The beast pulls a stuck seastpost out with a massive bang, must watch.
Жүктеу.....
Пікірлер: 65
@actonblue2012 Жыл бұрын
I love your absolute joy when you freed the post. Top stuff.
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, Was totally gobsmacked, and thrilled at the same time
@ScrubsIsee Жыл бұрын
Always a joy to watch… Thanks for the great entertainment!!!
@TheYorkshireBikeMechanic
11 ай бұрын
thanks for watching and your comments
@karlgardiner Жыл бұрын
Fantastic job Dave - just like you did the other day on my Genesis Croix de fer - thanks again
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, Thanks for watching, good to see you the other day, glad we got it sorted
@stephenfranks1193 Жыл бұрын
top work again there dave more videos please love watching the master at work 👍
@TheYorkshireBikeMechanic
Жыл бұрын
Thank you
@AndrewBroadbent-dr8wb6 ай бұрын
Really like your design, excellent idea. Thank you.
@TheYorkshireBikeMechanic
4 ай бұрын
Thanks for watching and your comments
@irenedunne352 Жыл бұрын
i had a good stuck seat post and i mean stuck took it to a few bike shop around 3 of them and each time the seat post was getting damaged good style twisted bent none of them could get it out of frame so got it back home sat there looking at it for an hour and ping! in my head i oiled it drill a hole right thru post for the largest screw drive i could find and put it right thru the holes and turn it one way and the other while lifting it and wow came out easy the bike was a specialized rock hopper alloy
@TheYorkshireBikeMechanic
Жыл бұрын
Nice one, well done.
@MrDazP1adv3ntures Жыл бұрын
Very entertaining and informative YBM. I was cycling up near Tuel lane tuther day and thought about passing by your workshop to say hello but it had gone past 6pm. But I guess there's always going to be another time 👍
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments, call in anytime
@zygmuntthecacaokakistocrat6589 Жыл бұрын
You should put a strain gauge or industrial scale on it to see how much pulling force is required, and keep a league table! Winner gets a new seatpost 😁
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments, Ive often thought of that , might do ot one day
@stevehamilton3181 Жыл бұрын
When working on my Japanese cars I always loved the short, sharp crack when a bolt initially releases. Don’t forget the goggles when using the powered brush….
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments
@SingletrackScene Жыл бұрын
I'd love to experience one of these cracks in person! So satisfying! well done!
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments, you would be welcome to attend
@Sooperhans3636 Жыл бұрын
Amazing and satisfying sound!
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and your comment
@hookerjl1 Жыл бұрын
Really nice one…I share your satisfaction of getting the seatpost out👍🏻😎it really is the hardest and my first part when stripping parts on a bicycle😅
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments
@hookerjl1
Жыл бұрын
@@TheYorkshireBikeMechanic You’re welcome🙂
@davidrogers713710 ай бұрын
I’m at a last resort stage with a trek 520 steel frame aluminum post. But I’m nowhere near Yorkshire. Plus the waiver makes me nervous, though I understand it. Wondering what your thoughts may be on using gallium to “melt” the aluminum out.
@TheYorkshireBikeMechanic
10 ай бұрын
Hi, Thanks for watching. I would not like to comment, sorry
@bobwilliamson5574 Жыл бұрын
Pedal threads can seize up in the crank arms too , good idea to take them out and Grease regularly.
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and your comment
@BeatzByBen4 ай бұрын
Man I wish I lived near you do get this done. Exact same post on my 1976 bianchi. Can’t get it out for the life of me
@TheYorkshireBikeMechanic
4 ай бұрын
Hi, thanks for watching and your comments, sorry!
@lambertclaassen8412 Жыл бұрын
Nice work
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments
@SproutyPottedPlant Жыл бұрын
Would you say that’s the loudest sound in cycling? Would a 60 psi tyre pop be quieter or louder than that!? I always think about my 60 psi kick scooter tyres, what if they pop? Would it result in hearing loss?
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments, a tubeless road tyre is the worst
@ScrubsIsee11 ай бұрын
Hi, can you tell us, what the black collars are from/made of? Are these custom made?
@TheYorkshireBikeMechanic
11 ай бұрын
Hi, Thanks for watching, They are made of steel, they are off the shelf but are turned by me to make them the right diameter for each seat post, www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313&_nkw=split+collars&_sacat=0
@captaincoxyboy6 ай бұрын
Brilliant 👍👍👍
@TheYorkshireBikeMechanic
6 ай бұрын
Thank you
@oreocarlton3343 Жыл бұрын
Do you use heat cold combos or only heat to unstuck it?
