⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzread.info ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

@anthonyindeglio4179

3 жыл бұрын

Can you please help me,where can I have a Crankshaft/Camshaft Relearn Procedure done at?

@brianbrian3971

2 жыл бұрын

@@anthonyindeglio4179 any local licensed mechanic will have a computer that will plug-in to your ECM PCM

@truebeliever5233

Жыл бұрын

This is just a commercial for high tech gadgets. I own a Dodge, not a Ferrari and need to do all my own work. Does anyone have a link to any vids for broke sad sacks like me to be able to do this without the pricey Amazon equipment?

Video seems straight forward enough, but would be good to have a suggestion for most of us that don’t have the expensive professional grade code scanner.

Thanks for including the glitch with stopping/restarting the engine. So many how-to videos don’t include the sidetracks & glitches, and make it look way easier than it usually is.

Excellent explanation. Thanks very much for this info.

Thank you for this video!. vary helpful took care of my problem

Thanks for the video! Can you tell me what kind scanner did you use in this video. Thanks!

Man I need you help please ! Can this be learn or relearn without a scanner ? Please tell me how !

I love your videos, good blessing you

Wont disconnecting the battery for some time and draining any storage, then re connecting and restarting the car force the car to re learn stuff? The software is just for faster fixes.?

@mohannadbluray2543

2 жыл бұрын

How to restart car ??

Thanks so much for the video. I love that you did it in your Borat voice.

@coreyprice8764

3 жыл бұрын

Thats his regular voice

Now you just need a $3k scanner to relearn. That’s lovely

Now you just need a $3k scanner to relearn. That’s lovely.

@TheDweeb002

4 жыл бұрын

Fuck that. I just need to fix one time not open a garage

@Another_Random_Dave

4 жыл бұрын

The Dweeb buy it and send it back lol

@dishsoap1

4 жыл бұрын

David Actually, I replaced the camshaft sensor in my 200 and didn’t need to relearn anything. So I’m not sure if a scanner is even required.

@Another_Random_Dave

4 жыл бұрын

dishsoap1 most of the time it’s not, however, for my situation I have to buy a scanner to fix the problem.

@johnprimeaux6835

3 жыл бұрын

@@---xd4wm does the 906 do it

I just put a used engine in my 06 dodge magnum and I need somewhere to have a Variation Relearn Procedure done to it because it will only idle and does not have a accelerator response?what are some shop names where i can have this done in West Palm Beach Fla?

Nice sir

I have a 2008 accord that need relearn the CPk sensor. What scanner can I use not all scanner have that fuction. Any recomendation?

You only need a code reader. If you do not get a code and your Jeep is stopping when driving , it is most likely the crankshaft sensor. While installing the OEM sensor, not some cheap junk. Disconnect your ground and hot cables and connect them together . After you have done the sensor connect the battery cables. Now turn on the key and let the fuel pump cycle and then turn on the car and let it idle to get warm to about 75 degrees. If your code tool is still attached delete the codes. Now turn the car back on and it is done. No codes should show and the learn has completed.

Is this required for a 2007 crysler 300 2.7 ?

I replaced the camshaft and the sensor so all it has to do is relearn the sensor and it'll be fine?

What model of Maxisys are you using.

For everyone saying you need a $3000 scanner you’re wrong. The Autel has the maxi check mx808 that’s $500 and it let me relearn. Yes I know $500 is a lot but it comes in handy for me being a mechanic and doing side work

@JarvayManning-p1t

14 сағат бұрын

Yeah me too im a mechanic as well. I have the mk-808. Its a beast. What's your email we can exchange info and share some knowledge. To make more money.

Please Keep making new new episode

What if you re- learned it and it still acting up what then?

Dear brother your way of explaining is outstanding thank you so much for uploading video best regards

How or can I do a cam/crank relearn without a scanner

@Popclone

Жыл бұрын

Use the force. 😂

@BatMan-hf3gt

5 ай бұрын

Yeah that's what I need to know. I'm about to go dark web to get the software.

Do i have to do this to 2014 dodge dart

how do u relearn a vw 2002 beetle 2.0 camshaft position sensor

2016 Mustang Gt 5.0 Manual Check engine light begins flashing Randomly here and there not every day .. when I’m driving at normal speeds or highway speeds . Light Turns off automatically when I let Gas pedal off or neutral , or complete stop with out turning car off .. after I can -No current DTC /Fault Previously detected not currently present code B11F0:14-08 Air intake Damper Position sensor . -P0313:00-68 miss Fire Detected With Low Fuel . No present Codes On PCM . Took it to ford dealer Was told to replace Crankshaft Position sensor & I guess I have to relearn. I own a MaxiPro MP808TS , Will I be able to do a relearn with this Scanner . I follow step by step but after Control Unit it takes me to a different menu , compare to yours .. any suggestions overall .

