I have a 93 XLT Blue interior, Bronco. I can't wait to do something like this internally. Great Job. Changing the internal lights to LED also really helped out.

@TheFixTech

9 ай бұрын

Giving these old trucks a deep cleaning really clears the old dusty odor. I’ve been meaning to upgrade to leds myself.

This process took a few days, but was well worth the time. The sound insulation works wonders on these older trucks! Highly recommended.

@RoseBaby

2 жыл бұрын

You did a fantastic job! It’s amazing how years of dirt and nasty stuff disappears in minutes.

@appletree69er

Жыл бұрын

Please! I gotta know where or how to get that upholstery for my 1995 ford bronco. I hate the boring grey interior in mine 😢

@Thrillsand

Жыл бұрын

How many boxes of the sound dead we did you use?

Great job. I did my mini van the same way. Took out the carpet and power washed the whole thing. Wife thought I was nuts. Turned out like new

Great job mate, without a doubt a pain to do but extremely satisfying when finished. Youngster helping worth praise. Keep on rocking!

i want to buy a bronco from you after you own it for a while and do all this amazing work!!

I can smell the freshness and hygiene through the screen .. WOW is the less word I can say it ... BRAVO and Well Done

@TheFixTech

Жыл бұрын

Thank you.

I just got a 94 Bronco and I love her soooooo much!!!!

@TheFixTech

Жыл бұрын

Nice! These trucks are fun to drive and work on.

Should add make sure anyone replicating this resolved all water intrusion otherwise that matting will absorb it and lead to rust under it.

Absolutely look forward to your videos. I have a 1990 bronco xlt and know little to nothing at all about it. Your content has been very helpful! Thank you.

Ngl great quality video. The camera angles were like perfect

Da-n you did a fine job. That is what I have to look forward to . I have a raged out 1986 that needs a lot of work . Thanks for the inspiration .

Nice clean Bronco, super video as always Fix.

Absolutely beautiful! I love the restoration and how you kept it oem!

Doing this to my bronco ii can’t wait

I have a 1992 XLT no rust 169,000 that one person owned before and is just really dirty. You have inspired me to get to work on it and clean it up. Just been sitting in my drive way for over a year. Awesome video thanks!

@TheFixTech

2 жыл бұрын

Take your time and give it a deep clean, took me about a week but was well worth it.

You - Are Really Good At What You Do !

I find myself landing back on your channel fairly frequently, love the bronco content man🤘🏻

@TheFixTech

Ай бұрын

Awesome! Thank you!

that was so satisfying

That’s a beautiful Bronco

@TheFixTech

2 жыл бұрын

Thank you.

you do EXCELLENT work. kudos.

Love your channel, learn so much about my bronco.

@TheFixTech

Жыл бұрын

Thank you.

Pretty sweet!

Very nice 😎

I used carpet die to re paint mine Grey I got it from detail kings looks like new it gave it that new carpet look not a the faded clean look, but yours looks great

4.38 .....сказано, - ЧО!!! И шпион провалился"😂😂😂😂

Great vid . Interior looks cherry . Great job . Thanks for sharing .I am working on a ragged out 1986 bull nose Eddie Bower with a lot of trim missing .

@kennchowchicken

2 жыл бұрын

Looks great! Got an 82, bout to start same project but can't decide on spray or mat deadening. Just curious why you chose mat, and how effective it was for you after instal?

Great video, any footage of before and after the sound deadening mats inside the car?

thank you.

Looks amazing! Thanks for the list in the description. What degreaser did you use?

Got me an 84 recently. Thinking of taking up the floor this weekend

@TheFixTech

2 жыл бұрын

Be sure to clean under the carpet throughly, and add any sound deadening/or extra jute padding. It’s well worth it.

I have same Bronco in black , I didn’t have to remove the rear pant at all, just pulled on the wheel well carpets and they came off.

Sorry about the audio. I had mic issues with this video, plus it was very windy

@RoseBaby

2 жыл бұрын

Great job! That’s so satisfying to watch! 😃👍🏻💪🏻

Wow man that is so sick all that all that soundproofing is pretty impressive. I can imagine you used a bunch of it I remember getting my truck 10 years ago and taking all the trim and seats out to do a deep clean but wow you spared no crack or crevice there buddy ~95BroncoXLT 5.0 E4OD/456 gears lim slip frnt&rear And just a tip in case you don't already know watch out for all the wires that can get chafed and create a short. a lot of them are on circuits that include the transmission. So if it ever goes into limp mode on you out of the blue, it could be your third brake light/ it could be the wire running horizontally above your windshield; behind the head trim (sharp metal trim) or the wire your around your dome light

I got to thinking maybe this guy should work at a detail shop looks like he found his his calling.

How on earth did you cut the butyl sound deadener so accurately? I have lots and lots of triangular/small pieces to fill the odd shapes. End result is the same but looks really nice the way you got everything cut so well and used big pieces mostly. Halfway through the same job myself on my 94 Eddie Bauer.

Love your videos. Any tips on replacing the seat bolts? And or treating the bolt holes with anything to prevent corrosion?

@TheFixTech

5 ай бұрын

Are the bolts rusted in place? Soak them in penetrating oil for a couple days. If they break off you will have to drill them out, then use stainless nuts and bolts with lock washers.

Cherry! Great job on the truck and very nicely done video description. Headliner looks good as new - is that stock or did you upgrade? I replaced the fabric on mine last year and the bond already failed (high temp upholstery spray adhesive) Will try contact cement and roller next time

@TheFixTech

Жыл бұрын

It is the stock liner, has a small sag next the the lamp. I keep the windows up most of the time as the wind usually accelerates the sagging.

