Simple instructions to un-jam the spool head on a Walmart battery-powered Hart brand 40V weedeater.
Жүктеу.....
Пікірлер: 27
@ginamcelroy58633 ай бұрын
Mine didn’t even come with that blue tool. I have the tiller too! It’s so hard to get it to lock back on.
@brendanash40824 ай бұрын
Just bought one from Walmart and the locking and unlocked will not budget either way after being aligned up. Is there's a trick to locking and unlocking it that I might be missing. I paid $158 + taxes and only got to just use the string that came in the string housing when I bought it. Can you help me please?
@FixEverythingYourself
4 ай бұрын
Sure. This is a common problem and a bad design. Here's a video on how to open the head and modify it so that it'll be easier to open in the future. kzread.info/dash/bejne/p4KM1rGfns7bY5c.html
@FixEverythingYourself
4 ай бұрын
I replied a minute ago but don't see the response. Here's a video on how to resolve it you're keeping the weedeater. kzread.info/dash/bejne/p4KM1rGfns7bY5c.html
@stevehope6283Ай бұрын
I have a different type of head. It's a Hart 40v 4Ah. I have string stuck under the head. I've pulled the stringer off and I'm left with the shroud but I'm stuck as to what to do next. Help!
@FixEverythingYourself
Ай бұрын
This probably isn't the weedeater you have but it's a Walmart weedeater and may be the same type of head: kzread.info/dash/bejne/o4uK2cupoba4ebA.html
@stevehope6283
23 күн бұрын
@@FixEverythingYourself Thanks for getting back to me. I went to pull the motor cover off below the head to access that area but out of 6 screws 4 are stripped from the factory. I managed to get the line out with a pair of bent hemostats but it keeps getting tangled. It is from Walmart. I saw a video where it was recommended to wrap the line in the opposite direction and it did the same thing. Not sure what to try next.
@codymarsh81175 ай бұрын
Great video! Thanks🤙🤙
@FixEverythingYourself
5 ай бұрын
Thanks!
@bryansmith72385 ай бұрын
These are a pain in the ass to open.
@FixEverythingYourself
4 ай бұрын
Here's a video on how to fix it so it's easier to open in the future. Bad design, though. kzread.info/dash/bejne/p4KM1rGfns7bY5c.html
@unboxutd.50564 ай бұрын
Why is so hard to undo it
@FixEverythingYourself
4 ай бұрын
Don't know. Some are, some aren't. Some folks said they've used a little WD-40 to make it open more easily.
@FixEverythingYourself
4 ай бұрын
Here's a video on how to fix it. Take a few minutes but it's easy and is worth it if you're stuck with the weedeater.
Try this solution: kzread.info/dash/bejne/p4KM1rGfns7bY5c.html
@pkaspar78
3 ай бұрын
@@FixEverythingYourself thanks, that’s the first video I watched, unfortunately mine is completely new and it just won’t turn
@FixEverythingYourself
3 ай бұрын
You'll need to use the screwdriver technique I showed at the beginning. And if you have a helper, it's easier to do it. Unfortunately, some of these units are super difficult to open.
@pkaspar78
3 ай бұрын
@@FixEverythingYourself oh I did, but it won’t budge, and I am pretty strong.
@pkaspar78
2 ай бұрын
@@FixEverythingYourself I returned it and got another one which I was able to open.
@ambermclaughlin3852Ай бұрын
The string is not going through. Ugg
@FixEverythingYourself
Ай бұрын
Try straightening the first few inches of string. The string wants to curl up as soon as you put it into the hole, which makes it difficult to "find" the next hole on the inside. This is usually the problem with feeding the string.
Пікірлер: 27
Mine didn’t even come with that blue tool. I have the tiller too! It’s so hard to get it to lock back on.
Just bought one from Walmart and the locking and unlocked will not budget either way after being aligned up. Is there's a trick to locking and unlocking it that I might be missing. I paid $158 + taxes and only got to just use the string that came in the string housing when I bought it. Can you help me please?
@FixEverythingYourself
4 ай бұрын
Sure. This is a common problem and a bad design. Here's a video on how to open the head and modify it so that it'll be easier to open in the future. kzread.info/dash/bejne/p4KM1rGfns7bY5c.html
@FixEverythingYourself
4 ай бұрын
I replied a minute ago but don't see the response. Here's a video on how to resolve it you're keeping the weedeater. kzread.info/dash/bejne/p4KM1rGfns7bY5c.html
I have a different type of head. It's a Hart 40v 4Ah. I have string stuck under the head. I've pulled the stringer off and I'm left with the shroud but I'm stuck as to what to do next. Help!
@FixEverythingYourself
Ай бұрын
This probably isn't the weedeater you have but it's a Walmart weedeater and may be the same type of head: kzread.info/dash/bejne/o4uK2cupoba4ebA.html
@stevehope6283
23 күн бұрын
@@FixEverythingYourself Thanks for getting back to me. I went to pull the motor cover off below the head to access that area but out of 6 screws 4 are stripped from the factory. I managed to get the line out with a pair of bent hemostats but it keeps getting tangled. It is from Walmart. I saw a video where it was recommended to wrap the line in the opposite direction and it did the same thing. Not sure what to try next.
Great video! Thanks🤙🤙
@FixEverythingYourself
5 ай бұрын
Thanks!
These are a pain in the ass to open.
@FixEverythingYourself
4 ай бұрын
Here's a video on how to fix it so it's easier to open in the future. Bad design, though. kzread.info/dash/bejne/p4KM1rGfns7bY5c.html
Why is so hard to undo it
@FixEverythingYourself
4 ай бұрын
Don't know. Some are, some aren't. Some folks said they've used a little WD-40 to make it open more easily.
@FixEverythingYourself
4 ай бұрын
Here's a video on how to fix it. Take a few minutes but it's easy and is worth it if you're stuck with the weedeater.
Mine won’t move at all so I guess
@FixEverythingYourself
2 ай бұрын
Try this: kzread.info/dash/bejne/p4KM1rGfns7bY5c.html
Mine won’t move , it’s really tight 😢
@FixEverythingYourself
3 ай бұрын
Try this solution: kzread.info/dash/bejne/p4KM1rGfns7bY5c.html
@pkaspar78
3 ай бұрын
@@FixEverythingYourself thanks, that’s the first video I watched, unfortunately mine is completely new and it just won’t turn
@FixEverythingYourself
3 ай бұрын
You'll need to use the screwdriver technique I showed at the beginning. And if you have a helper, it's easier to do it. Unfortunately, some of these units are super difficult to open.
@pkaspar78
3 ай бұрын
@@FixEverythingYourself oh I did, but it won’t budge, and I am pretty strong.
@pkaspar78
2 ай бұрын
@@FixEverythingYourself I returned it and got another one which I was able to open.
The string is not going through. Ugg
@FixEverythingYourself
Ай бұрын
Try straightening the first few inches of string. The string wants to curl up as soon as you put it into the hole, which makes it difficult to "find" the next hole on the inside. This is usually the problem with feeding the string.
this is bullshit mine won't move period
@FixEverythingYourself
2 ай бұрын
Solution: kzread.info/dash/bejne/p4KM1rGfns7bY5c.html