Man, I can’t wait. Sticker has been staring at me for 13 years. Great vid.

@Ozzy62863

4 жыл бұрын

adaptiveagile was there any paint fade after taking it off? Like a noticeable difference from the paint that was under the sticker vs the paint that has been exposed to the sun and elements for 13 years?

@snubz6188

3 жыл бұрын

@@Ozzy62863 mine had a paint fade only after 600 miles

@Ozzy62863

3 жыл бұрын

@@snubz6188 what color paint from what bike

@snubz6188

3 жыл бұрын

@@Ozzy62863 it’s a Honda grom and it was on the gas tank cover so they grayish textured plastics

Removing these stickers increases 30 hp .

@millerstetson4330

3 жыл бұрын

i realize it's pretty randomly asking but do anyone know a good site to watch new series online?

@willpaxton9179

3 жыл бұрын

@Miller Stetson i watch on Flixzone. Just google for it :)

@joaquinluka3997

3 жыл бұрын

@Miller Stetson i watch on Flixzone. You can find it by googling =)

@Nine6teen

2 жыл бұрын

Lol

I just love this warning stickers... Read manuals before use... Do not open... Do not eat... Do not put yourself in microwave...

@seekter-kafa

Жыл бұрын

well, that all came from USA, maybe people really are more dumb than the rest of us, lol... i am kidding, it's because people sued manufacturers there for everything possible and now we have to fight with ugly stickers, like it is not enough to put it on in manual and just stick one sticker -read the manual before operating (when i was a kid i think that was the only kind, not sure though

@NextGenNative

2 ай бұрын

I literally pulled my bike out and left it in my driveway for an hour came outside and easy no more sticker peeled right off

you can always put those stickers on some kind of card and keep it in the trunk of the bike for reference..

@danielgreen5803

7 жыл бұрын

What is a trunk of a bike and where can i find one

@Lancaster604

7 жыл бұрын

The tiny compartment on the passenger seat which is too small to even fit your shades.

@PANTYEATR1

7 жыл бұрын

dave kahn i ride a 2000 CBR 929 and under the passenger i have plenty of room, so it's a trunk for me. i even have a power commander in there and still have room for all types of things...

@Quinney84

7 жыл бұрын

PANTYEATR1 my old fzr hade room for a sandwich, choco bar and red bull, tip: if a can gets punctured and drips over your rear caliper do not panick and think its a leak in brake and spend a whole day trying to fix it 😂

@MoFe12345

3 жыл бұрын

I have an RSV4 and can barely fit my registration paper under the rear seat, let alone anything else

Very helpful as i've been nervous about damaging the paintwork. Great series of videos

Ari and Zack is my fav, they're funny yet reliable in bike test, review, etc. keep on guys!

I found this video looking for a way to take the warning sticker off my KitchenAid Artisan mixer and it worked like a dream. It looks gorgeous from all angles now. Thanks!

Thanks for the tip! You guys should do a video on how to best set rebound and compression damping!

your guys are amazing! I learned so much on the channel. thank you for the information. I can't wait to fix my svs 650 my brother left me.. if I ever get it running I will share a photo with you guys for helping me out. thanks MC garage!

Great tip, i was able to remove my warning stickers from my new Yamaha R3, keep making more helpful tips from the MC Garage.

Great video! I’ve been using this for years and it works everything I’ve tried it on. 👍

Funny. Just searched for "removing warning stickers motorcycle" and this popped up. I just bought a 2020 Aprlia Tuono Factory 1100. Italians LOVE warning stickers! Thanks for the vid!

Awesome thanks for the info. I forgot I even had a heatgun lol. I’ve just bought a secondhand bike that’s 4 years old so hope it still comes off as easy

Just used it on my Motorcycle, and it worked beautifuly!

Could've used this tip a week ago, Ari. =) Otherwise, excellent tips and I used them successfully. Something else for those who are about to try this, keep a bottle of rubbing alcohol handy. The glue on my FZ07 didn't wanna go away, even after multiple applications of WD40. It left these invisible glue strips that as you ride, attracts and accumulates dust onto it turning it dark so you get this blackish smudge. One wipe down with rubbing alcohol and bye bye glue goo.

Worked like a charm for me! Thank you :)

Worked like a charm on my new Moto Guzzi, thanks for vid!