Do you have a good recommendation for replacement trim screws and trim and door panel clips for the bronco?

Super helpful video! Looking to do the same with my recently acquired 91 Eddie Bauer. Any tips on replacing the headliner? Mine is pretty torn up

@TheFixTech

6 ай бұрын

If the headboard is good then you can purchase just the material and 3m adhesive spray. Remove the headboard out of the truck and rip off the cloth headliner, clean and apply the adhesive and new material. Or you can purchase a new headboard with headliner pre applied from ACME interiors. I will be doing the latter as my head board is slightly damaged.

What kind of decreaser did you use

Did one work better than the other? I want to do the same to my bronco. Just curious which one you thought worked better. The foam or the shiny one for sound deadening.

Thanks for the inspiration, I am about to clean my dad's old Bronco and do the same. Do you recommend any carpet cleaner, I was thinking of just using purple power. Thanks again.

@TheFixTech

2 жыл бұрын

Yes, any degreaser would work good, just be sure to dilute (don’t use full strength, too hard to completely remove soap)

The black Noico is 8mm and the white one is 2mm?

@TheFixTech

4 ай бұрын

The 80 mil (butyl) is 2mm and the 150 mil (foam) is 4mm, they do sell an 8mm foam

So for reinstalling seats did you need to cut holes in the dynamat for the seat holes?

@TheFixTech

Жыл бұрын

Yes, you can see the holes from the bottom of the truck, just poke through with a screwdriver.

Nice job. Only thing I would do differently would be to cut fuel pump access hole in floor. Much easier than dropping tank

@TheFixTech

Жыл бұрын

Thanks

I bet the first time you take the family to a fast food joint someone will spill a soft Drink it's just the way it happens I detail my car's and it's a constant struggle keeping them clean

Like the work you did is that Bronco for sale

@TheFixTech

Жыл бұрын

Thanks.

Did you put the foam underneath the overhead trim to reduce noice from vibrations? I’m going to do be doing my carpet and interior in my ‘95 soon. Awesome video and great job on cleaning!

@TheFixTech

2 жыл бұрын

Yes, anytime you have plastic and metal meet there will be some noise, especially on these trucks since they are a harsher ride.

@matthewmartin5274

2 жыл бұрын

@@TheFixTech awesome I’ll keep that in mind. Did you do that on all the interior panels?

@TheFixTech

2 жыл бұрын

@@matthewmartin5274 Yes, and I like using the foam as it is lightweight.

@matthewmartin5274

2 жыл бұрын

@@TheFixTech thanks man. Thank you for the video and for the replies!

Do you use a regular high pressure washer for the mats? My 89 bronco could use a wash 😬

@TheFixTech

2 жыл бұрын

Yes, gas powered 2400 psi, use a wider pressure bit angle as to not damage the carpet. Anywhere between 2000-3000 psi cleans good.

How much of everything did you order? Me and my son are doing a 1987 Bronco just like yours. I would like to use what you did. Can you tell me how much of each you used so I can duplicate what you did. Thanks so much

@TheFixTech

4 ай бұрын

You’ll need about 150sq ft, that’s with doing the doors

Really weird question but, i'm having a super hard time getting the HeadLight knob to come off, you know you pull it for the lights to come on, the wiper knob will pull off easy so i'm not sure what i'm doing wrong, any pro tips?

@TheFixTech

Жыл бұрын

Turn the knob until you see a slot opening in the black plastic, inside that slot you will see a metal retainer. Hold the knob in place then Use a small flat head screwdriver and slide that metal retainer backwards, slide out knob.

Did you use hog rings to connect the rear seat back to the foam? if not, how does it look? Thanks

@TheFixTech

2 жыл бұрын

Yes, I was able to carefully reuse the original hogrings (did not cut them off). Was tricky and time consuming but well worth it. The seats need the hog rings. To make it easier buy a set of hog ring pliers and a box of hogrings. I used needle nose pliers, but again took forever.

@M1ST3RHYDE

2 жыл бұрын

@@TheFixTech yeah, I cut mine before checking to see if I still had my H.R. set. Of course It is missing. The interior is coming out very nicely, suck a great different.

What was the total cost for the insulation? I have the identical Bronco and this is on the check list for the next project

@TheFixTech

2 жыл бұрын

About $200-$250, I used the noico brand as dynamat would have cost much more. 4 36sq ft boxes of the butyl should do the truck. I used 3 boxes of butyl and 1 box of foam. I added links to the description.

I got a 89 bronco, the back seat is super heavy. I always take it out the back tho. My bronco is all rubber on the inside on the ground part, and the top part is just painted metal. No carpet or anything. Bought it this way, don’t know if that’s normal.

@TheFixTech

2 жыл бұрын

That is normal for the Bronco XL, some people convert to the rubber style carpet as it is more durable.

What size pressure washer you using for PSI?

@TheFixTech

Жыл бұрын

My pressure washer is rated at 3000 psi, but that is too much, only 2000 is needed for a good clean.

I guess if you got the time and you got the money you're all good is the truck for sale I'll buy it.

@TheFixTech

Жыл бұрын

I’ve got a nice engine upgrade project planned for this truck, I will be replacing the rear main seal (motor installed) first then will film the upgrades I’m planning. Maybe this fall.

What was the brand name of the rear hatch mat?

@TheFixTech

2 жыл бұрын

Weathertech

What's the P.S.I power washer u useing

@TheFixTech

Жыл бұрын

Mine is a 3,000 psi, it is too strong and recommend 2,400-2800

if i tried to do this to my 95 f150 im pretty sure 90% of the clips for paneling would break.

@TheFixTech

21 күн бұрын

I’ve had to buy lots of clips

You missed a spot