(Not responsible if your wing breaks!) Hope you guys enjoyed! Share, like, and subscribe!
Жүктеу.....
Пікірлер: 92
@genesisgalletti98424 жыл бұрын
Gonna do this to my fit ASAP ! Thankyou for this resourceful video🙏🏻
@charleenmachado566 Жыл бұрын
My hero I been trying to mod my Honda for and I felt like I wasn't getting anywhere but saw this , thank u so much
@tonythecarfreak
Жыл бұрын
Glad I could help!
@rjechols20594 жыл бұрын
Thanks for the tip bro! Will be doing this when I re clear my wing 👏
@Sgt75bravo3 жыл бұрын
Wow that is a pretty nice and easy mod…Thanks for the info 👍🏾
@tonythecarfreak
3 жыл бұрын
No problem!!
@rezboadog3692 жыл бұрын
I tried this but couldn't figure out the right screws, so I propped it up using some thicker lugnuts around the four clips :P Thank you for this video, it made me do it! Dope Fit btw, you got me looking at exhaust and wheels now.
@tonythecarfreak
2 жыл бұрын
Thanks for watching glad I could help man!
@knoxbom32743 жыл бұрын
Smart and cheap too can't beat that...I like the stock wing on mine
@tonythecarfreak
3 жыл бұрын
Yes sir! Thanks for watching!
@benprins77652 жыл бұрын
Awesome video thanks man!
@tonythecarfreak
2 жыл бұрын
Thank you for watching!
@thomasoliver5834 жыл бұрын
Great video dude, planning on doing this!
@tonythecarfreak
4 жыл бұрын
Thank you
@OfficialHour13Entertainment3 жыл бұрын
This is bad ass bro.
@treble773 жыл бұрын
i have the same ride. thanks homie from michigan
@56321books2 жыл бұрын
Had to sub cause you on it!
@Aphtayte13 жыл бұрын
That was good tip bro
@Herosdad3 Жыл бұрын
Great ideas, but I would recommend always use two nuts on each bolt instead of one - better lock with no movements.
@mdhalas2 жыл бұрын
Plastic prying tools, like the tools for opening a cellphone, might work for this and make it a little more peace of mind than using a screw driver. Maybe trim removal tools.
@retrosabor52352 жыл бұрын
What type and size bolts did you use the ones I have around here do not fit
@carpioamaya29773 жыл бұрын
Thanks 🙏🏼
@jsmith19123 жыл бұрын
What size are those screws and bolt
@ShodaiTakumi2 жыл бұрын
Use a cloth so you don't scratch your paint *Launches painted part onto concrete*
@tonythecarfreak
2 жыл бұрын
😂😂😂thing has a lot of pressure at release
@treble773 жыл бұрын
that looks siiick
@tonythecarfreak
3 жыл бұрын
Thank you
@markgabriel69342 жыл бұрын
Actually you only need 2 which is the 2 at the end the 2 middle ones go in deeper than 2 at the end..and also you'll need 2 longer screws for the top cause the original ones will not catch if you use a longer screw..I used a 1/4 diameter by 1 1/4 inch screw to lift it up..but be careful not to break the catch screw wholes on the top they break easily but you should be good if only one breaks mine is held on by one but it's fine just give a good tugging to make sure it's nice and tight
@tonythecarfreak
2 жыл бұрын
What I did worked just fine but thanks for the info
@thisisme2340 Жыл бұрын
Such a good idea man! Will hopefully be doing this, this week sometime. Do you have a recommended website for wheels? I really like the ones you have on
@tonythecarfreak
Жыл бұрын
Thanks, and honestly Fitment industries will be your best bet for wheels
@davidgarcia60952 жыл бұрын
Hey! Junior what is the link to get does wheels
@Digitals3 жыл бұрын
Nice job man! Pretty ingenious to use a bolt/nut combo to prop the wing up. Does it bounce around at all or is it secure?
