How to Remove Fuel Injectors Saab 9-3 | B207 Petrol engine
Автокөліктер мен көлік құралдары
Do you want to clean your fuel injectors? Or performing a Saab 9-3 B207R injector upgrade? Let me show you how to remove fuel injectors Saab 9-3 B207 petrol engine (4 cylinder Ecotec).
👉 How to clean fuel injectors yourself: • 🛁 How to Clean fuel In...
☕ Support the channel here: www.buymeacoffee.com/CycloneCyd ☕
💡 Subscribe and hit that bell 🔔 to learn more about looking after your car.
Injector cleaning kit (as seen in my injector cleaning video above)
WW 🌍 s.click.aliexpress.com/e/_98RoWp
Injector filter basket removal tool (make the job easy)
WW 🌍 s.click.aliexpress.com/e/_AODA61
3 in One penetrating oil (highly recommended)
UK 🇬🇧 amzn.to/3DWhy8W
USA 🇺🇸 amzn.to/37yxnqi
Air intake & carburettor cleaner
UK 🇬🇧 amzn.to/3JF9zOV (Wynn’s - my favourite)
USA 🇺🇸 amzn.to/3uq4GVi (CRC - popular in the US)
Variety of magnetic pickups, I have the one with the light 👍
WW 🌍 s.click.aliexpress.com/e/_9ibiVf
A very useful matching inspection mirror with light 🔦
WW 🌍 s.click.aliexpress.com/e/_9g9TA9
A small tub of petroleum jelly is an essential in every tool kit❗
WW 🌍 s.click.aliexpress.com/e/_9iKNYZ
Buy your Saab 9-3 silicone top hose here (worldwide shipping available):
WW 🌍 www.buymeacoffee.com/CycloneC...
☠ BMAC only takes credit cards, no Debit cards. If you prefer the buyer protection of Paypal G&S or wish to use a debit card, email me your name, address, colour choice & phone number (for last-mile courier) and I'll email you a Paypal invoice. 👈👈
Learn more about looking after your car:
🎥 How to replace a CV [constant velocity] joint boot with a split kit: • Universal CV Boot Repa...
🎥 Don’t let your fuel filter end up like this 100,000-mile old example:
• Why Should I Change My...
🎥 Battery & alternator care in this playlist: • Alternator and battery...
Everyone should have a tyre pressure gauge in their glovebox:
bit.ly/Tyre_press_guage
bit.ly/Pressure_Gauge_2
I personally prefer a stirrup pump to a foot pump (I use the same one for my bikes and cars)
bit.ly/Tyre_stirrup_pump
Are you trying to grow your own KZread channel? I use TubeBuddy, try it out for FREE:
www.Tubebuddy.com/CycloneCyd
Gear I use in filming and production:
bit.ly/CC_Gear
My videos are edited with Filmora X - try it for free
bit.ly/Filmora_X_try4free
Thank you
Think outside the box, easy DIY,How to remove fuel injectors saab 9-3,how to remove saab 9-3 2.0t injectors,how to remove saab 9-3 2.0t injector,saab 9-3 2.0t injector removal,saab 9-3 b207 injector replacement,saab 9-3 fuel injector replacement,saab 9-3 injector removal,how to remove injectors saab 9-3,b207 petrol engine,saab b207,saab b207r injector upgrade,cyclone cyd saab,saab b207r,saab 9-3 b207,saab 9-3 b207r,clean your fuel injectors
Пікірлер: 55
👉 How to clean fuel injectors yourself: kzread.info/dash/bejne/aqZ8z7BrcabFnc4.html
What a helpful video! Straight to the point and well edited to remove all the stuff we don't need to see. My 2006 Saab convertible now runs really smoothly with no more ECU warnings after you showed me how to unplug those big ECU connectors so I could douse them in contact cleaner. And in proper English too 😀 Thanks!
Cyd, thanks for all your hard work with the Saab videos. I know any time I search KZread for DIY 9-3 content, your channel is always the first source I check!
@CycloneCyd
2 жыл бұрын
I appreciate that, I really do. After being thrown under the covid bus by JLR, ad revenue and coffees are how I make a living now. So, it's truly gratifying to know my videos are genuinely helping people.
@alexandredionisio9280
2 жыл бұрын
@rails Indeed.
Legend of a man. Just completed PCV replacement, injector cleaning and injector seal rebuild. Went butter smooth due to all of it being superbly covered and explained by Cyclone Cyd. Thank you!
