How to remove a stuck pulsator / impeller from a top loader
How to remove a stuck pulsator / impeller from a top loader
Panasonic EcoNavi
NA-FS14G
In this video i show how to remove the a pulsator which is very tight. I use a chisel to loosen the pulsator from the splined fitting.
Пікірлер: 33
I have a different washer with a similar plate. It REFUSED to come out no matter what I did. Tried this trick with some rope I had laying around and after a couple tugs, it popped right out! Super helpful! I would not have thought to do this on my own. Thanks!!
YESSSSSS I WATCHED 1,273 videos! Finally!!!! Thank you!!!
I got mine up with a crochet hook, the string almost worked. Thanks for the ideas.
String worked for me thank you
Please make about videos front load washing machine wiring and components how to checking sir Thanks for video
Thanks for this, got to open my samsung washing machine.
Good job.need more details.
Rope was perfect!
I tried everything to remove the agitator to no avail and then gave up and ran the washer on Tub Clean mode with the bolt removed. To my surprise, found the agitator floating in the water mid cycle. Would prob stop the washer before spin cycle as that may ruin the agitator.
@XeniaMonicaBagaporo
2 жыл бұрын
This helped!!! Thanks
@charlesnorvell6393
2 жыл бұрын
Nothing else worked but this! Came out enough to fit my fingers around the edge and 1 good tug and out it came!
@michaelcleary3436
Жыл бұрын
After trying every single thing in this video, this is what finally got it to work for me. Thank You!!
Thank you so much
Thanks.
Thank you
Please advise I have semi w/m top loader I have to repair gear box which has water leakage problem. Tried a lot to take out the pulsator, bolt removed, put chain behind/below pulsator to take out on pulling it, but failed as it is jammed. Give the solution.
How many V does your impact range has?
Just loosen the screw and let it spin......automatic pulsator come out easily
Reinstall the nut or bolt . Tap it with a hammer while pulling up on the impeller.
In my machine,the pulsator came out but the bush jammed on gear side and is rusted.how to remove it
Ifb top load washing machine drum inside pulsator how to removing video upload sir....
I want you to try my Kenmore washer ? I Used all kinds of techniques! ACID !Screws! !strings! RUBBER HAMMER ! You name! I just need a Boby cat 🐈 digger! !the dam thing still stuck! 😁😁
@2manycatsforadime
3 жыл бұрын
usually they beat it to pieces and sell you a new one for 200 bucks
Hi.tell me please who knows.how I can remove the Avanti washer mashine model is STW20D2P pulsator .with wich key model Exactly.
what if the nut won't loosen?
Very Good!... #28 ✝ {11-20-2022}
My pulsator bush is stuck... I tried all way but failed
1:56-1:58. I want to open that part. A sock is stuck beneath that. Please help.
@ecologicaltime
3 жыл бұрын
this may help: kzread.info/dash/bejne/h6Z3lbZspZvFf7Q.html
@content8420
3 жыл бұрын
@@ecologicaltime Thanks a ton!!!!
I tried all of them and they didn't work huhuhuhuhu
@ImranShaikh-nh6bp
3 жыл бұрын
Use a drill
DON'T DO THIS! TRY MY METHOD INSTEAD!! I watched a TON of these videos and only 1 worked. I felt dumb after trying all the tools and straps. Just take off the plastic cap. Remove the bolt. Pour in some bleach and set it on 'Tub Clean'. I canceled the cycle at 0:50 and the washplate was there floating in the water. Stupid easy. The tub will drain automatically after a while or you can just close the lid and let it complete the cycle. I felt silly after trying to manhandle the washer! (Note: I'm 5'2" petite female and probably wouldn't have been able to muscle that thing off anyways.)