He should say, how to remove a LOOSE bathtub drain strainer without any special tools
@abelcarrillo1047
3 ай бұрын
Exactly😂
@Wolfsgarageinc
2 ай бұрын
I have no clue why everyone is so upset that the drain was already loose. How do you think it got that way?
@sylvialoman7792
8 күн бұрын
I just got my drain out using this method, and it was very tight, I had to use enough force that I damaged my channel locks but it got the job done
@NateFreestyle
4 күн бұрын
@@Wolfsgarageinc People would have liked to hear in the video that it's already loose via the method you showed. Either that or show the process from the beginning.
@ashlaunicaalpari4584 Жыл бұрын
Holy crap! After fudging with this thing for hours….. your a miracle!! This drain has been on here for like 30yrs till now! 😊😊
@knotallthere6611 ай бұрын
Step one make sure drain is loose before you start filming
@Wolfsgarageinc
2 ай бұрын
I have no clue why everyone is so upset that the drain was already loose. How do you think it got that way?
@swessel753 жыл бұрын
THANK YOU !!! This is exactly what I needed and it just popped up on my feed from another related video! Loooove KZread!
@EmefGriffin
Жыл бұрын
SAME 🙌🏾
@dannyboileau5927
Жыл бұрын
Amen
@AnaFlores-nh9fx5 ай бұрын
Best method ever ! Just pulled out 20 years worth of hair. Appreciate you bro 🙏🏽
@mre912 Жыл бұрын
That was so clutch man. I'm doing my bathroom demo today for a full remodel to save myself some money. Thanks for the awesome tip.
@reelreviews982 Жыл бұрын
Wow it worked!! Thank you so much!! I ran out to get the tools and still forgot a flathead screw driver, so I still had no leverage and couldn’t do it. Thanks again!!
@GregCarlet20 күн бұрын
Dude, yes! Miracle! Life saver! 😂 thank you!
@davedavis396310 ай бұрын
I tried that, broke my channel locks, and crossbar, then I got mad and threw my hammer and broke the mirror. Then while I was screaming I cut my feet on the glass and slipped and got a concussion
@6Legend3NO
8 ай бұрын
Sounds like you need anger management
@Blap552
7 ай бұрын
Doh!😂
@user-fx3fu1nc1r
7 ай бұрын
Days of my life 2.0
@joshuacurl1567
5 ай бұрын
Same result here man, mothereffer
@lexiloulovesyou18
4 ай бұрын
womp womp
@calanprc3 Жыл бұрын
Thank you for your ingenuity! Saves me from buying another use once tool!!
@Kriswixx2 ай бұрын
You know I saw this video a couple weeks ago and today I did my first bathroom install and it took me forever to get that part out and now watching this video I realized I saw your video long time ago and just didn't retain the knowledge and dog on it I brought my channels but I didn't even use them that way It took me a long time to get the old one out but I'm excited It looks really nice no leaks and they're happy😅
@Kriswixx
2 ай бұрын
The install went awesome I did another bathroom took half the time and I also did a kitchen sink so I feel real good about it Thanks for the know-how
@Sooochio Жыл бұрын
Thank you! Saved me $13! Didn’t have to buy a special tool.
@Charliegirl219 күн бұрын
Thanks, i was trying to put the channe locks in the other way and wouldn't fit. Lol glad i seen this.
@craftpaint1644 Жыл бұрын
"With enough leverage I can move the world" - some ancient dude
@xcentricstudios2912
Жыл бұрын
Archimedes
@putopoveda2 жыл бұрын
Of course I come across this video after struggling with my sink drain! Lol 😂
@tydavidson65283 ай бұрын
I used a similar approach but your analogy helped. Thank you!!
@gotchaplumberАй бұрын
Never thought of that one... Thank you.
@CLIFFORDHENRY20123 ай бұрын
Great video. Thanks
@krislachowski18 күн бұрын
Worked for me, thanks!
@marlandojames212411 ай бұрын
Recently watched this video...& It work for me... thank you!
@audreybowles6357 Жыл бұрын
Thank you. You just saved my project today ❤
@artanndoni7048 Жыл бұрын
Good luck if it’s more than 10 years in there
@lymanturner7231
Ай бұрын
Thank you very much! I removed it using your way. I applied Spry w40, waited for couple of hours. I appreciate it!!