Will a mechanic do this? If you ask them to? I took my Chrysler Sebring to the dealership and they couldn’t figure out what was wrong. I paid over $700 and they replaced something that didn’t even need fixing and my car is still the same

@johnszoke586

4 жыл бұрын

Typical mechanic

This is very very useless 😮 Thank you very much

I just had this p0315 code on my 2014 chevy cruze lt 1.4 and the car won't start or try to start at all what do I do bc I can't work for 3 days now

Someone help me out I've replaced my my flywheel, clutch, pressure plate with light weight aftermarket parts. My ECM, and crankshaft position sensor.(car was in wreck). To my knowledge you have to get your crankshaft position sensor/cam relearned if you do the sensors, my car is throwing dtcP0315. It means no crank sensor learned. I've been told by 2 technician's that my certain car 2013 dodge dart limited 1.4lturbo doesnt need to be re learned and they are trying to say I got a timing issue or maybe mechanical instead and wont listen to me about re learning me sensors on the timing they said you can't relearn the crank/ cam on my car. Any help or advice would be appreciated

I have a 2001 jeep grand Cherokee Laredo. Do I have to do this procedure if I change the cam and cranck sensors?

@dinuguan510

4 жыл бұрын

Just learned of this an hour ago. I guess I should visit the forums again. Wondering the same about my '06 Magnum R/T. I read elsewhere that this is an "optional" thing? I have to believe it's mandatory because I've replaced SIX crank sensors in my car for stalling in the last 13 years (and this always fixed it) and this was the first I'd heard of it. I always just figured therre must be QC issues with the sensors themselves, but this makes much more sense. 5 months ago I replaced both cam and crank sensors, and tonight I'm stalling out again. Any mechanics out there with a verdict?

@brook280

4 жыл бұрын

No your car ecu will learn it quick, this way is more if a instant factory settings fix.

@TurboD16z6

4 жыл бұрын

@@brook280 would be nice to know what quick means. like 10 minutes or a week of driving? i just replaced my camshaft sensor and now its throwing me a crank sensor p0335. i try to reset it a millions times, i try trying out the fuse. nothing works. it takes a while to start but once it does everything runs normally.

@sggarcia7619

3 жыл бұрын

@@dinuguan510 a reset of the sensor after installing it might fix the problem

@dinuguan510

3 жыл бұрын

@@sggarcia7619 Thanks. I had the dealer do the learn procedure but it didn't help. I ended up replacing all 8 ignition coils (Denso 673-5202 from rockauto) and it has been running like a champ ever since Oct 2019. Not even a hint of a hiccup anymore. Say a prayer for me. LOL

How you do that without that machine?

I just recently changed out the crank shaft position sensor in my 2008 bmw 335i . While driving normal it seems to be ok but as soon as a pit the gas pedal to the floor no matter what speed I’m at it goes inti limp mode and throws several codes . Do I need to get the new crank shaft sensor re learned and will this problem possibly go away ?

@sggarcia7619

3 жыл бұрын

eventually.

@screwstowne713

Жыл бұрын

Bro I have that problem rn with my infinity q50 , what did u do ?I changed the vvts

I have a 2014 jeep grand cherokee and I've been having a p0018 code pop up I had my mechanic replace both sensors (cam & crank) and the code still pops up. The engine runs great but this fault needs to be fixed. Please help!!!!!!!!!!!!!!!!!!!

@kevinvtx

3 жыл бұрын

What did you end up Doing? I have 2014 gc 3.6 and experiencing random long crank to start. Wondering if your experience may save me some trouble.

@izona4838

3 жыл бұрын

@@kevinvtx Hello, yes for me it turned out to be the actuator cam phaser part# 05184101AG. Good luck.

What does it mean relearn the sensor , did you have to do it if only replace the sensor

@rickanderson8088

5 жыл бұрын

Its calibrating the sensor.... The relative position of the crankshaft and camshafts is very important. Replacing the sensors would need calibration, but also anything that affects those relative positions, like changing the timing chain or oil control solenoid or cam phaser.

@perezism1979

4 жыл бұрын

@@rickanderson8088 Hey I changed my timing belt on a buick enclave. Before I changed the chains the car would start. I followed and made changes to excact specifications but the car won't start now. Can I perform cam relearn with a no start?

@Ozzy920

4 жыл бұрын

@@rickanderson8088 im not changing the cam phaser im just changing the camshaft would I need to re program my 2016 grand caravan?

Do I have to relearn new camshaft sensor on Bmw 4 series

@MyLifeThai371

2 ай бұрын

You have to do the crankshaft relearn procedure. A guy just did it on youtube with a "vident iLink 400" that he bought new on ebay for $156 with his 5.3L chevy

Damn I thought it would be more technical than that

Yeah you got an SRT8 yeah you don't know what you doing though cuz actually it would help your pcm ecm if you relearned it

What model autel scanner are you using in this video? Thanks, Walter D

@meanodustino9563

Жыл бұрын

likely a maxisys808

I just replaced the ECM in a 2008 Pontiac Grand Prix. Its running like the Crankshaft Position Sensor is bad. Its giving me codes P0336 P0386 and P2162 which are all related to the Crankshaft Position Sensor. Any suggestions.

