thanks for the tuition dude. my N47 is leaking ever so slightly and so after watching your vid, I think it is the gasket on the rocker cover. glad I only have 4 injectors lol.

Great video that all us home mechanics can relate to. Thanks for posting.

Man I felt so bad when you said you didn’t get the rocker cover off! Thanks for putting this together it helped me prepare adequately. I have a n47 and I loosened the injectors and ran it for a few seconds before disassembling everything. The compression popped them lose and it came out with ease. Probs wouldn’t have worked for yours though!

@johnmorrison9072

Жыл бұрын

Brilliant, I will try that thank you

You showed exactly what it means to remove stuck injectors. That’s real life

Thanks so much for the process. This is a great insight into what to expect. Not too terribly complicated. Just like any other F chassis valve cover gasket replacement. Plan to do this soon but the injectors are the only thing giving me apprehension. BMW manual states to remove the injectors with light rotational movements LOL. Not sure if these guys have worked on a car with actual miles on them. Thanks again from Texas.

This is an excellent video, and I empathized when you mentioned having to put everything together to buy an injector puller. I wish I could offer you support, brother. Well done for your dedication and hard work. Subscribed.❤

Thanks for sharing! I hope your can get that last injector out.

thank you so much for sharing this.. im going to doing in a couple of days and this video will be my guide 👍👍

@johnmorrison9072

2 жыл бұрын

Great I’m glad to of help

A realistic view on N-series/What I'll struggle with shortly, 2016 535d(US spec,Single Turbo) also walnut blast intake manifold if caked to he'll. Cheers from Chattanooga!!

@johnmorrison9072

2 жыл бұрын

Yes I think I am due a walnut blasting on the intake It was done about 60,000 miles ago

Just watched this for a bit of insight before i do my mates E70 but must say when taking the leak off pipes from the injectors you dont need to remove the grey peice just lift it up and it splays the clips so the whole bit comes off in one 👍

20k on views! Banging.

I felt the pain in your outro. I have to do the valve cover gasket on my wife's F25 X3 N47. Not looking forward to it.

@johnmorrison9072

Жыл бұрын

Yeah I’m going to be giving it another go soon. Have an injector Puller on the way subscribe and you’ll be notified thank you will be a little bit of a short video

Thanks mate.

My injectors came out without a puller. I notice they move side to side when undoing injector line. Mine had no rust tho

Great video this not a straight forward handy job. Nice to the reality of working on these pigs on a driveway. Well done. Shame to have come so far for the kick in rhe nuts. Many thanks.

Do you have to get new bolts for the rocker cover when replacing the gasket? Cuz that was the case with the n52 for example.

@johnmorrison9072

Жыл бұрын

No, I don’t believe so you can remove stretch bolts at least three times before you need to replace them, especially on injector bolts

John, where did you buy the injector puller? Any links you could share, please? I'm about to do same job on my F11 N57 and I'm concern now that I may come to similar problem.

@johnmorrison9072

2 жыл бұрын

hello yes i didn't get the injector puller online sorry i got it from machine mart

How do you get around the other high pressure hose that is sat hanging over the cover? That’s my last thing I need to do to remove the cover other than that I’m stuck any advice welcome

@johnmorrison9072

5 ай бұрын

I don’t think I got that far into the job, are you on about the two hard steel lines that run up the side of the engine block. if it’s that much of a pain, you may have to take off the air intake, if you cannot pry it out of the way but I’m not 100% sure in what high pressure line you’re talking about

Fair play to you mate more patience than me 👍

I have light smoke coming from passenger side behind the engine it’s obv oil burning what seals are back there

@johnmorrison9072

4 ай бұрын

I wouldn’t have a clue about that one oil can only burn if it’s hits the manifold the only seal at back of the engine gearbox I believe would be the main seal Maybe you have a vacuum or boost leak or you need an injector seal hope this helps

hello John, what you think what is the main problem leaking oil on N57 on valve cover, I'm on 68.000 km F16

@johnmorrison9072

Жыл бұрын

i really dont know sorry buddy thay leak all over

Well eff. I was going to do it myself until I saw I have to give the car a wank too. I'll pay the shop lol.

@chris323i

2 жыл бұрын

lmao

@beingpresent5978

Жыл бұрын

😂do a benny hill tune at the same time … jokes aside very good informative video. Thanks a lot

do you know the part numbers for the gasket and injector seals?

@johnmorrison9072

Жыл бұрын

not right now i will cheek

@johnmorrison9072

Жыл бұрын

No (106671). 11 12 8 515 732

@johnmorrison9072

Жыл бұрын

Subscribe

So whats the go if those injectors are stuck like yours? How did you got it out in the end?

@johnmorrison9072

Жыл бұрын

i will be doing a vid very shortly on that

@johnmorrison9072

Жыл бұрын

I am extremely sorry, I have not yet removed injectors. I have not done enough research into finding the correct injector pump. I was going to make a vid on removing injectors but need to get the correct injector puller

use some wd 40

Can you give me a shoutout Keera singh of Wolverhampton 😮

@johnmorrison9072

Жыл бұрын

Subscribe to the channel lad and will definitely consider

Why do you use toy injector extractor? 😂

@johnmorrison9072

11 ай бұрын

It’s all I could buy at the time, didn’t have anything else

@igorvorobjov

11 ай бұрын

You just need a larger weight to your self constructed extractor. Just put a larger hammer without handle on longer axle. Also you can use different weights from the sport shop.