I really hope this means that we are gonna get a video on the new RSV4!

The tutorial I've been looking for my entire life

I carefully removed my warning labels and slapped them underneath the seat and inside the top case, I didn't throw them away. Since the plastic is new, it's clean and adhesive from the labels has no trouble sticking properly and they're out of sight so the bike instantly looks better. I didn't remove the VIN label located on the frame, but I did try removing the noise level compliance label from the swingarm (one of three labels on it; the other two being chain slack & tire pressure labels) and simply couldn't. It's not a regular sticker, it's a fragile one-time sticker covered with protective foil so I removed the foil and realized I'd have to destroy the last label in order to take it off, I couldn't peel it off in one piece so I left it there. I may go back to it with a hair dryer though, just to see if it's possible. Thanks for the tip. ;)

I like this series, keep it up guys : )

Very nice bike!!! Great video, thanks!!!

Hi Chris, considering the fact that my "Mothertongue" is Swiss my reply to You was rather good. And of course You have figured out just what I wanted to say. "Patience"! Patience is a virtue! Have a GR8 day Chris. Regards from Africa.

U Just made my life simpler with this tip 🙌

I was about to start tearing the stickers off my mto7 on a 50 degree night lol. Thanks for the video guys! Think ill wait

Really good video

hii mc..... the most pro rider...... nice explanation. ..keep it up .....

Thanks Sir.. you rock..

thanks man..MC garage 👍👍

good info to have

An automotive bug and tar remover like the ones from Turtle Wax or Meguiars is also a safe solvent for removing any left over sticker gum from the paint.

Good info. Those tank stickers need to go!😄👍🏽

Now the Queen is perfect!

I’m happy to say the 2022’s didn’t come with any of the “notice” or “warning” stickers. I have a 2022 650 and none of these are on it. However it does say in the owners manual DO NOT drink antifreeze coolant.

@leroyjenkins4123

Жыл бұрын

KLR 650?

Awesome video!!.. hey does this apply to the 2022 Honda cbr500r? I think I saw a video saying that the clear coat was sprayed over the tank stickers, and when you remove them you can see the outline of where the sticker was , does anybody know if this is true? Thanks

"Also works on any stickers you've put on yourself." I see what you did there. :-D That was a fun one. RSV4 certainly is pretty! Way out of my league, but it doesn't hurt to look, right?

I tried this heat gun thing, but the stickers bubbled up with the paint. So, I used a hammer to pound the paint bubbles back down. That didn't work really well, so I whipped out my angle grinder, and smoothed the area out somewhat. It still didn't look good, so I covered the area up with some duct tape.

@aloisius4188

4 жыл бұрын

Trial and error brought you a workable solution. Good for you, you tree.

That motorcycle indeed look fabulous

goddamn goated. thank you so much for this video

I did heatgun yesterday and the glue stayed there, i tried spraying with presure water it was mostly gone but it was still visible and kinda sticky. I came on youtube saw you made a video and i knew i could trust, i saw WD-40 paused went to try took 10secs and it was gone for all stickers 👍👍👍

@aloisius4188

4 жыл бұрын

The value of these short but informational videos is beyond measurable.

bless you

can you do a video on removing the logos, graphics and other, bigger labels?

Gracias

Just bought Yamaha chrome engine guards that came with a warning label. I watched this video plus several others. Don't know what Yamaha uses for adhesive, but none of the tips worked. Had to use a razor blade. "Goo Gone" worked great to get rid of the sticky residue.

Nice Video, small thing but really helpful. And now after watching the sticker on your head and t-shirt i cant stop laughing

Nice job! I take the badges off my cars because who needs to advertise? Also, I chuckled at 1:13

One issue you didn't cover: labels on metal parts like the swing arm. The metal wicks heat away from the label quickly and makes removal a chore. I've owned 2 RSV4s and encountered this both times. Any tips?

Here is a suggestion do a how to on retuning the suspension on the fz-09.

make a how to video to change spank boar for motorcycle.. thank you mc garage.

You can also use petrol to remove adhesive.