@oscarspringer293

4 жыл бұрын

Krazi Kriz I’m experiencing the same issue but with a 2009 Saturn aura. We’re you able to find out anything?

@krazikriz4864

4 жыл бұрын

@@oscarspringer293 no the only thing I can figure is an electrical problem

@anthonyindeglio4179

3 жыл бұрын

Check the reflector wheel on the camshaft

What model of scanner is this

@gilbertoavendano7711

4 жыл бұрын

Bt906?

I dnt think i need the scanner to run 3 relearn cycles after changing a crank sensor !! I did not have to do no relearning w no scanners for replacing a crank sensor in 14 charger srt8!!!

I got the same scanner it says no communication right when I click reprogram cam crank not sure why :/ I do have a signal from the sensor itself in live data tho

@EricTorres916

4 ай бұрын

Any luck? Same issue..

@ChevyShah

4 ай бұрын

@@EricTorres916 bent terminals at the pcm was it for me

What do you do if after you Relearn the scanner says, "Cam Crank Relearned Failed".

@EricTorres916

4 ай бұрын

Find a fix? Same here.

I meant to post that comment below on your dart video but get back to me when you can

Glad I didn't touch my cam position sensors because that scanner cost is ridiculous! I'll just leave the old ones in till they fail.

My 08 avenger 3.5l won't start after new part in still shows p0340 any ideas?

@MyLifeThai371

2 ай бұрын

You have to do the crankshaft relearn procedure. A guy just did it on youtube with a "vident iLink 400" that he bought new on ebay for $156 with his 5.3L chevy

This is the same for bmw

What if the engine doesn't start after replacing crank and cam sensor??

@bryceharrison4917

Жыл бұрын

What did you do, I'm in same boat

@marb6803

Жыл бұрын

@@bryceharrison4917 did you figure it out?

@marb6803

Жыл бұрын

@@bryceharrison4917 did you figure it out?>

@jibranahmed9569

Жыл бұрын

I got same problem did you sort it

@MyLifeThai371

2 ай бұрын

You have to do the crankshaft relearn procedure. A guy just did it on youtube with a "vident iLink 400" that he bought new on ebay for $156 with his 5.3L chevy

I already replaced the crankshaft position sensor ,in my dodge journey 2013 ,2.4L but now my car won't start, do anyone know what could be? Thanks,good video.

@Kaylobless

4 жыл бұрын

Rico Suave did u do what the video asked??

@Kaylobless

4 жыл бұрын

Rachael lol well worked for me, pay attention!

@Mr.Revere

4 жыл бұрын

@@Marie895 thank you, I just found out that the sensor that I bought at auto zone was bad.,God bless you and thank you anyway.

@Mr.Revere

4 жыл бұрын

@@Kaylobless yes ,I just found out that the sensor that I bought was bad,thank you, God bless.

@LUISGONZALEZ-jy3wq

4 жыл бұрын

Rico suave how did you find out that the sensor was bad ?

SCAN TOOL IS ABSOLUTLY REDICULESS COST. HOW ABOUT CLEARING THE CODES AND STARTING THE ENGINE?

@MyLifeThai371

2 ай бұрын

You have to do the crankshaft relearn procedure. A guy just did it on youtube with a "vident iLink 400" that he bought new on ebay for $156 with his 5.3L chevy

why needs sensor to be relearn 🤔

How can I relearn the sensor if now my car won't start after replacement? If anyone knows I will appreciate it.

@sggarcia7619

3 жыл бұрын

if you watch this video again, you will find out that he relearned the sensors without starting the engine. only Switch in the ON position .

@marb6803

Жыл бұрын

@@sggarcia7619 yeah and how you get it to 70 celsius...?

@marb6803

Жыл бұрын

did you figure it out?

I'm trying to fix my truck not open a damn garage

@mikem302

3 жыл бұрын

Then take it to a mechanic

@jasonbender2459

11 ай бұрын

@@mikem302 and shut it

Can't understand half of what he is saying not any help !

@Kaylobless

4 жыл бұрын

mike clements Are you serious? lol pay attention

@mikesalko1885

4 жыл бұрын

Ur clearly deaf he has accent but speaks perfect English

@tysonbehnke079

3 жыл бұрын

No man he's hard to understand, sounds like a fucking robot

Really why u have to be so far away from.mic when making these videos I can barely here

@OpinionatedGent

4 жыл бұрын

Hear

@TheDweeb002

4 жыл бұрын

You can barely spell too

@coreyprice8764

3 жыл бұрын

Turn ur volume up bc his voice is loud as hell on mine

Really your just trying to sell a $2409.00 diagnostic/obd2 device, not help people. Why don't you try being honest.

2500 dollars :/

I really want to watch this vid.. but I absolutely hate the sound of this guy's voice.. hate it..

Can you speak English please