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, Thanks for watching and your comment, just heat
@macducati2304 Жыл бұрын
Well done!
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments
@islandaerial3414 Жыл бұрын
Hey Dave. I had to purchase a Bosch Gen 2 DU because, Bosch wouldn't warranty their POC after just 5600km I did manage to get a warranty (so they tell me) and the return of the replaced DU. Would you be interested in having a look at it and 'taking it to bits'? It failed with the typical 500 error code. Bearings feel fine Let me know and I'll send it to you 🖐
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments, I have one or 2 of gen 2s about so Im ok thats but thank you for your offer.
@soundwave6769 Жыл бұрын
can you get shitmano motors from madison ? local ebike shop said they dont sell them but i want a ep8 to replace a out of warranty e8000 can it be done?
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, shimano only supply replacements but the ep8 will nopt fit in a bike that was e8000 equipped
@soundwave6769
Жыл бұрын
@@TheYorkshireBikeMechanic hi when you mean replacments i take it thats warranty only so out of warranty madison will not sell any motors to any dealers ?
@belperbikes2120 Жыл бұрын
Have you moved to new premises Dave?
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, Yes we are now in a high street shop.
@mi16chap Жыл бұрын
What did you say at 8 minutes... another round tousler?!! 😂🤣
@TheYorkshireBikeMechanic
Жыл бұрын
Hi Andrew, lol, I said "another ram tousler", its not a real word but the phrase that is used by snooker ace joe johnson when he commentates on a snooker match.
@mi16chap
Жыл бұрын
Haha love it, going to start dropping that into some work conversations 😜
@PrinceDiwa-jq1sn27 күн бұрын
What's name of machine
@TheYorkshireBikeMechanic
21 күн бұрын
Its called the beast and its our design
@TC-hl1ws Жыл бұрын
Well done! I guess the only question I have is exactly how long is a "Donkey's Years".
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments, It's anyones guess, lol
@wojciechturek1601 Жыл бұрын
I gd a similar case on one of the bikes I found on scrap and could not handle it But no tools just human power I didn’t try to heat it up It was alu cannondale cad 2 and alu seatpost Think someone had to stick oversized post on it 🤣 My female friend made on this bike return trip to Edinburgh and back to Glasgow and the seat post was down to lowest position frame i would say 16inch size rather small 😉🤣🤣🤣🤣
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments
@iTCXtreme Жыл бұрын
👏👏👏😊👍
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments
@jhgktyg Жыл бұрын
Dave good work, great videos couple of ideas for you. have you ever tried penetrating oil applied 24hrs prior? Twisting the seatpost with a long wrench while pulling?
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments, the beast is a last resort after all thats tried
@Casualfulltime Жыл бұрын
You should wear safety glasses
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments, might be a good idea.
Пікірлер: 65
I love your absolute joy when you freed the post. Top stuff.
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, Was totally gobsmacked, and thrilled at the same time
Always a joy to watch… Thanks for the great entertainment!!!
@TheYorkshireBikeMechanic
11 ай бұрын
thanks for watching and your comments
Fantastic job Dave - just like you did the other day on my Genesis Croix de fer - thanks again
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, Thanks for watching, good to see you the other day, glad we got it sorted
top work again there dave more videos please love watching the master at work 👍
@TheYorkshireBikeMechanic
Жыл бұрын
Thank you
Really like your design, excellent idea. Thank you.
@TheYorkshireBikeMechanic
4 ай бұрын
Thanks for watching and your comments
i had a good stuck seat post and i mean stuck took it to a few bike shop around 3 of them and each time the seat post was getting damaged good style twisted bent none of them could get it out of frame so got it back home sat there looking at it for an hour and ping! in my head i oiled it drill a hole right thru post for the largest screw drive i could find and put it right thru the holes and turn it one way and the other while lifting it and wow came out easy the bike was a specialized rock hopper alloy
@TheYorkshireBikeMechanic
Жыл бұрын
Nice one, well done.
Very entertaining and informative YBM. I was cycling up near Tuel lane tuther day and thought about passing by your workshop to say hello but it had gone past 6pm. But I guess there's always going to be another time 👍
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments, call in anytime
You should put a strain gauge or industrial scale on it to see how much pulling force is required, and keep a league table! Winner gets a new seatpost 😁
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments, Ive often thought of that , might do ot one day
When working on my Japanese cars I always loved the short, sharp crack when a bolt initially releases. Don’t forget the goggles when using the powered brush….
