Simon... thank you for this video. I removed my Disco 5 bumper cover today to install some fog lights. It is essentially exactly the same as the L494. Referred back to your video multiple times!!! kj

Excellent video and helped me remove the bumper perfectly to replace park sensors and fog light covers. Thank you!

Thanks for posting this. We recently had to replace our L494 headlights. Very helpful!

@L663

2 жыл бұрын

Glad it helped!

Have you considered doing a 2019 facelift of the front end (bumpers and wings) which should in theory also let you upgrade to the new matrix front lights?

Great video. Thank you so much for posting this one and all the others for the L494 that you have. Question about the end caps (bottom corner pieces). Can you remove and replace those while the bumper is on the car? Mine are beat up and I would like to replace them. Thank you

you have so much fun love it.

@L663

3 жыл бұрын

And that is from Mr Love himself !

Quite a lot of work to change the head lights / fog lights.. What height were you flying at, when you had the bird strike, lucky it didn't go thru the windshield.... as always very informative ... well done to all..

Dead birds,straw! Haha ,,I think you need to get the power washer to those cooler rads! Keep them coming guys 👍

@L663

3 жыл бұрын

Yes straight after this video we did just that - got it over to the pressure washer for a good clean off !

Dose this apply to 2017 to 2019 and 2020 front headlight grill and bumper conversion?

thanks for the info. i needed my sensor replacement. and didnt know how .

@L663

2 жыл бұрын

Glad it helped !

Please do a video showing how to take off the rear spoiler and align the rear tailgate. The strip (same as led tailgate strip) sits lower than the shoulders of it seems 75% of RRS. The L494 wasn’t designed for the tailgate to sit lower yet they leave the factory this way. Would be great to see how to fix it for the L494 Tailgate Droop Club!

have you seen the new full led pixel headlights by RD CUSTOM..no body change required

Can you keep the same bumper and replace lower grill With svr mesh where tow eye go?

Good vid tyler

It’s amazing how the orange paint pen fairy gets there before you!

u guys r awesome . I wish your shop was in Florida . I have A 2010 range rover sprt autobiography for some reason I can't GET the ( ECO STOP - START ) 2 WORK . IT USED 2 WORK BUT FOR SOME REASON IT STOP WORKING . IF U HAVE ANY IDEA PLEASE LET ME ( NO ) I WOULD APPRECIATE A LOT . ALSO I WAS WONDERING IF U GUYS R STILL SELLING THE STEP BAR FOR THE RANGE ROVER . BY THE WAY I MISSED YOUR VIDEOS ...

Would love to see you guys make a grill that deletes the fog lights. Lots of demand for that I bet. Especially for us that can’t swap to a SVR bumper due to cameras and parking sensor differences. Would greatly improve the look without a lot of money spent.

@L663

3 жыл бұрын

Yes we did talk about that yesterday - we were looking at adding the later fog light but that was tricky due to space etc - but i think I agree with you that just ditch the fog lamp !

@WRCWRX

3 жыл бұрын

@@L663 yes I think most would prefer the no fog light look. I never use them anyway.

Can you tell me if the plastic bracket that clamps the bumper to the wing is the same for the 2013 as the 2018? Thanks

Looking fwd to see the new bumper fitted , do you have to replace fenders ( wings ) as well for this upgrade or it’s just the bumper ?

@L663

3 жыл бұрын

It looks like the wings ( fenders ) will need to be changed !

Don't need to remove the 2 x m6 bolts from the rails but it does help to loosen them

Need vid showing removal of door card to replace Drivers side window module on a uk 2014 Discovery Sport 2018 is one available any place

Thanks again for the video. Very helpful!After replacing the headlight assembly everything seems to work except the drl’s work with headlights on or parking lights on but not working strictly as drl’s ….. any suggestions?

@L663

2 жыл бұрын

I think the DRLS are driven by the LINbus system on the car. I cannot see that they have coded this to the car. So does one headlight behave different to the other one ?

@WHScottII

2 жыл бұрын

@@L663 so no. They both behave the same. And they are brand new Magneti Marelli (. The drl’s are on with headlights on or when parking lights are on but do not seem to function as pure drl’s during the day

@WHScottII

2 жыл бұрын

Hey so actually they are working. Sorry for the confusion. I believe I was getting fooled by the ambient light sensor. It was getting dark here so the headlights were on. 🤦🏻thanks again for the video!

More bravery!! I hope the holes and bolts line up again when you put the new one on...there are a lot of them to be slightly out and constant jiggling to get them back again! Better than a Hitchcock film...will the SVR become an SV Oh..that should line up...umm..😃😃😃😃😃😃🤞🏻🤞🏻🤞🏻🤞🏻

After removing the front bumper (facia), can you remove the whole front clip on these to access the engine better?

@L663

Жыл бұрын

Not really - you have to then remove all the radiators - and air conditioning radiator to more access to the engine - so it will help but there are more items to unbolt.

Hi, do you have a video removing the front guard (silver part) for your disco 5?

@L663

2 жыл бұрын

No sorry - we only had the D5 as a loan car for a short time !

