oh boy .. i watch your videos to relax after work .

I'm still at Trinka Davis Veteran's Village, in Carrollton, GA, but I'll be out of here in 2022. I had a 1995 Sidekick from 2010 until 2013. I'd love to find a Suzuki to play around with! Semper Fidelis

Yes! This video couldn't come at a better time! Thanks so much!

@kellyburch3041

6 жыл бұрын

Yea? ...it could've come three weeks ago when I was tearing down mine! I love the way these guys present things and explain. I'm strapping up to go do it again!

I just replaced my inner axle seals and placed the Trail Gear Knuckle Ball Wiper Seals. Here's to a drip-free garage and trails!

@federicoferrero8259

6 жыл бұрын

Rimozione paraolio differenziale Suzuki samurai

Very good work keep moving 👍👍👏👏👏👏👏🌷🌷🌷🌷

Excelente video! Gracias

To remove the disc brake just put two Bolt in the two extra holes I believe there 12 mm + tighten them evenly back and forth till it comes off do not hit it with a hammer that's just seams so stupid being that there is holes there for removing it

Compared to how a wrangler front axle is designed at the level steering articulations, Suzuki, toyota and nissan front axles seems to be solidly and toughly designed, those axles will better resist to a hard exercise than a wrangler axle, am I right saying this or is it just an impressive? Thank you

Cómo se saca la junta del palier? Hola

do you reuse the backing plates in installation

Gold!

is it the same on an sj410 without lockouts, and can u put on lockouts on an axle that didnt come with any?

hi. i have a death woble problem with my suzuki samurai. always it starts when you hit a pothole on smooth roads. it is starting like a litle wave and soon after 5 second or a bit more; the wave is turning like tsunami 😅steering wheel is shaking too hard and sometimes it is unmanagable. i think it is becasue someting of fron axle. when i hit someting like rock on the road with my right wheel it is reflecting the steering weel to hard. how can i solve the stiouation? would you please help me?

3:46 aluminum round bar is used for hammering ... my god...

Hi,I have a problem, I hear clunking noises after putting my sj410 into 4wd,what does it mean?

@coreyzer0

5 жыл бұрын

How's the oil in your transfer case?

@JohnnyLee8355

5 жыл бұрын

@@coreyzer0 We fixed the problem,it was the universal joints,they were seized.. transfer case still had oil in it,but pretty old...so..changed that along with the differential oils.😁

Step 1. Wash off the dirt from the axle assembly as not to get grit into everything. Step 2. Drink a beer.

@norddinedjouahra2154

5 жыл бұрын

.

Genial

Not the proper way to remove a tie rod end. Strike the knuckle on the side of the taper.

And why do you add those things welded to that axle? That is a trap to catch mood and dust 🤨🤨🤨🤨🤨🤨🤨🤨🤨🤨🤨🤨🤨🤨🤨🤨🤨🤨

0:22xx