Tons of parts, Good job putting it back man.

There is a reason that these watches are designed, mfg'd and assembled in a class 1000 clean room in Japan or Thailand.

for future reference, at about 9:15 that flat wire that you plug into the interface has a little release lever on the interface itself. it just pulls up real easy.

@bestopinion9257

Ай бұрын

he destroyed the watch and will sell it as new...

I wish Casio put vibe alarm on some of the higher end Gs. I'm an old dude and the alarm is just too quiet and no chance to hear it under a sleeve. I think there's a gap in the market for super loud alarm Gshock or vibe alarms (like when I rock my GD350) - us old dudes, who punished our eardrums with too many headphone hours, need some consideration from the mighty Casio.

@GiShockGo

5 жыл бұрын

What do you think of the vibration on the GD350? Strong enough for you? I think it could be a bit stronger. I personally like the feature.... much more subtle and discreet than beeping, but give the user the option. Thanks for watching and commenting Freeatlast!

@freeatlast1963

5 жыл бұрын

@@GiShockGo I agree, if the vibe had two settings like the light has, a normal vibe and extra 50% vibe, I think the GD350 would be better. If they could fit this in a 5610 or similar square and drop the multiband in favour of just bluetooth and maybe put in a temperature sensor, I think that would be a near perfect G. What are your favourite Gs? Is it just me, or does the new Rangeman, look too much like a computer and not a G. What do you think of the GPW1000 and 2000. Too many questions, I know, lol.

Have to service my O rings and straighten my E clips. Do you know how often the O rings should be serviced ? My Rangeman had buttons sticking and clicking when press due to dirt in the button housing. Buttons are working way better now all I have to do is lubricate the O rings and close it probably hope everything goes well.

Do those screws on the face plate of the watch do anything, mine won't tighten and keep turning? They seem to be in there alright but just won't completeley tighten up

After seeing how you assembled the watch, may I ask if the sensors of the watch still functions after you folded the ribbon/ connector witn your tweezer?

@GiShockGo

5 жыл бұрын

Danilo 1310 yes luckily.... Have to be more careful though. Don't want to puncture or sperate and wires accidentally

How do you do the AC reset on the GW9400

I am getting puzzled: do you need a Panasonic CTL1616 lithium or a CTL1616F battery for a Tough Solar like Rangeman?

厉害

there were two extra tiny springs and two tiny boards or sensors or something that came out of mine, that you didnt put back in yours. im not sure where they came from.

Can you remove the negative film from the LCD screen when making watch from negative to positive?

@juarezintlanfranciscojoel393

Жыл бұрын

Si

I unplugged my sensor do I need to preform a AC reset for the sensor to work?

@GiShockGo

4 жыл бұрын

Kratos the barometer will be blank because it resets the barometric pressure data.

Good evening, I want to ask what happens when you open it with the waterproofing, is it still at 20 bar?

@GregSierra

11 ай бұрын

As long as you replace the gasket, make sure everything inside the watch is seated properly, and screw down the back plate correctly, the 20bar resistance should not be compromised.

Hi, I know this is an old video. But can you please tell me what battery is used in the rangeman? I think I might need to replace mine as it's not charging very well. Thanks

@pulkinpulman2028

Жыл бұрын

Ctl1616

@_GALLINA

Жыл бұрын

@@pulkinpulman2028 but in video (despite stickers says CTL1616), the battery is a CTL1616F !!

Dude just lift the white section of the socket to put the ribbon with no unnesesary force :)

@GiShockGo

5 жыл бұрын

maxpayneau hindsight is 20 20 lol... Now I'll know for next time. Thanks bud

Hey do you know if Jomashop.com is reliable sources to buy watches from?

@GiShockGo

5 жыл бұрын

Kratos yes they sell authentic watches, but no they're not a Casio authorized seller.

@kratos7678

4 жыл бұрын

Hello there! Have any spare parts for the Rangeman button assembly C clip?

😵‍💫

He almost butchered that poor sensor connector... 😢

Can’t get it to work any ideas on what I can do?

@GiShockGo

4 жыл бұрын

Kratos what’s wrong with it? What did you do?

@kratos7678

4 жыл бұрын

I opened it up to service the O rings on the watch so I disconnected the sensor and plugged it back in.

@kratos7678

4 жыл бұрын

It’s reading Err

@GiShockGo

4 жыл бұрын

Kratos it sounds like the sensor isn’t making contact. Make sure you close the hatch by pressing down on it after you push the sensor cable all the way in.

@kratos7678

4 жыл бұрын

Had no luck I’ll try again tomorrow. Thanks for the tip!

you are so rude to the ribbon 😭

I just need to replace the battery 😅