Have you ever changed the blindspot monitor sensor? Is it possible to do?

@L663

2 жыл бұрын

Hi - this is not something we have tried yet !

Great video. I noticed the car didn’t have radiator shutter assembly on when you removed the grille. Had you already removed it?

@L663

Жыл бұрын

Good point - not sure if thats because its the V8 supercharged.

I have 2016 Range Rover sport hse I need a d3s 35w lightbulb does anyone know if I need 6000 or the 4500 or …as far as the color of the light ?

Hello - does the L494 require body off for some jobs like it’s the previous generation?

@L663

3 жыл бұрын

That would be impossible as the body and the chassis are one ! You need to drop the rear subframe on for some jobs - i need to do this to fix the electric rear differential !

Did you figure out the brake light with the light bar?

@L663

3 жыл бұрын

Hi yes we did kzread.info/dash/bejne/fKep2qOdoJDIhKw.html These will be back on sale soon - did you buy one of the first batch ?

The little screw behind the numberplate. Do you mean that this is hidden and that we must remove the numberplate to get access to this and undo it also first. Thanks

@L663

Жыл бұрын

Yes from memory there was one behind the plate.

Hope The Stig returns to live soon!

@L663

3 жыл бұрын

He will be back in all his splendour very soon I hope !

@CarpioTheOnlyOne

3 жыл бұрын

@@L663 hope they are being kind as you must have increased sales for them

@L663

3 жыл бұрын

@@CarpioTheOnlyOne They are being supportive... I am just hoping that I have the problems so others dont need to go through these problems ! but at times it makes me unpopular with the dealers !

I think we all jumped a bit when Tyler prised the bird loose.

Hi 🙋‍♂️ is it ok 👌 or some other problems with Defender. 🙏 🙏.

@L663

3 жыл бұрын

There is a problem programming the new Activity key to the car !

@mvirdi2333

3 жыл бұрын

@@L663 Thanks 🙏

You guys should rather try upgrading to the 2018+ headlights and front bumper. I've seen many people do it in the forums, ect. Very possible

@L663

3 жыл бұрын

I think the plan is to do the simple SVR upgrade first - as this looks super easy - then after that we will do the full 2018 SVR upgrade !

Do I have to replace the fenders also?

@L663

Жыл бұрын

Not to fit the bumper - but if you want the SVR side vents you need to change the fenders ( we call them wings in the UK )

@publicname515

Жыл бұрын

@@L663 Got it-- I don't care about the SVR side vents. So I just need the lights retrofitted. Should I buy a chinese version? I'm afraid of poor quality, I prefer OEM. But I can't find out how to use the OEM head lights with the old harness. There are no harnesses I can find online.

@L663

Жыл бұрын

@@publicname515 Sorry if you change 2013-2017 sport to SVR the bumper fits - no need to change anything id you want to fit the 2018 SVR to an early sport this is more complex. The chinese lights are not great - the ones i have tested.

Cooool wettt grasssss

Did Tyler really jump when he pulled out the dead bird?

@L663

3 жыл бұрын

Yes .... I spotted that .... as it it was going to spring to life and attack him !

What's happened to the Defender?

@milesfinch

3 жыл бұрын

He probably killed it, again, when he was playing with that remote wristband thingy the other week.

@L663

3 жыл бұрын

I took it to the dealer to have the wristband coded and its not going to plan..

@milesfinch

3 жыл бұрын

@@L663 Let's hope you don't fall out with this dealer!! ;-)

Oh... it is a lot more difficult without orange heads on my screws and bolts and no Tyler to assist!!!

Nice bird 🐦😂

@L663

3 жыл бұрын

What sort of bird was it ? RIP bird !

First 😀

@L663

3 жыл бұрын

Validated !

@roberttruman8332

3 жыл бұрын

Yippee 😀 Next goal is to but a LR, plan is to get a Disco 3 and get lots of your up grades bits and a free orange pen?

I have noticed that your cars always seem like they have been Tangoed a few times .

@L663

3 жыл бұрын

Its just our little joke - we colour the fixings to make it easier for you guys to see what we are doing - but the dealers made some interesting remarks relating to the use of our pen that was captured on the dashcam !

@mikeclark4416

3 жыл бұрын

@@L663 The Orange you paint the screws reminds me of the "Old" Wheeler Dealers " Edd uses that colour for his gloves . LOL

Juvenile Robin.

@L663

3 жыл бұрын

Thats sad ! everyone loves robins

I can't stand those two piece plastic scrivets! Great for assembly but a right pain when dismantling.

@L663

3 жыл бұрын

Yes they have advantages 1) Light weight 2) dont rust 3) quick to assemble but they can be fiddly to remove sometimes !

I know a quicker way to remove the bumper, crash it into a tree!! ;-)

@L663

3 жыл бұрын

This car has had enough crash action to last it a lifetime ! Lets be honest its had a hard life.... crashed .. bodge repaired... then taken apart by me....

This is crazy . This guy has no idea what’s he is doing . No need to remove front

@L663

9 ай бұрын

Shhh dont tell anyone !