Followed this vid and turns out just cleaning the silicone and waste and putting it back did the job, saved a plumber call-out! Brilliant, thank you.

@dereton33

9 ай бұрын

Great job!

Most helpful vid on this in my humble, beginners opinion. Got it right, first time 👌🏽🤞🏽

@dereton33

2 жыл бұрын

Great to hear!

Didn't even know could replace a sink waste! Thanks Al and Jan.

@dereton33

4 жыл бұрын

No problem flickafy.

Showed my husband, we had no idea you could change it (or hadn’t thought of it) he will be following your instructions tomorrow haha :)

@dereton33

4 жыл бұрын

Good luck Lyndsay.

Thank-you so much for this video - i thought i would need to call a plumber to replace my sink easte, but after watching your easy to follow instructions, i was able to fit it myself and save money. Invaluable video!

@dereton33

2 жыл бұрын

You're welcome!

I finally managed to do this. I used a pair of pliers in the end to undo the nut. Fixed the new one and cleaned the u bend and it’s working perfectly now 👌😃

@dereton33

Ай бұрын

Excellent!

Great as always, you give people the confidence to takle these jobs!! Brilliant

@dereton33

4 жыл бұрын

Thanks Lee.

You done a grand job there and make things look very easy.....I hope you and your dear wife are doing ok....Hope you both have a lovely weekend....Sending you both loads of love xXx

@dereton33

4 жыл бұрын

Thank you very much Sharon all the best to you too. xx

Another great video! I watched it, I bought the kit, I done the job! Thanks!

@dereton33

2 жыл бұрын

Nice work!

Brilliant, as usual. Thank you for the instructions. Peace be unto you.

@dereton33

Жыл бұрын

No problem 😊

Absolute hero - this video was great, thank you so much!!

@dereton33

2 жыл бұрын

No problem

Good job Al 👍

@dereton33

4 жыл бұрын

Thanks PB.

Brilliant - really comprehensive!

@dereton33

3 жыл бұрын

Glad it was helpful!

Thank you very much. Great video. Saved me from a flooded kitchen cupboard 👍🙂

@dereton33

Жыл бұрын

Excellent!

Thanks for the video, handy to know it can be changed thanks

@dereton33

4 жыл бұрын

No problem Shane.

Awesome, thank you 😊😊👍

@dereton33

4 жыл бұрын

Thanks Lily. X

Thanks for the tutorial!

@dereton33

2 ай бұрын

No problem!

Excellent Thank you.

@dereton33

4 жыл бұрын

No problem.

Thanks for the vid! I didn't know the middle of the drainage was a threaded bolt. I just thought because of age I can't unscrew it underneath - just gotta pop out now and buy the new parts :-)

@dereton33

2 жыл бұрын

Right on

A great tip is the sharp edge of either of your removable plugs are what you use to tighten the centre screw. Your welcome! (I only found out a year ago 😂) No coins needed👍🏼

@dereton33

Жыл бұрын

Thanks for the info!

very easy to understand. Now i know what to do. Thanks

@dereton33

Жыл бұрын

No problem

Thanks for this 👍

@dereton33

2 жыл бұрын

No problem 👍

Another great video thanks. I'm tightening an existing sink. The "washer" between waste outlet and top of the stainless steel sink is very flimsy and worn. In its original state was probably not much thicker than some tape. I've been told a bed of silicone will do the job. Is that ok?

@dereton33

2 жыл бұрын

Yes fine.

Thank you so much

@dereton33

3 жыл бұрын

No problem

Good job. I was wondering if you had a video of increasing the flow rate of a shower hot feed. It's just a gravity fed system. Would a low pressure pump be required?

@dereton33

4 жыл бұрын

Yes a pump is best.

@SteS

4 жыл бұрын

@@dereton33 thank you. Do you have a video on that?

Hi! Thanks so much for the video! In the video you turned the connector clockwise to loosen it, is this the norm for these types of fittings? I’m struggling to undo mine as I assumed it would be anti-clockwise and now I’m worried I’ve tightened it instead 😬

@thejentaur2821

2 жыл бұрын

Ah! I’ve figured it out! It’s clockwise as I’m looking down the plug hole 😅

@dereton33

2 жыл бұрын

Yes, correct

Hi Al, any tips for removing silicon from a metal sink...I made a bit of a mess when replacing the sink. I got it all over my hands and then all over the new sink. Job done but sink is covered in a silicon film. Also, my sink waste has a white flimsy upper washer like the one you removed. Ive installed it but do you think this type does the job OK? Thanks. Keep the videos coming.

@dereton33

3 жыл бұрын

There is a silicon remover which will get rid of any leftover stuff. I still prefer to use plumbers mait instead of washers. Still try the washer, if it does not leak then leave well alone.

Great video. Can I put a bead of plumbers gold before putting the washer and silver cap into the sink? Thank you.

@dereton33

2 жыл бұрын

Yes you can!