@holdernewtshesrearin5471 Жыл бұрын
Uh huh. I want to see you do that with a drain shoe that isn't already loose .
@Wolfsgarageinc
10 ай бұрын
How do you think I got it loose?
@carrierosales82382 жыл бұрын
You just saved me big bucks. Thank you so much!
@rhondaflanagan22784 ай бұрын
Do you have any tips if you're cross part is broken
@Kevin-nj6yqАй бұрын
Thanks! Worked like a charm
@nebmilo5024 Жыл бұрын
but 95% of the time it's not going to be that easy
@Wolfsgarageinc
Жыл бұрын
This is for informational purposes only. Your mileage may vary.
@lachlandonaldson
10 ай бұрын
@@Wolfsgarageincworked great for me!
@dustinstevens3617
10 ай бұрын
99.8%
@devilmecare
9 ай бұрын
The t was gone in mine because it was so old. I sawed it and twisted it out. Took less than 10 minutes. Just replaced it.
@Blap552
7 ай бұрын
@@devilmecaresame here,I'll try this aftn,guess I'll need a small hacksaw...
@samuelhorowitz5029PLUMBCRAZY10 ай бұрын
You should have started the video before you already loosened the spud.. that's how you teach .. not after you did the hardest part.. show the struggle lol😊
@whathitwonder4037
3 ай бұрын
kzread.info/dash/bejne/hqOTsdqrnqerf7Q.html
@Wolfsgarageinc
2 ай бұрын
Didn’t want myself swearing on film. 😅
@brandysalgado81918 ай бұрын
I did it! I wanted to add a picture but it won't let me. Thank you so much!
@mayasoto86476 ай бұрын
Thanks bro, it helped me a lot...🎉
@vanndakab Жыл бұрын
Thank you 🙏 so much, you really saved my life 😊
@tracyweiland1767 Жыл бұрын
The easiest way to remove this is by cutting a couple slits with a dremmel and Voila!
@stevenbelanger76607 ай бұрын
Worked well bro, I used a broken breaker bar for more leverage and it came off in seconds.. Thx for the tip.
@tomgnyc
5 ай бұрын
If you're using a breaker bar for breaking then it's not broken.
@stevenbelanger7660
5 ай бұрын
@@tomgnyc Lol well the end is L shaped and the 1/4 tip swivel end is out 1 tip of the y is broken... so broken braker bar...
@pauleskridge72093 ай бұрын
Thanks for sharing this
@jupiter704011 ай бұрын
Thank you now I need new channel locks
@Rebekahtessf7 ай бұрын
Thank youuu it worked
@keyfield89678 ай бұрын
Thanks!!
@Jdogthepim Жыл бұрын
Yall some hatters if done correctly it is that ez! I just did mine right now also make sure that u hammer the soft hand grips of the channel locks into location and go slowly as your turning cuz if not that's how u screw up and break stuff
@melissabee57084 ай бұрын
Thank you, I’m going to try it.
@mikedizzy866 ай бұрын
Awesome quick hack!!
@user-fx3fu1nc1r7 ай бұрын
I think every toolbox in America has those channel locks
@stepsintolife10192 ай бұрын
So what you pulled out the special tool first loosened it up and then try to show a hack way to loosen that up with a pair of channel locks.. awesome
@Wolfsgarageinc
2 ай бұрын
I guess it’s a free country. Think what you want. Worked for me.
@user-yl2sp2ru8z6 ай бұрын
Cool thanks
@jrfrom6172 жыл бұрын
This helped thanks man!
@daves28222 ай бұрын
My channel locks broke the cross bar, had to cut the sides of thr the drain cover w a sawzall just a bit, and used a prybar as a wrench.
@walersondocarmo35813 ай бұрын
Thx
@dixbowman34523 ай бұрын
Wish I would have saw this before I broke my tub.
@Neecee6156 ай бұрын
And if the cross bars are completely gone?
@papatriot98827 ай бұрын
Thank you!
@jasonmcfarland3696 Жыл бұрын
You said without any special tools but you're using grandpa's channel locks
@Wolfsgarageinc
2 ай бұрын
You’re not wrong…
@brysoncobb8 ай бұрын
Great tip thanks
@zacharyherndon597511 ай бұрын
Bro definitely used the tool meant for this before the video based on how loose it is 💀
@Wolfsgarageinc
2 ай бұрын
😂wait, there’s a tool??