@tonythecarfreak
3 жыл бұрын
Not at all it stayed steady for months under high speeds! never had a problem!
@b_dard
Жыл бұрын
@@tonythecarfreak when you say months, is it because it loosens on the long run? could also look into nylon jam nuts.
@tonythecarfreak
Жыл бұрын
@@b_dard I said months because I sold the car months after doing this
@pablocrvzz29853 жыл бұрын
Thanks for the idea but you should consider the rain 😉
@tonythecarfreak
3 жыл бұрын
I'm sorry but why should I consider the rain? It's been perfectly fine no issues
@pablocrvzz2985
3 жыл бұрын
@@tonythecarfreak those are allot of holes jus wondering if the rain gets in any time at all
@wilfridogonzalez26302 жыл бұрын
Hola que zise son tus rines por favor
@papi-champoo60333 жыл бұрын
Add another nut for a lock nut so that it doesn't adjust with vibration.
@tonythecarfreak
3 жыл бұрын
That's a good tip!
@MCAQUIN04 жыл бұрын
What exhaust do you have on the beautiful machine?
@tonythecarfreak
4 жыл бұрын
Thank you, it's just a muffler delete to dual DC sport tips!
@brookehenderson48603 жыл бұрын
Post more Honda Fit 🙏🏼
@tonythecarfreak
3 жыл бұрын
Sorry I sold the honda fit
@ATALIG232 жыл бұрын
You think this method will also work on 07-08 Honda Fit Sport (GD3) they come with spoiler from factory as well, Thanks
@tonythecarfreak
2 жыл бұрын
If I told you I knew I'd be lying! But doesn't hurt to give it a try!! Just becareful with damaging the paint
@annmikeejarmel55773 жыл бұрын
hiiiii i like your tail light. i also have honda fit. where did you bought your tail light??? Thank you!
@tonythecarfreak
3 жыл бұрын
They are stock taillights thank you!
@iz5442
3 жыл бұрын
yours might be the ge6 1.3. it’s tail light is different
@ih8suvz3 жыл бұрын
What kind of wheels are those? They look good.
@tonythecarfreak
3 жыл бұрын
Thanks they are xxr 531
@ShaiyanHossain2 жыл бұрын
any issues with the wing moving around going over bumps or on the highway?
@tonythecarfreak
2 жыл бұрын
No not at all
@rysa105664 жыл бұрын
yo you stay near broward? i got a fit too abit of a fit freak myself @ryerysa
@kariskarisdunya74043 жыл бұрын
Could you tell me what kind of exhaust do you have ?
@tonythecarfreak
3 жыл бұрын
It's a muffler delete, to dual 2.5 inch tips
@curtisoverholt9054 жыл бұрын
Any issues opening the hatch fully ?
@tonythecarfreak
4 жыл бұрын
No sir , none at all
@implayaz92 жыл бұрын
What are the specs on the long screws?
@kalidell3137
2 жыл бұрын
I know it was long ago but the bolts I used were m5-.80 x 30 and used 2 m5 nuts per bolt
@Silver-Surfer973 жыл бұрын
Do you remember the size and length of those bolts?
@kalidell3137
2 жыл бұрын
I know it was long ago but the bolts I used were m5-.80 x 30 and used 2 m5 nuts per bolt
@HondaJazz808
2 жыл бұрын
@@kalidell3137 lol thank you I was looking for a comment like this
@jayrivera5545 Жыл бұрын
I have a 07 honda fit would it work like your car
@tonythecarfreak
Жыл бұрын
To be honest I'm not sure but you can give it a shot
@micahjarvis88092 жыл бұрын
What are the list of parts again?
@tonythecarfreak
2 жыл бұрын
Screws that fit into that slot and nuts that screw onto the screw
@teddy.bear.19383 жыл бұрын
Hi i got the same car and i love ya rims what size ?
@tonythecarfreak
3 жыл бұрын
Thanks brotha those were 15x8 +35 offset
@heisenberg27282 жыл бұрын
What size is your rims and tires?
