HOW TO REGEAR A SUPERDUTY DANA 60 (part 2) - Project Maple Leaf Jeep Build (no. 12)
Автокөліктер мен көлік құралдары
Learn how to regear a Ford Superduty Dana 60 in this video series. Part 2 will show you how to set up pinion depth, pinion bearing preload, and how to reinstall the pinion into the axle housing.
Please SUBSCRIBE to show your support! It’s FREE and allows ne to continue building things to provide you guys with good content and work toward the vehicle giveaways!
Check out my website to see the brands I choose to support!
WarPaintoffroad.com
LINKS:
IMPACT GUN
www.amazon.com/dp/B01MCQ5VO1?...
TORQUE WRENCH
www.amazon.com/dp/B07MKSJ4SG?...
GLOVES
www.amazon.com/dp/B0001VNZQY?...
CLAMSHELL BEARING REMOVER
www.amazon.com/dp/B09724XFZ9?...
GRINDER
www.amazon.com/dp/B09F9PL2MD?...
FLAP DISK
www.amazon.com/dp/B01D0HIIJE?...
DREMEL
www.amazon.com/dp/B077Y86FKJ?...
DIGITAL CALIPERS
www.amazon.com/dp/B000GSLKIW?...
SHOP PRESS
www.amazon.com/dp/B000HD6G7G?...
TORCH
www.amazon.com/dp/B09PMX9J7D?...
INCH POUND TORQUE WRENCH
www.amazon.com/dp/B01FMXEWQC?...
BEARING DRIVER SET
www.amazon.com/dp/B076HQMJKC?...
***Disclaimer*** This video is just meant to show how I do it. Injury may occur by trying to replicate what is in this video. Attempt at your own risk, with proper equipment and training.
Пікірлер: 17
Man this is the exact video I was looking for! Super helpful! Im about to setup a Super Duty Dana 60 for the 1st time ever, I have all the appropriate tools needed. But understanding the shims etc was confusing. I like the idea of not using any shims under the inner bearing. That seems like the way to go.
@WarPaintOffroad
5 ай бұрын
Heck yea! Let me know if you have any questions.
@BuildItWheelItExploreIt
5 ай бұрын
@WarPaintOffroad appreciate it! So I've torn down two factory untouched 05+ Dana 60 HPs from super duties. Neither had those large oil slingers behind the head of the pinion and inner bearing. So I assume most shops use a standard shim the same thickness there. Or do what you're saying and don't run any shims there and put them all in the outer stack.
Looking good man 🥳
@WarPaintOffroad
Жыл бұрын
Thanks buddy! We are getting there. The suspension and stuff which I’ll start putting out soon will make some really good content.
@mrbrettdimarco
Жыл бұрын
@@WarPaintOffroad yeah it will for sure!
Best explanation video!
keep em coming
@WarPaintOffroad
Жыл бұрын
Thanks for the support! It’s going to get really good pretty soon!
Great stuff man 🤘🏼
@WarPaintOffroad
Жыл бұрын
Thanks for the support!
been following your video as a guide somewhat. just realized i didnt use the pinion oil slinger and neither did you? now i have to go redo this. why?
@WarPaintOffroad
Жыл бұрын
The Dana Superduty 60 doesn’t have one from the factory.
can you use the dremel to sand down the race as well?
@WarPaintOffroad
Жыл бұрын
To make a set up race..sure. It might take a bit longer. I just use a flap wheel in my grinder. Makes pretty quick work of it.
@vincentmamotos9937
Жыл бұрын
@@WarPaintOffroad thanks. I've been doing alot of studying and prep work for doing regear myself. The more I watch and study, the more I'm convinced that anyone should do it. It's just tedious. And most people want a 1 day turnaround. How the yukon gear holding up?
been following your video as a guide somewhat. just realized i didnt use the pinion oil slinger and neither did you? now i have to go redo this. why?