@Iwondera5 ай бұрын
Instructions unclear I broke the entire universe.🎉 Not happy
@anthonyamato31923 ай бұрын
I got those same chanel locks
@SoCalDanny9 ай бұрын
Wow thanks!!!
@diperez6697 Жыл бұрын
Thank you times a zillion🎉🎉🎉🎉
@sirenscreams8 ай бұрын
This is awesome! What do you do if the screw is too tight though? :(
@TheAbyssGazedBack9 ай бұрын
Any advice if your drain doesn’t have the cross bars? My drain has small channels across from each other about 1.5mm deep and 3mm wide. I just can’t get it to budge! Any tips appreciated!
@Wolfsgarageinc
2 ай бұрын
I would cut a couple of grooves in the Outer ring with a dremel or cutoff wheel and then hammer it with a chisel or flathead screwdriver.
@rafaelm3155 Жыл бұрын
What do u do when the drain is broken
@Joseph-ib7hr5 ай бұрын
Yeah that's what that guy said. Had to remove a tub drain when it's already loose. You can undo it with your fingers😮
@ishootfaces722 Жыл бұрын
I'm literally bout to try this right now. Was gonna start beating the shit out of it but thought hey KZread it 😂😂😂
@Mazel_Tov_888 Жыл бұрын
love it!
@GunBigotHater Жыл бұрын
Mine turns, but doesn’t come out!
@Thekidthatdid4084 ай бұрын
I tried this an I’m still working it lol. It’s a pain in the ass at first but after a while it should brake the seal
@blackstarafro2 Жыл бұрын
Do you have one for broken cross bars 😢
@lukemarkert71726 ай бұрын
Part 2 - How to reattach the drain to a loose PVC pipe. ???
@kyleb19989 ай бұрын
Tub wrench is 11$ at Home Depot
@Mac-StayTrue
8 ай бұрын
They break I tries a husky cross T one
@texastuna2090 Жыл бұрын
One is loose already and second it’s never that easy especially when some people use cheap putty that dries and causes it to lock up
@Joshyohmygoshy Жыл бұрын
What if those little things broke
@Mac-StayTrue8 ай бұрын
Use oil unrust spray before learned the hard way lol,
@dmcsunshine1 Жыл бұрын
It doesn’t always come out! You can crack your drain!
@blipblip88 Жыл бұрын
Clever tech tip.
@RCDisiac Жыл бұрын
This is how I've always done this until one day I bought an expansion plug to grip it
@genemyersmyers6710 Жыл бұрын
Been there done that ,appartment maint.
@dannyyo794810 ай бұрын
So thats how those channel locks get handles messed up. Lol
@abelcarrillo10473 ай бұрын
Now make a video where u’re removing an old drain shoe that has nothing to get a grip on😂
@scottbattaglia85953 ай бұрын
Just so you know, sometimes they literally need to be cut out...... I have had some that have destroyed the channel locks.....
@SilverSpringHomesPro Жыл бұрын
I like how yours was loose before the pliers handle technique was used…
@MrAlejandro4325
Жыл бұрын
He probably did it before hand so he could demonstrate with one hand
@FC2ESWS2 ай бұрын
Is that a Moen?
@rafaelm3155 Жыл бұрын
I don’t use Channel locks does it work with Milwaukee channel locks 😅let me see that
@briandunn88982 ай бұрын
Cmon man that was already loose...
@Wolfsgarageinc
2 ай бұрын
I have no clue why everyone is so upset that the drain was already loose. How do you think it got that way?
@rw24527 ай бұрын
Don't bend your channel locks by prying something between the handles. Grip where both jaws meet with another channel lock or pipe wrench.
@rw2452
7 ай бұрын
But I guess one would still be bending them lol😂
@gofins33 Жыл бұрын
What do I do if the cross bars are completely broken and missing?
@Roxanne-tc3xy
Жыл бұрын
I'm in the same boat
@jeremiahkeele4659
9 ай бұрын
Hammer and chisel or flat head screwdriver. Dig in hitting it to the left to hopefully get it loosened
@JayeMauri4 сағат бұрын
How to break your tools …
@TheBmonster13 жыл бұрын
I tried that but it bent my Chanel locks
@emmasdad54263 ай бұрын
Bs! By the time you have to replace the tub drain the inner posts are no longer there.
