www.dkgarage.org Down pipe www.vr-speed.com/vrsf-335d-do...
Жүктеу.....
Пікірлер: 45
@braydenbrelnan62611 ай бұрын
I found that the easiest way to reach the forsaken bolt is to; Instead of loosening the bracket on top and fitting a 13 on from there, you use your phone to locate the bolt from the top of the engine bay by following the bracket, you can see the part of the bracket that screws into the top of the dpf Farley easily from the engine bay, you just follow the outermost side of the bracket to the bolt(if you are facing the rear of the car that is the side of the bracket you want to follow). Look at a diagram of the dpf online and you will see what I’m talking about. Then once you’ve located the bolt situate yourself on the bottom of your car where you can get a view of it and reach your socket up with a long extension and reach around right to the bolt. It’s actually not bad at all once you’ve located it from the bottom. I wish I had someone to tell me that before I hassled around finding out how to do it for well over an hour. My bolt had a black cloth covering it from sight so make sure to check the diagram of the bracket and move the cloth if you have it as well.
@byKruzL9 ай бұрын
Great video. Is this the same process for a 1.0 citreon c1
@dumdumdumbass Жыл бұрын
Just in time. I’m doing mine today with the same downpipe. Good stuff
@dkgarage5131
Жыл бұрын
💯
@diesel.bimmer
Жыл бұрын
how bad was it 😭 i’m scared to attempt mine lmao
@dkgarage5131
Жыл бұрын
@@diesel.bimmer pretty easy
@ziadajam5433
Жыл бұрын
@@diesel.bimmer only one way to learn bro. Keep in mind you need the tune after u delete the DPF and u might as well do an EGR and DEF delete so you can get one tune and call it a day
@omarelkhaldy879
2 ай бұрын
@@ziadajam5433where can I find this tune and can the tune just be good for all the codes for all the deletes?
@diesel.bimmer Жыл бұрын
who tuned you?
@mrtactics1969 ай бұрын
Does it matter what egt sensor I use off the dpf?
@fynalhour68217 ай бұрын
To get to that annoying 13mm, never had to remove anything from the top or do any of that extra stuff. Probably the best way to do it in my opinion is, just getting it from underneath. It’s extremely hard to fit the extension, 13mm and socket wrench in there but did in 10 minutes. I have an accessible lift but am sure you can do it with a jack. Hope this helps!!
@sccobyste4 ай бұрын
I have a DPF. is this the same as a DFP. Also I think BMW use metric bolts
@augustotheman Жыл бұрын
What year is yours? I got a 2011 and in the middle of this can’t get to the hidden motor mount Torx. Also can’t even find this hidden bolt you circle with the yellow in your vid. It’s behind the hoses?
@michaelward601
2 ай бұрын
I’m doing this right now on my 2011. There is no bolt there
@mtbtrailriding4165 Жыл бұрын
So your stock exhaust just fit right back on the vrsf downpipe?
@dkgarage5131
Жыл бұрын
Yes
@mtbtrailriding4165
Жыл бұрын
What did you use in place of the mufflers?
@dkgarage5131
Жыл бұрын
@@mtbtrailriding4165 I used this company muffler delete www.zaustworx.co.uk/product/bmw-335d-rear-silencer-deletes/
@bmwbuilds6028 Жыл бұрын
Help okay, on the little “box” the smaller sensor of the two which is reused In an aftermarket down pipe is plugged in on the second to last connector by the 02 or the one ?!?!
@bmwbuilds6028
Жыл бұрын
Do you have to do anything about the two hoses ?
@dkgarage5131
Жыл бұрын
@@bmwbuilds6028 yeah yeah oh ok yeah those just stay there I left them out since you deleted it you can just leave it as it .
@bmwbuilds6028
Жыл бұрын
@@dkgarage5131 alrighty and I need to figure out if anything is done with the two lines that went into the dpf or if they just hangout, and if the T line that used to go into the egr is fine just hanging out with a screw in it, you just blanked the sensor which 1 of the 3 things I need concreted if I plug it in the back plug front or it doesn’t even matter with a tune im hearing and in that case it just acts as a bolt but is just strange because it has two sensor ports, o2 and pyro where does the pyro go, in this case I’m taking it doesn’t even have to go back, but hose stuff too I need answers one day
@dkgarage5131
Жыл бұрын
@@bmwbuilds6028 the to lines just stay there
@Sincerelyyjay1 Жыл бұрын
Kudos brodie, am getting a 335d that's already tuned and deleted. Tune me in. What are some things to replace as soon as I get it? It's at 100k.
