How To - Rear Drum Brakes and Wheel Bearings Replacement - SMART Automotive Solutions
Автокөліктер мен көлік құралдары
www.smartautomotivesolutions.c...
Tackling your rear wheel bearings and drum brakes is a job that anyone with basic tools and a bit of mechanical know how should be able to handle. But is is always helpful to be able to check out a comprehensive how-to video before/during the job. We put this video together for just this reason when we did the work on my mate Simon's Landcruiser 60 Series. This truck has over 600K on the clock and is Simon's daily drive, plus it doubles up as a backup vehicle and camera car for the Roothy DVDs. We had already rebuilt the front end and while we were there we checked out the rear wheel bearings and found some play, plus there was a more serious issue with the rear drum brakes. Hope you enjoy the video, there's more to come.
Пікірлер: 34
This guy's the best mechanical demo master I have encountered. Sorta like a big bruvver, but not so ruff.
Brilliant, one of the better instructional vids I’ve seen on this subject. Gives me a lot of confidence, cheers my man.
Awesome video.. really liked how much information was in this and the trick with the screwdrivers to get the hub lock nut out was great.. I bought a special tool for my GU when i had it lol.. Keep the videos coming.
Great vid showing the tricks, keep them coming. Loved ur build with roothy too.
@Functionalshitbox
6 жыл бұрын
Thanks mate, we are planning a full series of these vids, just takes time as we like to do it on real trucks.
3:16 "see the shi- stuff that came out of there?" 🤣
Good stuff, thanks Richard.
Love these types of videos.
good stuff mate, cheers
Great video!
This is super helpful much appreciated 🙏🏻
Thank you,good info.
Great video. Sub'd. Thanks!
Great tutorial.
Thank you mate.
great video whats the rust stuff you are using ?
Gday Mate very professional and informative video thanks ! I have the two locking screws on the drivers side hub burred, so I tried using screw remover no luck, then an ez out snapped off in each one ! Any thoughts on how to extract these two locking Phillips head screws mate ? Regards Craig
Hey Richard, Mate I have tried to find a video on how to adjust/replace a drum handbrake on 40 series landcruisers . If you get one in your workshop it would be good if you did a video on this as well maybe ? Thanks.
Would this be a full floating rear axle I guess?
Good job Aussies
If you guys want to do some more videos on a real truck. Could work out some things I need done on my 60 series if needed. Its getting a 12ht shortly so need some tips on removing vacuum like you did on Roothy's truck. Cheers, Liam
What kit did you use for the bearings, races and seals?
Do you have the video from the front end bearings etc? i need to do mine soon and a vid would be awesome to help! Just did the rear bearings and brakes thanks to this vid :D
@jackfrost-zu1hm
3 жыл бұрын
same here
Hi sir can u tell me , can I instilled rear Axel of Bj 75 troop Cary in 61 series land cruiser
@Functionalshitbox
2 жыл бұрын
Unfortunately not mate, the wheel track on a 75 series is not as wide as a 60 series also the spring perches are in a different position.
What do you mean nip them up? I thought as soon as there’s movement replace the bearings…
The Gordon Ramsay of Landcruisers
How close would this be to an US FJ60 rear brake assy?
@Functionalshitbox
2 жыл бұрын
The same I reckon👍👍
On the hun lock but mate
I thought the bearings needed more grease
not how you pack bearings
Mate your breathing says a lot, kindly go for a check up