@slcwest754 ай бұрын
I'm confident mine has like 60 years of corrosion caked all over it, gonna crack something
@davidgearardo1788 Жыл бұрын
barbell drain tool is like less than ten bucks, put it in your tool box, or break cross bars and fight them.
@user-fj4en7cq8d4 ай бұрын
How to make a 10 second video a full minute
@tboned708 ай бұрын
Crossbars are broken so I had to buy a Tool,.......
@mrslisahunt919 ай бұрын
Yeah mine is just stuck as hell and it has nothing on the inside no cross bars or anything 😢
@ByKristyLin8 ай бұрын
i'm turning it but it won't pop out
@hbtubman3 жыл бұрын
It's already loose.the T breakes out even with the correct tool.a expanding tool might save them the cost of a plumber.but when it's all this welded together ,concider that if the trap snaps and there is no acsess ecept through the wall of a two story home.you might have just turned a twenty dollar over the old one investment into a plumber a stuco repair and a plumber.a grand at least.you don't fix this with a good pair of Chanel locks.you Will ruin those aswell.a dremel tool and small diamond blade and then a hack saw with no top bar going over it.anf you still might break the trap where the overflow and the p trap are just fitted together without being solid.water in drains is not a pressure fitted water tight strength.its gravity.seal and if it backs up it will leak.i love the dys vidios on the web..but watch more than one.im sure this works once in a while .but old plumbing is the hardest thing I've ever had to do.son of a plumber and thirty years as a bathtub refinishing contractor and kitchen and bath remodel.
@brentcook22617 ай бұрын
Don’t do this. Spend a few bucks and get the tub drain tool. Or… take your chances.
@eudyvisioncreations2 ай бұрын
Don’t do this. Seriously.
@boybye Жыл бұрын
Is this easy or like would I need strength
@Wolfsgarageinc
Жыл бұрын
Depends on your application
@josesanchez1728 Жыл бұрын
The tub wrench tool cost 10 bucks Better than messing up those Chanel locks doing that
Пікірлер: 154
He should say, how to remove a LOOSE bathtub drain strainer without any special tools
@abelcarrillo1047
3 ай бұрын
Exactly😂
@Wolfsgarageinc
2 ай бұрын
I have no clue why everyone is so upset that the drain was already loose. How do you think it got that way?
@sylvialoman7792
8 күн бұрын
I just got my drain out using this method, and it was very tight, I had to use enough force that I damaged my channel locks but it got the job done
@NateFreestyle
4 күн бұрын
@@Wolfsgarageinc People would have liked to hear in the video that it's already loose via the method you showed. Either that or show the process from the beginning.
Holy crap! After fudging with this thing for hours….. your a miracle!! This drain has been on here for like 30yrs till now! 😊😊
Step one make sure drain is loose before you start filming
@Wolfsgarageinc
2 ай бұрын
I have no clue why everyone is so upset that the drain was already loose. How do you think it got that way?
THANK YOU !!! This is exactly what I needed and it just popped up on my feed from another related video! Loooove KZread!
@EmefGriffin
Жыл бұрын
SAME 🙌🏾
@dannyboileau5927
Жыл бұрын
Amen
Best method ever ! Just pulled out 20 years worth of hair. Appreciate you bro 🙏🏽
That was so clutch man. I'm doing my bathroom demo today for a full remodel to save myself some money. Thanks for the awesome tip.
Wow it worked!! Thank you so much!! I ran out to get the tools and still forgot a flathead screw driver, so I still had no leverage and couldn’t do it. Thanks again!!
Dude, yes! Miracle! Life saver! 😂 thank you!
I tried that, broke my channel locks, and crossbar, then I got mad and threw my hammer and broke the mirror. Then while I was screaming I cut my feet on the glass and slipped and got a concussion
@6Legend3NO
8 ай бұрын
Sounds like you need anger management
@Blap552
7 ай бұрын
Doh!😂
@user-fx3fu1nc1r
7 ай бұрын
Days of my life 2.0
@joshuacurl1567
5 ай бұрын
Same result here man, mothereffer
@lexiloulovesyou18
4 ай бұрын
womp womp
Thank you for your ingenuity! Saves me from buying another use once tool!!
