazing work
Thank you. This is very helpful.
Thanks!! Now i can fix those anchor chips!
Are there going to be full episodes anymore
Nice succinct video
No PPE? Isnt this incredibly unhealthy to grind without a respirator?
What does a repair like this cost?
@IamWeeklyBills
10 ай бұрын
it all depends on the individual and how much they charge a hour which would be anywhere from 45 a hour to 125 a hour but if I had to guess anywhere from 500-1500 dollars for this repair and wildfire is one of the best in the business so if i had to guess at least 1000 dollars. but not many people could blend gelcoat as well as he did that's years of experience this unfortunately is a dying trade!
He "Went ahead" 😂
Wait, you added a little mustard(from grocery store?)like a pigment to get slightly ivory colour?
@vernesecustoms
2 ай бұрын
Pretty sure he meant mustard colored gelcoat pigment.
I love the info, but the lack of dust protection or respiration from the fumes makes me cringe. At least he was wearing gloves while handling the chemicals...
Don't hammer and chisel. The best way is to use a grinder, either a small angle grinder or a die grinder. The reason is that you can see good laminate grom bad. Any shattered laminate will appear whitish. A hammer and chisel does not highlight these and it has to be ground in any case before being re-laminated or re- gelcoated. There are many ways 'to skin a cat'. But not all are thebest way.
That isn’t the right way to repair gel coat. If gelcoat is applied to thick it will crack. Which is what happens on boats like a Cabo. They get checking and stress cracks. That is wayyyyy to much gelcoat. Should’ve done a couple layers of chop to bring up the height than gelcoat so it’s thinner
@piotrtrocki3842
10 ай бұрын
since he was sanding each layer, did he add wax to all layers?
@mguidice3287
10 ай бұрын
@@piotrtrocki3842 wax only gets added to the final coat to remove the tack. If you do not have wax in the gel coat sanding is unnecessary If done in the allotted time slot IMO. If you do have wax sanding in-between coats is a must
@vernesecustoms
2 ай бұрын
I agree. Not exactly a first-class repair IMO
*Promo SM* 💋
Dude, wear a mask. No job is worth your lungs.