@shadowsiren3058
10 ай бұрын
Check all fluids, replace if needed, change crankcase vent, check power steering make sure its not leaking.
@hamiltonbeaniecat2826 Жыл бұрын
brave!
@lindseyhildrew8848 Жыл бұрын
how do I remove my PDF
@STUNRICK
11 ай бұрын
Right click, then select Delete
@Safsbmwlife Жыл бұрын
Dpf
@rickpercy87 Жыл бұрын
How long did this take you!
@dkgarage5131
Жыл бұрын
About a day
@fastshuther9 ай бұрын
I would suggest welding the other nut on that straight pipe, it’s not used & you can secure there’s no leaks
@martinkulik9466 Жыл бұрын
Don't be fooled. Guy made it look easy, but only changing those pressure converters and vacuum hose was nightmare as it's tight as hell. I won't even attempt this. Was changing water pump gasket, now I have driveshaft problem coz I left lying tire under the ramps and drove on it....
@jaime2838
Жыл бұрын
I totally agree. I just did a full vacuum hose and dpf replacement a few days ago and it was a pain in the ass. Getting to the back top bolt that holds the dpf bracket is extremely difficult.
@alisherruziev11614 ай бұрын
There’s absolutely no way you said “DFP and VSRF” 🤣🤣🤣 Mans needs to go back to school! LMAO
@Jagshemasher Жыл бұрын
I assume you gutted the cat?
@dkgarage5131
Жыл бұрын
No 4 inch single exit
@stevenlow9442
Жыл бұрын
@@dkgarage5131 - the cat is the part of the exhaust downstream of the existing DPF that is like a wide oval shape. To me it looked like you were refitting the original exhaust - although I noted you fitted some straight pipes to replace the mufflers. The cat needs to be gutted if you’re replacing the diesel particulate filter with the downpipe otherwise all the soot will simply accumulate in the cat.…. or did you install a 4 inch pipe from the downpipe right to the end of the exhaust so effectively got rid of all the existing exhaust system?
@dkgarage5131
Жыл бұрын
@@stevenlow9442 no I’m the video I replied the dpf delete which it’s a 3 inch downpipe and in the video I put the stock exhaust back on with a gutted scr and a muffler delete I just installed a 4 inch single like a week ago
@stevenlow9442
Жыл бұрын
@@dkgarage5131 Got it - thanks
@dkgarage5131
Жыл бұрын
@@stevenlow9442 I will post a cold start of the 4 inch start up rn
@yunusgundo8431 Жыл бұрын
Bro just bought a 335d would like to get some advice on mods and tunes amos @ad3m6o
Пікірлер: 45
I found that the easiest way to reach the forsaken bolt is to; Instead of loosening the bracket on top and fitting a 13 on from there, you use your phone to locate the bolt from the top of the engine bay by following the bracket, you can see the part of the bracket that screws into the top of the dpf Farley easily from the engine bay, you just follow the outermost side of the bracket to the bolt(if you are facing the rear of the car that is the side of the bracket you want to follow). Look at a diagram of the dpf online and you will see what I’m talking about. Then once you’ve located the bolt situate yourself on the bottom of your car where you can get a view of it and reach your socket up with a long extension and reach around right to the bolt. It’s actually not bad at all once you’ve located it from the bottom. I wish I had someone to tell me that before I hassled around finding out how to do it for well over an hour. My bolt had a black cloth covering it from sight so make sure to check the diagram of the bracket and move the cloth if you have it as well.
Great video. Is this the same process for a 1.0 citreon c1
Just in time. I’m doing mine today with the same downpipe. Good stuff
@dkgarage5131
Жыл бұрын
💯
@diesel.bimmer
Жыл бұрын
how bad was it 😭 i’m scared to attempt mine lmao
@dkgarage5131
Жыл бұрын
@@diesel.bimmer pretty easy
@ziadajam5433
Жыл бұрын
@@diesel.bimmer only one way to learn bro. Keep in mind you need the tune after u delete the DPF and u might as well do an EGR and DEF delete so you can get one tune and call it a day
@omarelkhaldy879
2 ай бұрын
@@ziadajam5433where can I find this tune and can the tune just be good for all the codes for all the deletes?
who tuned you?
Does it matter what egt sensor I use off the dpf?