You know I saw this video a couple weeks ago and today I did my first bathroom install and it took me forever to get that part out and now watching this video I realized I saw your video long time ago and just didn't retain the knowledge and dog on it I brought my channels but I didn't even use them that way It took me a long time to get the old one out but I'm excited It looks really nice no leaks and they're happy😅
@Kriswixx
2 ай бұрын
The install went awesome I did another bathroom took half the time and I also did a kitchen sink so I feel real good about it Thanks for the know-how
Thank you! Saved me $13! Didn’t have to buy a special tool.
Thanks, i was trying to put the channe locks in the other way and wouldn't fit. Lol glad i seen this.
"With enough leverage I can move the world" - some ancient dude
@xcentricstudios2912
Жыл бұрын
Archimedes
Of course I come across this video after struggling with my sink drain! Lol 😂
I used a similar approach but your analogy helped. Thank you!!
Never thought of that one... Thank you.
Great video. Thanks
Worked for me, thanks!
Recently watched this video...& It work for me... thank you!
Thank you. You just saved my project today ❤
Good luck if it’s more than 10 years in there
@lymanturner7231
Ай бұрын
Thank you very much! I removed it using your way. I applied Spry w40, waited for couple of hours. I appreciate it!!
Uh huh. I want to see you do that with a drain shoe that isn't already loose .
@Wolfsgarageinc
10 ай бұрын
How do you think I got it loose?
You just saved me big bucks. Thank you so much!
Do you have any tips if you're cross part is broken
Thanks! Worked like a charm
but 95% of the time it's not going to be that easy
@Wolfsgarageinc
Жыл бұрын
This is for informational purposes only. Your mileage may vary.
@lachlandonaldson
10 ай бұрын
@@Wolfsgarageincworked great for me!
@dustinstevens3617
10 ай бұрын
99.8%
@devilmecare
9 ай бұрын
The t was gone in mine because it was so old. I sawed it and twisted it out. Took less than 10 minutes. Just replaced it.
@Blap552
7 ай бұрын
@@devilmecaresame here,I'll try this aftn,guess I'll need a small hacksaw...
You should have started the video before you already loosened the spud.. that's how you teach .. not after you did the hardest part.. show the struggle lol😊
@whathitwonder4037
3 ай бұрын
kzread.info/dash/bejne/hqOTsdqrnqerf7Q.html
@Wolfsgarageinc
2 ай бұрын
Didn’t want myself swearing on film. 😅
I did it! I wanted to add a picture but it won't let me. Thank you so much!
Thanks bro, it helped me a lot...🎉
Thank you 🙏 so much, you really saved my life 😊
The easiest way to remove this is by cutting a couple slits with a dremmel and Voila!
Worked well bro, I used a broken breaker bar for more leverage and it came off in seconds.. Thx for the tip.
@tomgnyc
5 ай бұрын
If you're using a breaker bar for breaking then it's not broken.
@stevenbelanger7660
5 ай бұрын
@@tomgnyc Lol well the end is L shaped and the 1/4 tip swivel end is out 1 tip of the y is broken... so broken braker bar...
Thanks for sharing this
Thank you now I need new channel locks
Thank youuu it worked
Thanks!!
Yall some hatters if done correctly it is that ez! I just did mine right now also make sure that u hammer the soft hand grips of the channel locks into location and go slowly as your turning cuz if not that's how u screw up and break stuff
Thank you, I’m going to try it.
Awesome quick hack!!
I think every toolbox in America has those channel locks
So what you pulled out the special tool first loosened it up and then try to show a hack way to loosen that up with a pair of channel locks.. awesome
@Wolfsgarageinc
2 ай бұрын
I guess it’s a free country. Think what you want. Worked for me.
Cool thanks
This helped thanks man!
My channel locks broke the cross bar, had to cut the sides of thr the drain cover w a sawzall just a bit, and used a prybar as a wrench.
Thx
Wish I would have saw this before I broke my tub.
And if the cross bars are completely gone?
Thank you!
You said without any special tools but you're using grandpa's channel locks
@Wolfsgarageinc
2 ай бұрын
You’re not wrong…
Great tip thanks
Bro definitely used the tool meant for this before the video based on how loose it is 💀
@Wolfsgarageinc
2 ай бұрын
😂wait, there’s a tool??
Instructions unclear I broke the entire universe.🎉 Not happy
I got those same chanel locks
Wow thanks!!!