@MohammedAli-1

2 жыл бұрын

@@dereton33 thank you very much 👍🏽

thank-you lovely

@dereton33

Жыл бұрын

You’re welcome 😊

Hi. Are the replacements a standard size or do you have to make sure you buy the correct replacement?

@dereton33

4 жыл бұрын

Make sure you buy the correct replacement Ian.

We're putting a new sink in today. Our waste has just one big washer, so should I use silicone as another washer?

@dereton33

2 жыл бұрын

No just plumbers mait.

I just ripped mine out while my mother was out shopping ( a huge rush so she wouldn't know what I was doing ). I unscrewed the bolt. My intention was just to measure the opening in the sink (thinking of putting an Insinkerator). When I tried to put everything back together I realised there was no brass thread (as seen in 2:47). After a few moments I thought it might have fallen down the U bend. I took that apart but nope. In the end I legged it to the hardware store and bought a new waste part. I am totally mystified. Where on earth could my brass nut have gone. Is it possible ours was glued in place?

@dereton33

3 жыл бұрын

It does happen a lot of times.

Do I need any cilicon aslo the sink mouth has a rally thin washer like a paper sheet ring will that be okay ???

@dereton33

4 ай бұрын

You will need some silicone, that thin washer is fine by the way.

Can you just replace the rubber seal or do you have to replace the full fitting?

@dereton33

2 жыл бұрын

Just the seal if you want to .

Are you at that bare knuckle boxing again 💪

Cheers Al. If you dont have a big bladed screw driver like you have, is there any other way to get that screw out?!

@MJ-ce6tv

4 жыл бұрын

Sometimes a 10p piece will do the trick, if it’s not too rusted. I usually keep a chisel handy, as the blade is wide enough. Careful you don’t slip with it though.

@dereton33

4 жыл бұрын

Thanks M J for the reply.

Didn’t have the big screwdriver to get in the top, will have to order one

@dereton33

Ай бұрын

Ok.

Has it stayed sealed or have you had to add any plumber's mait?

@dereton33

2 жыл бұрын

It stayed sealed.

Where did you get such a wide screw driver for the waste bolt? I wanna stop using wood chisels as I scratched a chrome one. How wide in mm?

@dereton33

2 жыл бұрын

15 mm.

What do you do when you find the new waste is 10mm too short or long and won't properly match the current trap? :)

@dereton33

Жыл бұрын

Extend the waste with a coupling if short or cut back the waste pipe if it is too long.

Hello , can a bathroom sink plug/drain be replaced ? Iv looked through your videos but couldn’t find one to do with it , thank you

@dereton33

3 жыл бұрын

Yes, absolutely.

@jojohnson8035

3 жыл бұрын

Great , is there a video of how to do it please ? Really need to change them , thank you

Do you need to use silicone under the rubber seal on the sink or is it overkill cheers great vid

@dereton33

Жыл бұрын

No that is overkill. The washers will survice.

@freedomfinalfrontier5878

Жыл бұрын

Thanks for the reply

I saw somewhere that you a ring of plumbers mait on the top (sink side) fitting. Do you need this or should the supplied washers do the trick?

@dereton33

Жыл бұрын

I prefer the plumbers mait.

@iwantagoodnameplease

Жыл бұрын

@@dereton33 Did you just use the foam washer for the purpose of this video then? I was expecting to see you whack out your favourite tool and put some mait on it!

Hi Al and Jan, hope you are both well. Al, would a dab of silicone be necessary here?

@dereton33

4 жыл бұрын

No none required the rubber seals are good.

@stevecrane17

4 жыл бұрын

If you dont have a rubber seal and need to use something to seal the waste I'd reccomend plumbers mait. Dont have to wait for it to go off as it never goes solid, its waterproof and you just remove the excess when you tighten the waste. Great product if you dont have a rubber seal. Hope this helps!

@ratchriat1716

4 жыл бұрын

you made it so easy and simple al enjoyed the video

@howardbanks7111

2 жыл бұрын

Can you just replace the rubber seal? Or do you need the full kit?

Hi, where did you get the adapter from?

@dereton33

2 жыл бұрын

Any plumbing shop or Amazon.

Where can I order the wide screwdriver? Went to Screwfix and they were all too small 😔

@dereton33

Ай бұрын

Amazon is best Jim.

@JimBob-vg2og

Ай бұрын

Could you kindly link me a suitable product? Struggling a lot to find what will work

When cleaning the old gasket meterial off be very careful around the hole in the sink ,these are razor sharp and most come with stickers on when new telling you to be careful. Ironicly i've cut myself more when taking the damn stickers off that warn you of it.

@dereton33

Жыл бұрын

Thanks.

How do you fix a single kitchen sink tht needs to be bonded

@dereton33

2 жыл бұрын

Ask an electrician.

You don’t even need a screwdriver and can just use the side of the stopper to open the screw in the trap.

@dereton33

6 ай бұрын

Thanks.

Why do you keep small women in jars under the sink