@tonythecarfreak
2 жыл бұрын
15x8 195/50/15
@bluejay13902 жыл бұрын
What is the spoiler called and where can I get it
@tonythecarfreak
2 жыл бұрын
It comes with the sport edition Honda fit
@dunce2373 жыл бұрын
I’m assuming this mod isn’t compatible with the 1st gen fits correct?
@tonythecarfreak
3 жыл бұрын
If I'm completely honest with you, I'm not too sure about that...
@dunce237
3 жыл бұрын
@@tonythecarfreak right on, ty for the reply brotha!🙏🏼
@mcdudehouse76137 ай бұрын
Didnyour mpg drop at all?
@tonythecarfreak
7 ай бұрын
Not at all if anything I got more mpg since I rode slower
@lythex96463 жыл бұрын
what size screw did u use?
@tonythecarfreak
3 жыл бұрын
I honestly don't recall I'm so it was a long time ago. I explained it in the video
@GK5_
2 жыл бұрын
@@tonythecarfreak but you didn't explain the size?
@tonythecarfreak
2 жыл бұрын
@@GK5_ I explained to use the stock one to get a rough estimate. It doesn't have to be exact just snug enough to fit inside the clips
@gecko_juice32693 жыл бұрын
No water going inside the trunk door ?
@tonythecarfreak
3 жыл бұрын
No sir it was never leaking
@gecko_juice3269
3 жыл бұрын
@@tonythecarfreak tanks 👍👍👍
@djinkentertainment2 жыл бұрын
Too bad that won't work on a chevy sonic rs lol.
@tonythecarfreak
2 жыл бұрын
Haha yea I have a lt sonic now
@djinkentertainment
2 жыл бұрын
@@tonythecarfreak wait what lol? How did you do that lol? I've received a message from you a while back about you selling the fit and that you regretted it lol.
Пікірлер: 92
Gonna do this to my fit ASAP ! Thankyou for this resourceful video🙏🏻
My hero I been trying to mod my Honda for and I felt like I wasn't getting anywhere but saw this , thank u so much
@tonythecarfreak
Жыл бұрын
Glad I could help!
Thanks for the tip bro! Will be doing this when I re clear my wing 👏
Wow that is a pretty nice and easy mod…Thanks for the info 👍🏾
@tonythecarfreak
3 жыл бұрын
No problem!!
I tried this but couldn't figure out the right screws, so I propped it up using some thicker lugnuts around the four clips :P Thank you for this video, it made me do it! Dope Fit btw, you got me looking at exhaust and wheels now.
@tonythecarfreak
2 жыл бұрын
Thanks for watching glad I could help man!
Smart and cheap too can't beat that...I like the stock wing on mine
@tonythecarfreak
3 жыл бұрын
Yes sir! Thanks for watching!
Awesome video thanks man!
@tonythecarfreak
2 жыл бұрын
Thank you for watching!
Great video dude, planning on doing this!
@tonythecarfreak
4 жыл бұрын
Thank you
This is bad ass bro.
i have the same ride. thanks homie from michigan
Had to sub cause you on it!
That was good tip bro
Great ideas, but I would recommend always use two nuts on each bolt instead of one - better lock with no movements.
Plastic prying tools, like the tools for opening a cellphone, might work for this and make it a little more peace of mind than using a screw driver. Maybe trim removal tools.