Amazing video. We lost our local saab expert in Ireland a few weeks back and your videos give me confidence to start doing this myself. A true delight. Ps you seem like a gentleman, I could listen to you chat next to a fire and a pint in the hand!
@CycloneCyd
2 жыл бұрын
You can do it! For some reason your comment remonded me of Owd Betts (www.google.co.uk/maps/place/Owd+Betts/@53.6387658,-2.2637502,17z/data=!3m1!5s0x487bbcbb451f832f:0xcad821dd841f164a!4m5!3m4!1s0x487bbb8c083d2573:0x65432a3c842e29f3!8m2!3d53.6406295!4d-2.2590939?hl=en-GB) it's 35 years since I've been there!
Excellent explanation, thanks! Was looking all over KZread for a video like this 😂👍🏼
@CycloneCyd
2 жыл бұрын
I think you posted on a FB forum about that.
Great timing! I might not have the space to work on my own car here soon but the videos can still be helpful! Thanks Cyd def want to see the intake manifold come off too
Much easier than others. Thanks Cyd, for encouragement to fix my 2008 9-3 BioPower myself 👍
@CycloneCyd
2 жыл бұрын
I appreciate that, I really do. After being thrown under the covid bus by JLR, ad revenue and coffees are how I make a living now. So, it's truly gratifying to know my videos are genuinely helping people.
Nice too see your keeping Saab going,I do miss mine it drove lovely.
@CycloneCyd
2 жыл бұрын
That's the plan! Spending big money on maintenance this year.
Thank you cyd! Very helpful!
@CycloneCyd
2 жыл бұрын
Glad to hear!
thanks for the video, very useful! 🇺🇦
Thanks pal,I got 1 of those magnetic trays from ebay, keeps all the bits in while working on that part
@CycloneCyd
Жыл бұрын
You're welcome Phil.
Just did a cold, dry compression test on each of the cylinders in my b207r. The numbers in PSI: 80, 180, 120, 205. I believe I have a severe issue. Just replaces the engine chains, and I reckon I'm looking for an even higher price. Doing this job seems no joke.
@CycloneCyd
Жыл бұрын
That's not too good, but neither is it that bad. Mine is down to 40psi on 2 cylinders and 70-80 on the other two. Starts real rough on these -5C mornings.
Im also using libre on my arm for my type. 1 diabetes. I also drive a saab 2.0T 😅 great videos! Cheers from 🇸🇪
@CycloneCyd
2 жыл бұрын
Yeah, the Libre 2 is great. We can get them on the NHS now.
@robertlundholm8156
2 жыл бұрын
@@CycloneCyd thats great! 👍 Getting the libre was a total game changer for me.
What if I only need to change the fuel regulator? It’s already exposed, so do I just remove the pin and just pull it out, then swap? Or is their more too it ?
Love this video. But i got a question: my engine have kinda high vibration, and Ive got P0300 going rly bad when i start but 15-20sec its calm down but the vibration is kinda high. Have changed sparkplugs, hats and alot, please any tips? *Same engine as you*
💐
Am looking to get a Saab 93 2.0T convertible next year to do a Euro trip. On some youtube videos about Saabs I've heard that the location of where the ECU is located on the petrol Saabs, it can cause the ECU to overheat. Driving around Euro with outside temps reaching upto 35c-40c, do you think the ECU might cause problems ?
Soo are there specific fuel injectors needed for a Saab 9:3 turbo? Or are most fuel injectors universal?
Very nice and detailed explanation job. I've watched your cabin fan and windscreen washer videos and fixed mine. Just wondered you done any aircon jobs on a SAAB 93 . I've replaced the drier and condenser 4 years ago by a local garage. It worked 3 years perfect cooling as you've turned it on. It worked before last years MOT, but failed immediately afterwards. I did question it with the MOT garage and they just said it failed and shouldn't be caused by the MOT tests! I've checked all the pipe works visually, but couldn't find any obvious reasons . Any ideas to check it without specialist equipment . I've checked the magnetic pump pulley by disconnected the wire to it and saw the pump pulley disengaged !
@CycloneCyd
2 жыл бұрын
Check the valves on the hi and lo side. One of mine came loose and I lost the gas. Tightened it back up (same as a tyre valve), regassed and fine since. Also check the condensor, it may have been holed by a stone.
