How to Remove a Sticker without a Split Backing
I've had a few complaints about this, and very rarely I have seen it first hand happen to others, so I just wanted to make a little video for my customers or anyone else. I hope it helps, and hopefully I can learn how to say the word "adhesive" correctly one day...
www.chumpmagic.com
chumpmagic
chumpmagic
Пікірлер: 71
If folks are curious, I use Sticker Robot to print my stickers. I highly recommend them! They always do a great job and they are one of the few companies that actually do screen printed stickers which is the best in my book!
Was having trouble removing the back of a sticker we bought. Watched this video. Mentioned the flicking and I was like there's no way it's that easy......it was. Thanks for your help!
@caifabe8050
Жыл бұрын
it's not that easy lmao my stickers have a thin backing too so i cant even use this video
Thin backing on these thin stickers made this impossible! After watching your video, I just calmly chose another area and believed I could & I did it 92 more to go! Thank you
I didnt think I would be the girl who couldnt peel a sticker... But I was. Your video helped alot! Thanks for not making fun of us who are sticker challenged ❤
Just Googles how to peel a sticker and your vid came up, it helped! Explaining how thick the backing is was a huge insight.
dude thank you so much i prevented damaging my stickers
Thank you for this video! I've had customers have trouble with their stickers and i send them your video. helps me out a ton!
@ChumpMagic
3 жыл бұрын
Thanks. I am glad it has been helpful for you!
Thanks for this! Often however with the craze of junk journaling the stickers that are purchased have a very thin backing, so sticker and backing are both thin. To separate has been a very difficult process for me. But I will try to look at various points and see how I do.
@viperaider3250
Жыл бұрын
Shut up bitch it’s easy for any side no need to be a dick to a small creator trying to make content
Thank you so much for the help. Works so well.
i was trying to get the back off a sticker for 15 minutes. I watched your video and it literally came right off. I feel like an idiot lol
@Gr4ceful4life
2 жыл бұрын
Same, dying trying to pick off a sticker without something like my nails scratching it
This was actually very helpful, thank you!
I'm making my own stickers and the papers are so strong I needed a technique so thank you so much 🔥
Holy shit.. it worked almost right away. Thanks man!
It was looking damn easy and when I tried it happened the same... 😇😇😇iam really grateful to u....
@ChumpMagic
3 жыл бұрын
Glad I could Help!
Your art is amazing!
@ChumpMagic
4 жыл бұрын
Thank you! I am glad you like my work :)
Yes- Thank you; your video is informative and helpful.
Helped big time! Thanks!
Thx, 7 yrs and still helpful
Thanks for the tutorial. I can now open stickers that i got as a gift
You save my time which is my life. Thanks bro!
Wow... worked like a charm! Thanks for the tips.
Bro what I did it and it was so easy thank you for the video.
OHH THE FLICKING WORKED i brought my own sticker paper and really had a hard time peeling them off but this helped me a lot ty!
Something so simple but helpful, Thanks a lot!
That worked so perfectly ! Thank you
thx man your video helped me a lot ..
I struggle with this! Thank you!!
So helpful ! Thank you your a life saver
Very helpful thanks!
I have Pest stickers where as it is sticker on both sides.. I was looking for help ease with those. They sure are tricky to peel both sides
Thanks it helped a lot
Thank you very much, you are a life savior!!
What if the sticker is round and there are no such points? This video was totally useless to me in trying to get the backing off a round sticker, although I was finally able to do it on my own by dispensing with my fear of destroying the sticker.
@Ariel.serero
11 ай бұрын
You need to put your nail right between the sticker and the paper ,It took me a couple of attempts .
Thank you for the video. I got my stickers off safely,Lmao!
Thank you!
Your a lifesaver ❤
Thanks so much for sharing…
Thank you ☺️
thank you bro
Thank you for this i felt dumb😂😂.
Thanks!
bro thanks
Thank bro, now I flick to get the sticker
Dope vid man, really helpful, thx man🙏🏻🙏🏻🙏🏻
@ChumpMagic
3 жыл бұрын
Thanks you! I am glad I could help.
i hate that the plastic layer, which hold the graphics peel off overtime
@ChumpMagic
2 жыл бұрын
Do you do digital prints? Digital prints have a UV cover (what I assume is the plastic layer you mention) otherwise they would fade in the sun really fast. I always recommend screen printing stickers. To me, they look better, feel better, and are better quality when screen printed. I always recommend Sticker Robot and they make all my full color stickers. They are the best!
nice
Doesn't work for StockX stickers unfortunately :/
Please define what a sticker friendly town is
I have the power now.
Everyone else my age *gets good jobs, has kids, bought a house. Me *how to peel sticker*
But mine is really thin
Original NFTs? Sure look like it
Thank you🤦♂️ literally spent like 20 min tryna peel a sticker from GOAT
@ChumpMagic
3 жыл бұрын
No worries at all. Glad the video helped you!
Me with a poorly cut round sticker
@ChumpMagic
3 жыл бұрын
Circular stickers can be tricky, but I get them using the method at 2:15. Sometimes it takes a few tries. I hope that helps!
Long ass video for a simple solution
did not work
@ChumpMagic
2 жыл бұрын
Is it one of my stickers? It should work, but if there was water damage or something like that, the sticker might need to be replaced. Please feel free to email me if that is the case.
@debbieeisenach470
2 жыл бұрын
@@ChumpMagic thanks for the reply! Not one of yours :) something i bought in London from a tourist shop....oh well.
Stickers without a split back suck. So much time wasted when.$.02 extra cents could have been spent to have an easier customer experience.
Bro is slow