To get to that annoying 13mm, never had to remove anything from the top or do any of that extra stuff. Probably the best way to do it in my opinion is, just getting it from underneath. It’s extremely hard to fit the extension, 13mm and socket wrench in there but did in 10 minutes. I have an accessible lift but am sure you can do it with a jack. Hope this helps!!
I have a DPF. is this the same as a DFP. Also I think BMW use metric bolts
What year is yours? I got a 2011 and in the middle of this can’t get to the hidden motor mount Torx. Also can’t even find this hidden bolt you circle with the yellow in your vid. It’s behind the hoses?
@michaelward601
2 ай бұрын
I’m doing this right now on my 2011. There is no bolt there
So your stock exhaust just fit right back on the vrsf downpipe?
@dkgarage5131
Жыл бұрын
Yes
@mtbtrailriding4165
Жыл бұрын
What did you use in place of the mufflers?
@dkgarage5131
Жыл бұрын
@@mtbtrailriding4165 I used this company muffler delete www.zaustworx.co.uk/product/bmw-335d-rear-silencer-deletes/
Help okay, on the little “box” the smaller sensor of the two which is reused In an aftermarket down pipe is plugged in on the second to last connector by the 02 or the one ?!?!
@bmwbuilds6028
Жыл бұрын
Do you have to do anything about the two hoses ?
@dkgarage5131
Жыл бұрын
@@bmwbuilds6028 yeah yeah oh ok yeah those just stay there I left them out since you deleted it you can just leave it as it .
@bmwbuilds6028
Жыл бұрын
@@dkgarage5131 alrighty and I need to figure out if anything is done with the two lines that went into the dpf or if they just hangout, and if the T line that used to go into the egr is fine just hanging out with a screw in it, you just blanked the sensor which 1 of the 3 things I need concreted if I plug it in the back plug front or it doesn’t even matter with a tune im hearing and in that case it just acts as a bolt but is just strange because it has two sensor ports, o2 and pyro where does the pyro go, in this case I’m taking it doesn’t even have to go back, but hose stuff too I need answers one day
@dkgarage5131
Жыл бұрын
@@bmwbuilds6028 the to lines just stay there
Kudos brodie, am getting a 335d that's already tuned and deleted. Tune me in. What are some things to replace as soon as I get it? It's at 100k.
@shadowsiren3058
10 ай бұрын
Check all fluids, replace if needed, change crankcase vent, check power steering make sure its not leaking.
brave!
how do I remove my PDF
@STUNRICK
11 ай бұрын
Right click, then select Delete
Dpf
How long did this take you!
@dkgarage5131
Жыл бұрын
About a day
I would suggest welding the other nut on that straight pipe, it’s not used & you can secure there’s no leaks
Don't be fooled. Guy made it look easy, but only changing those pressure converters and vacuum hose was nightmare as it's tight as hell. I won't even attempt this. Was changing water pump gasket, now I have driveshaft problem coz I left lying tire under the ramps and drove on it....
@jaime2838
Жыл бұрын
I totally agree. I just did a full vacuum hose and dpf replacement a few days ago and it was a pain in the ass. Getting to the back top bolt that holds the dpf bracket is extremely difficult.
There’s absolutely no way you said “DFP and VSRF” 🤣🤣🤣 Mans needs to go back to school! LMAO
I assume you gutted the cat?
@dkgarage5131
Жыл бұрын
No 4 inch single exit
@stevenlow9442
Жыл бұрын
@@dkgarage5131 - the cat is the part of the exhaust downstream of the existing DPF that is like a wide oval shape. To me it looked like you were refitting the original exhaust - although I noted you fitted some straight pipes to replace the mufflers. The cat needs to be gutted if you’re replacing the diesel particulate filter with the downpipe otherwise all the soot will simply accumulate in the cat.…. or did you install a 4 inch pipe from the downpipe right to the end of the exhaust so effectively got rid of all the existing exhaust system?
@dkgarage5131
Жыл бұрын
@@stevenlow9442 no I’m the video I replied the dpf delete which it’s a 3 inch downpipe and in the video I put the stock exhaust back on with a gutted scr and a muffler delete I just installed a 4 inch single like a week ago
@stevenlow9442
Жыл бұрын
@@dkgarage5131 Got it - thanks
@dkgarage5131
Жыл бұрын
@@stevenlow9442 I will post a cold start of the 4 inch start up rn
Bro just bought a 335d would like to get some advice on mods and tunes amos @ad3m6o
@dkgarage5131
Жыл бұрын
Just did sir
@terrymooneyham7849
Жыл бұрын
@@dkgarage5131 where you located?