Thank you times a zillion🎉🎉🎉🎉
This is awesome! What do you do if the screw is too tight though? :(
Any advice if your drain doesn’t have the cross bars? My drain has small channels across from each other about 1.5mm deep and 3mm wide. I just can’t get it to budge! Any tips appreciated!
@Wolfsgarageinc
2 ай бұрын
I would cut a couple of grooves in the Outer ring with a dremel or cutoff wheel and then hammer it with a chisel or flathead screwdriver.
What do u do when the drain is broken
Yeah that's what that guy said. Had to remove a tub drain when it's already loose. You can undo it with your fingers😮
I'm literally bout to try this right now. Was gonna start beating the shit out of it but thought hey KZread it 😂😂😂
love it!
Mine turns, but doesn’t come out!
I tried this an I’m still working it lol. It’s a pain in the ass at first but after a while it should brake the seal
Do you have one for broken cross bars 😢
Part 2 - How to reattach the drain to a loose PVC pipe. ???
Tub wrench is 11$ at Home Depot
@Mac-StayTrue
8 ай бұрын
They break I tries a husky cross T one
One is loose already and second it’s never that easy especially when some people use cheap putty that dries and causes it to lock up
What if those little things broke
Use oil unrust spray before learned the hard way lol,
It doesn’t always come out! You can crack your drain!
Clever tech tip.
This is how I've always done this until one day I bought an expansion plug to grip it
Been there done that ,appartment maint.
So thats how those channel locks get handles messed up. Lol
Now make a video where u’re removing an old drain shoe that has nothing to get a grip on😂
Just so you know, sometimes they literally need to be cut out...... I have had some that have destroyed the channel locks.....
I like how yours was loose before the pliers handle technique was used…
@MrAlejandro4325
Жыл бұрын
He probably did it before hand so he could demonstrate with one hand
Is that a Moen?
I don’t use Channel locks does it work with Milwaukee channel locks 😅let me see that
Cmon man that was already loose...
@Wolfsgarageinc
2 ай бұрын
I have no clue why everyone is so upset that the drain was already loose. How do you think it got that way?
Don't bend your channel locks by prying something between the handles. Grip where both jaws meet with another channel lock or pipe wrench.
@rw2452
7 ай бұрын
But I guess one would still be bending them lol😂
What do I do if the cross bars are completely broken and missing?
@Roxanne-tc3xy
Жыл бұрын
I'm in the same boat
@jeremiahkeele4659
9 ай бұрын
Hammer and chisel or flat head screwdriver. Dig in hitting it to the left to hopefully get it loosened
How to break your tools …
I tried that but it bent my Chanel locks
Bs! By the time you have to replace the tub drain the inner posts are no longer there.
I'm confident mine has like 60 years of corrosion caked all over it, gonna crack something
barbell drain tool is like less than ten bucks, put it in your tool box, or break cross bars and fight them.
How to make a 10 second video a full minute
Crossbars are broken so I had to buy a Tool,.......
Yeah mine is just stuck as hell and it has nothing on the inside no cross bars or anything 😢
i'm turning it but it won't pop out
It's already loose.the T breakes out even with the correct tool.a expanding tool might save them the cost of a plumber.but when it's all this welded together ,concider that if the trap snaps and there is no acsess ecept through the wall of a two story home.you might have just turned a twenty dollar over the old one investment into a plumber a stuco repair and a plumber.a grand at least.you don't fix this with a good pair of Chanel locks.you Will ruin those aswell.a dremel tool and small diamond blade and then a hack saw with no top bar going over it.anf you still might break the trap where the overflow and the p trap are just fitted together without being solid.water in drains is not a pressure fitted water tight strength.its gravity.seal and if it backs up it will leak.i love the dys vidios on the web..but watch more than one.im sure this works once in a while .but old plumbing is the hardest thing I've ever had to do.son of a plumber and thirty years as a bathtub refinishing contractor and kitchen and bath remodel.
Don’t do this. Spend a few bucks and get the tub drain tool. Or… take your chances.
Don’t do this. Seriously.
Is this easy or like would I need strength
@Wolfsgarageinc
Жыл бұрын
Depends on your application
The tub wrench tool cost 10 bucks Better than messing up those Chanel locks doing that
I did it and it keeps spinning and wont come out
When the cross is gone this doesn't work.
Ma era già smontata 😂😂😂😂