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments
I'd love to experience one of these cracks in person! So satisfying! well done!
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments, you would be welcome to attend
Amazing and satisfying sound!
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and your comment
Really nice one…I share your satisfaction of getting the seatpost out👍🏻😎it really is the hardest and my first part when stripping parts on a bicycle😅
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments
@hookerjl1
Жыл бұрын
@@TheYorkshireBikeMechanic You’re welcome🙂
I’m at a last resort stage with a trek 520 steel frame aluminum post. But I’m nowhere near Yorkshire. Plus the waiver makes me nervous, though I understand it. Wondering what your thoughts may be on using gallium to “melt” the aluminum out.
@TheYorkshireBikeMechanic
10 ай бұрын
Hi, Thanks for watching. I would not like to comment, sorry
Pedal threads can seize up in the crank arms too , good idea to take them out and Grease regularly.
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and your comment
Man I wish I lived near you do get this done. Exact same post on my 1976 bianchi. Can’t get it out for the life of me
@TheYorkshireBikeMechanic
4 ай бұрын
Hi, thanks for watching and your comments, sorry!
Nice work
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments
Would you say that’s the loudest sound in cycling? Would a 60 psi tyre pop be quieter or louder than that!? I always think about my 60 psi kick scooter tyres, what if they pop? Would it result in hearing loss?
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments, a tubeless road tyre is the worst
Hi, can you tell us, what the black collars are from/made of? Are these custom made?
@TheYorkshireBikeMechanic
11 ай бұрын
Hi, Thanks for watching, They are made of steel, they are off the shelf but are turned by me to make them the right diameter for each seat post, www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313&_nkw=split+collars&_sacat=0
Brilliant 👍👍👍
@TheYorkshireBikeMechanic
6 ай бұрын
Thank you
Do you use heat cold combos or only heat to unstuck it?
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, Thanks for watching and your comment, just heat
Well done!
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments
Hey Dave. I had to purchase a Bosch Gen 2 DU because, Bosch wouldn't warranty their POC after just 5600km I did manage to get a warranty (so they tell me) and the return of the replaced DU. Would you be interested in having a look at it and 'taking it to bits'? It failed with the typical 500 error code. Bearings feel fine Let me know and I'll send it to you 🖐
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments, I have one or 2 of gen 2s about so Im ok thats but thank you for your offer.
can you get shitmano motors from madison ? local ebike shop said they dont sell them but i want a ep8 to replace a out of warranty e8000 can it be done?
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, shimano only supply replacements but the ep8 will nopt fit in a bike that was e8000 equipped
@soundwave6769
Жыл бұрын
@@TheYorkshireBikeMechanic hi when you mean replacments i take it thats warranty only so out of warranty madison will not sell any motors to any dealers ?
Have you moved to new premises Dave?
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, Yes we are now in a high street shop.
What did you say at 8 minutes... another round tousler?!! 😂🤣
@TheYorkshireBikeMechanic
Жыл бұрын
Hi Andrew, lol, I said "another ram tousler", its not a real word but the phrase that is used by snooker ace joe johnson when he commentates on a snooker match.
@mi16chap
Жыл бұрын
Haha love it, going to start dropping that into some work conversations 😜
What's name of machine
@TheYorkshireBikeMechanic
21 күн бұрын
Its called the beast and its our design
Well done! I guess the only question I have is exactly how long is a "Donkey's Years".
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments, It's anyones guess, lol
I gd a similar case on one of the bikes I found on scrap and could not handle it But no tools just human power I didn’t try to heat it up It was alu cannondale cad 2 and alu seatpost Think someone had to stick oversized post on it 🤣 My female friend made on this bike return trip to Edinburgh and back to Glasgow and the seat post was down to lowest position frame i would say 16inch size rather small 😉🤣🤣🤣🤣
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments
👏👏👏😊👍
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments
Dave good work, great videos couple of ideas for you. have you ever tried penetrating oil applied 24hrs prior? Twisting the seatpost with a long wrench while pulling?
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments, the beast is a last resort after all thats tried
You should wear safety glasses
@TheYorkshireBikeMechanic
Жыл бұрын
Hi, thanks for watching and you comments, might be a good idea.