What about front brake reflectors. Just put bolt and any other hardware back in? 2022r1

I don't even notice the one on my bike, my other bike, I think the previous owner removed it, well I'm probably positive that it's not there? Not sure hehehe However, three stickers on the Aprilia? That indeed needs to go! I might remove mine if I started to notice it more because of this video though.

please do a video on helmet nd bike carbon wrap

Hey MC Garage, I just noticed with my bike that my overflow tube that's connected to the carburetor got burned. I think it's touching the exhaust tube. Should I be worried?

I have a bit of a challenge removing the warning sticker from my R750’s tank. It’s very beat up after some odd 20 years. I live in a highrise, where I have no access to a hairdryer or any other electric device or heating tool. Is there a way to remove stickers without heating them up? Some type of chemical that can dissolve the sticker without harming the paint? Goo Gone? WD-40? Any ideas? Much obliged!

1:13 lOOOOOOOl

Hey Ari, I did just like you showed me in the video. It worked quite well, but I can still see and feel that there's just a tiny bit left after my best effort of removing it. Do you have a great tip?

@aloisius4188

4 жыл бұрын

A dab of varsol or paint thinner on a paper towel, and a wipe with alcohol.

Lighter fluid, Goo Gone, and WD-40 were all a fail at removing the sticker residue from my 2022 Tenere 700. Goof Off was the solution. It immediately removed the adhesive without any damage to the paint.

I hate the chain slack and the tire pressure but still kept them because I'll need them...

I know this is an old video, but I have a 2022 and the stickers were placed on black plastic. Will wd40 work on plastic as well or will it leave a marks?

Will this work with a tank pad?

I just took my swing arm sticker off and it was a pain in the butt. Took like an hour. It only scratches it only in one little spot and you can only see it in full sun light. I took all my stickers off and laminated them so I could save them. Only one of the swing arm sticker ripped. Luckily before a took it off I took a picture of it and I printed it out and saved it. Looks much better with them removed.

Hi guys does the same apply to matte paint?

Does this work for helmets? ex. Schuberth C3 Pro removing the logo sticker

I think the sunny day is a good idea. It adds needed amby ance.

@aloisius4188

4 жыл бұрын

Ambience !

@gregormiller4037

4 жыл бұрын

@@aloisius4188 Eggz Ackley!

Does this work with satin or Matt paint?

maaaan i need that bike

Will it work if the decal has been on there for 20 years?

Would this method work on factory MC helmet decals as well?

@anxiousappliance

2 ай бұрын

no

I use the motorcycle magazine pages as a rag

Would this be the best technique for removing factory stickers from a helmet? Shoei gave me a lovely sticker to tell me the weight.....

I know on Ducatis, if you're having warranty work done and Ducati asks the dealer for photo evidence and the stickers aren't there, they can deny the repair. I don't know this empirically, I was just told. Anyway, the tech told me if I'm going to remove them, get them off in one piece and hang on to them just in case.

Nice Touch @1:13

When they are baked on for a long time, they get real nasty to remove! I really have had good look with Goo-B-Gone, that is brilliant after heat gun and scraper, I'm still not used to seeing no Dreadlocks though!

@aloisius4188

4 жыл бұрын

Everyone likes to use Goo-Gone or WD40. I use a little bit of varsol on a paper towel, quicker and thorough, followed by a wipe with rubbing alcohol.

@Kingsoupturbo

4 жыл бұрын

@@aloisius4188 I'll have to give that a try!

Thanks for the video i was going to use a chisel

there was a stikker on my scooty mitre how i remove it,

Before I saw this video I successfully removed my stickers using the hairdryer/wd-40 method - however the "emissions" sticker is GALVANIZED to my swing arm...Ive got it half scraped off and want it gone...but why in the video above does it say we don't want that one removed???? Also I put all the removed stickers in the cover of my owners manual. :)

@KlingonCaptain

5 жыл бұрын

It depends on where you live. In some states you won't pass inspection without it.

how determine tyre pressure if we replace upsized tyre with stock one

@exeroo9728

7 жыл бұрын

naveen singh it says on the tire what it can handle. somewhere between what the tire can handle and what the manufacture says :).

Remove left-over glue on the bike from the stickers with the sticky side of scotch tape. You might need a couple of short length of tape and a little patients. It never fails.

Some people like these stickers. Preserves the original factory look of the bike.

@evergreengunnut1621

7 жыл бұрын

Uhm no.