Really useful video. I am upgrading my injectors to 630cc Bosch Dekas and there are really very few videos about. You are the go to for this kind of stuff for me even though my 2.0 aero is heavily modded! would a light silicone lubricant work for the injector o rings as well?
@CycloneCyd
Жыл бұрын
Yeah, a bit of spray silicone lube would be fine (even a drop of WD would do!) It's just so the o-ring slides in easily and doesn't "drag" which might damage it. I've got a set of Dekas too, but not fitted. Not sure I'll ever need them so I may sell them. Did you find a rebuild kit for them?
Brilliant bit of work Cyd. You made it look effortless. Can you tell me where I can get a set of four injectors for my 2008 Saab 9.3 2.0 T, and roughly the cost?
@CycloneCyd
Жыл бұрын
Try either Neo brothers or Ron facebook.com/ron.doodle.52
i've recently bought a 04 saab 93 2.0t. i hasn't run in 8yrs. The key turns but doesn't do anything when you go to start the car. Dash comes on and abs light on. i jumped starter and can get car to run off of starter fluid. but i am not getting injector pulse. please help !!
Thank you so much for the video sir. Where can one buy fuel injector rebuild kit?
@CycloneCyd
Жыл бұрын
sorry I didn't see this sooner. www.buymeacoffee.com/CycloneCyd/e/79386
İyigünler lütfen bu videoya Türkçe altyazı özelliği eklermisiniz teşekkürler 👍😎👍
Ahh yes... I already got a kit with o-rings and such ready to be used, and I don't have the ECU in that place anymore. As for the air intake manifold, last year I did the PCV change, it was totally shot. The instructions on Saab WIS were clear enough although not very efficient like you did. Also... does a counter thread drill bit and a magnet inside the 4th cylinder increase my horse power? 😆🤣 Long story short... dumb mistake after a compression test which was between 13-13,5bar. All this because the last mechanic, when I had him do a full "chains and guide" job, gave me back my precious with a rough engine mostly when idling, and I was trying to trouble shoot the problem myself. The "new" mechanic looks competent and I'll have him also clean the valves and pistons, as I noticed that they were so dirty that I could almost plant potatoes on top of them. Btw, as I've been doing for all O-rings and seals I change, I'll get Viton copies later on (this time).
@CycloneCyd
2 жыл бұрын
Are your injectors Denso like mine? If yes, where did you get the service kit? I'm looking for one.
@alexandredionisio9280
2 жыл бұрын
Update: this mechanic will fine tune the engine, give it a clean and he also told me about the turbo which has a bit of axial play, so its going to get its first service since its creation 12-2003.
@alexandredionisio9280
2 жыл бұрын
@@CycloneCyd I was going to ask you if you got the kit, but it seams that my reply disappeared. So... it's the MAHLE GS33528
Is there an O-ring where the fuel supply lines meet the fuel rail? Mine does not appear to have any, it is just metal on metal.
@BlakeJay
Жыл бұрын
Ohh never mind, they are hiding under the metal at the top of the fuel rail connection. One is black one is green. It appears to be part of the fuel rail so not replaceable.
Hi, Bought your o-ring kit for a Saab B207 over a month ago. When will it be shipped? Cant find your contact information hence why I text you here
Cyd, won't there still be residual pressure in the fuel system? Would you need to bleed it off before starting this procedure? Also, is there a specific reason for making sure ignition is not only off but key is out?...is it to prevent damage to ignition or prevent bodily injury? Thx for this excellent step by step 👍
@bluedogtransportwa
2 жыл бұрын
car will lose its shit when you disconnect the ECU
@CycloneCyd
2 жыл бұрын
The fuel pump might run when you have the key in. I show releasing fuel pressure from the line not far from the beginning
Hello, Why do you have a battery connected ?? I will replace the injectors soon, and I need now.
@CycloneCyd
Жыл бұрын
Do you mean why not disconnect the main battery? There is no need, but do so if you feel more comfortable doing so.
@ZakuZak
Жыл бұрын
@@CycloneCyd OK. thx you.. soon I started change fuel injectors.. 👌👍
Are upgrades useful at all with just a stage 1 tune? Any good recommendations?
@CycloneCyd
Жыл бұрын
On a 9-3, get rid of the snorkel to the front of the car so the airbox breathes in from the wheelarch. Move the IC to the front. otherwise just keep it clean and in tip top.