Elevator music needs to go though xD. Tough to hear what you're saying in some parts

Thanks guys. love the content

Just bought a carb off ya ,very pleased with the product ,runs great.the fact that you use the actual jetting for the warrior is awesome 👍

@zoomzoompartsllc

4 ай бұрын

Thank you for your support

This is the best video I've seen on warrior rebuilds great content!

@zoomzoompartsllc

Жыл бұрын

thank you so much hopefully others find it helpful as well

Great video very informative

@zoomzoompartsllc

Жыл бұрын

Ty bro

For the ring end gaps what should they be?

Does the connection rod wrist pin bushing spin?? Or is it stationary?

Thanks for sharing 👍🏼

No lock tight?

What was the measurements for the valve lash adjustment for Both sides I'm been new installing new rocker and Rocker arm shafts on my 2002 Yamaha warrior 350

@zoomzoompartsllc

4 ай бұрын

if you are using a stock cam i go with 0.08 in and 0.18ex but always check with repair manual

You all really need to do a full engine build . Bottom end top end and transmission. Full build. So we cam see both sides of inside the cases and transmission crank and so on. Plus a valve system and cam.

@zoomzoompartsllc

7 ай бұрын

we did do the cam and valve system in this build as for the bottom end we could probably do a small video on it as i have one i am going to be opening.

Why did the valve covers need to come off and can you explain what you were doing at the very of the end of the video with the flat metal tool (I don’t know what it’s called)

@zoomzoompartsllc

Жыл бұрын

Feeler gages have to set the gap on the valves

What are those 2 allen bolts for bellow the cam cover ? As I'm taking mine apart the one wasn't even tight

@zoomzoompartsllc

11 ай бұрын

Part number 91317-08050-00 they hold your gasket head and block all in line till you get the main head bolts in

@michaelpresey2273

11 ай бұрын

@zoomzoompartsllc thanks for quick reply !

Does this kit come with the valves already installed in the head? Or is that the head that y'all took off the engine?

@zoomzoompartsllc

11 ай бұрын

The head we sell dose not have valves or rockers in it

Are you using a oem cylinder head or aftermarket? Was always iffy on the aftermarket heads for the warrior.

@zoomzoompartsllc

Жыл бұрын

We used are forged kit we have it in all are warriors

What about bottom end? I think my noise is rod bearing

@zoomzoompartsllc

Жыл бұрын

we did show a open bottom end in one of the videos but had no reason to open this on you can check your crank and rod bearing without taking it apart. if that checks out it could be a counter balancer bearing and that would have to be torn down

How much valve lash is there supposed to be?

@zoomzoompartsllc

9 ай бұрын

Would depend on your cam but with stock cam I go 0.18mm and 0.08mm

@ericm3836

3 ай бұрын

Is the .08mm in the front or the back?

Is that dude’s voice really like that or is he faking an accent lol

@zoomzoompartsllc

Жыл бұрын

that's richards voice and accent 100%

The shitty music ruins it