@criticalmass181

7 жыл бұрын

Yeah...The after market stuff would be a definite, for removal. The originals i'll always leave on. My bike, now, is the only one that's actually come with the warning, and fuel stickers still on. It's only just had its first service, and i'm stoked. It's got GYTR slip ons, but that's all. There's just something, for me, about it being genuine. Maybe a quick shifter, and some short levers (only because the originals won't allow much change in angle), and that'll be it. I'm pragmatic, also....but it's because the bike is beyond my skill level, these days, not because I want to keep it's resale value high. Why would I bother with a remap, and the likes, if I can't get the thing past 11,000 revs? 2013 R1, in case you're wondering.......

@Quinney84

7 жыл бұрын

Marty Smith i live in england and a new bike always needs a re map to make it run to its full smooth potential, some bike are worse than others (MV Augusta is almost un ridable in town) but because of European emmissions regulation manufacturers are having to make the bike run lean in areas of the emissions test so your power and torque curves dip and rise (not fun on a 190bhp bike) so usually another map is put in to correct the fuelling so a 2 constant curves on that dyno. map changes can make a huge difference in your bikes overall ride and power... not bad in the time it takes to drink some tea.

@bertraminc9412

7 жыл бұрын

something1random23 why does KZread only put numbers on the thumbs up! Manipulate much, you tube?

@D.J.ZAPELO

6 жыл бұрын

My are allso still on, like @something1random23 said.

how can i remove rim stickers?

what did you use for cleaning the glue?

@tommy605

7 жыл бұрын

Looked like WD40, no?

Can you please make a video on how to remove the yellow stains in an old motorcycle screen (fairing)? Thanks in advance...

@exeroo9728

7 жыл бұрын

Ant V buy a new one. they are sun damaged and cant be fixed unless polished away. THAT IS ALOT OF WORK TRUST ME

@aloisius4188

4 жыл бұрын

@@exeroo9728 You got that right Exeroo. Ant should buy a new one. But... if you've got the time, like during this isolation time (April 2020) then get the right product and buff the yellow dull ness right off there. kzread.info/dash/bejne/q6xll6hvkpPTeco.html

@exeroo9728

4 жыл бұрын

@@aloisius4188 true, fuck corona

When I saw that tag on the microfiber towel, part of me died inside. Never ever keep 'em, always rip them off!!!!

@alexwotherspoon5630

6 жыл бұрын

faisal3398 😂👍

Goo Gone destroyed the gloss on the rear fender plastic of my brand new crf300l. Thanks.👍🏻

I wish I had seen this video 2 damn months ago

Trying to buy a 2013 triumph street triple private sale in California and the first owner of the bike removed the US federal safety label. Evidently, the bike has to be inspected and have this label in Cali. Anyone have any experience with this?

@aloisius4188

4 жыл бұрын

Call your California DMV. Don't ask us in the far flung corners of the world.

I use kitchen oil, it does a good job and it is really cheap

the ones on my new dirtbike plastics aren't coming off at all :(

Just wish I'd seen this before getting the angle grinder out.

Any tips on how to remove a sticker that's 10 years old?

I'm literally trying to remove the same exact decals on my Tuono, haha. The one's on plastic come off easy, the one's on painted metal, not so much. And what's with the damn decal on the INSIDE of the windscreen?!! Do we have to remove it to get to it?

@aloisius4188

4 жыл бұрын

Heat on plexiglas will also work, but be very very gentle with the heat. Patience is your friend in that instance.

I was searching for how to remove sticker from bike and now after watching your video I want to know how to remove it from your forehead 😅😂😂😂

You ain't kidding...the RSV4 is so sezzy. :-D

@mrsneakyburt6305

8 жыл бұрын

And to hear the orgasmic sound it makes search for Aprilia RSV4 SC project exhaust

@darksorceresszyra9467

8 жыл бұрын

Indeed! Ahem (Wipes drool off of the floor)

This is all fine and dandy but what about for a bike that’s 15 years old

Where on my body should i put the rest of the stickers thoo?

👍👍

I did this but mine just break as I peal them. They have been in the bike 9 years

Are these required to pass indpections?

@aloisius4188

4 жыл бұрын

NO !

This method is good for stickers meant to take off but no good on stickers that just won’t come off