What type and size bolts did you use the ones I have around here do not fit
Thanks 🙏🏼
What size are those screws and bolt
Use a cloth so you don't scratch your paint *Launches painted part onto concrete*
@tonythecarfreak
2 жыл бұрын
😂😂😂thing has a lot of pressure at release
that looks siiick
@tonythecarfreak
3 жыл бұрын
Thank you
Actually you only need 2 which is the 2 at the end the 2 middle ones go in deeper than 2 at the end..and also you'll need 2 longer screws for the top cause the original ones will not catch if you use a longer screw..I used a 1/4 diameter by 1 1/4 inch screw to lift it up..but be careful not to break the catch screw wholes on the top they break easily but you should be good if only one breaks mine is held on by one but it's fine just give a good tugging to make sure it's nice and tight
@tonythecarfreak
2 жыл бұрын
What I did worked just fine but thanks for the info
Such a good idea man! Will hopefully be doing this, this week sometime. Do you have a recommended website for wheels? I really like the ones you have on
@tonythecarfreak
Жыл бұрын
Thanks, and honestly Fitment industries will be your best bet for wheels
Hey! Junior what is the link to get does wheels
Nice job man! Pretty ingenious to use a bolt/nut combo to prop the wing up. Does it bounce around at all or is it secure?
@tonythecarfreak
3 жыл бұрын
Not at all it stayed steady for months under high speeds! never had a problem!
@b_dard
Жыл бұрын
@@tonythecarfreak when you say months, is it because it loosens on the long run? could also look into nylon jam nuts.
@tonythecarfreak
Жыл бұрын
@@b_dard I said months because I sold the car months after doing this
Thanks for the idea but you should consider the rain 😉
@tonythecarfreak
3 жыл бұрын
I'm sorry but why should I consider the rain? It's been perfectly fine no issues
@pablocrvzz2985
3 жыл бұрын
@@tonythecarfreak those are allot of holes jus wondering if the rain gets in any time at all
Hola que zise son tus rines por favor
Add another nut for a lock nut so that it doesn't adjust with vibration.
@tonythecarfreak
3 жыл бұрын
That's a good tip!
What exhaust do you have on the beautiful machine?
@tonythecarfreak
4 жыл бұрын
Thank you, it's just a muffler delete to dual DC sport tips!
Post more Honda Fit 🙏🏼
@tonythecarfreak
3 жыл бұрын
Sorry I sold the honda fit
You think this method will also work on 07-08 Honda Fit Sport (GD3) they come with spoiler from factory as well, Thanks
@tonythecarfreak
2 жыл бұрын
If I told you I knew I'd be lying! But doesn't hurt to give it a try!! Just becareful with damaging the paint
hiiiii i like your tail light. i also have honda fit. where did you bought your tail light??? Thank you!
@tonythecarfreak
3 жыл бұрын
They are stock taillights thank you!
@iz5442
3 жыл бұрын
yours might be the ge6 1.3. it’s tail light is different
What kind of wheels are those? They look good.
@tonythecarfreak
3 жыл бұрын
Thanks they are xxr 531
any issues with the wing moving around going over bumps or on the highway?
@tonythecarfreak
2 жыл бұрын
No not at all
yo you stay near broward? i got a fit too abit of a fit freak myself @ryerysa
Could you tell me what kind of exhaust do you have ?
@tonythecarfreak
3 жыл бұрын
It's a muffler delete, to dual 2.5 inch tips
Any issues opening the hatch fully ?
@tonythecarfreak
4 жыл бұрын
No sir , none at all
What are the specs on the long screws?
@kalidell3137
2 жыл бұрын
I know it was long ago but the bolts I used were m5-.80 x 30 and used 2 m5 nuts per bolt
Do you remember the size and length of those bolts?
@kalidell3137
2 жыл бұрын
I know it was long ago but the bolts I used were m5-.80 x 30 and used 2 m5 nuts per bolt
@HondaJazz808
2 жыл бұрын
@@kalidell3137 lol thank you I was looking for a comment like this
I have a 07 honda fit would it work like your car
@tonythecarfreak
Жыл бұрын
To be honest I'm not sure but you can give it a shot
What are the list of parts again?
@tonythecarfreak
2 жыл бұрын
Screws that fit into that slot and nuts that screw onto the screw
Hi i got the same car and i love ya rims what size ?
@tonythecarfreak
3 жыл бұрын
Thanks brotha those were 15x8 +35 offset
What size is your rims and tires?
@tonythecarfreak
2 жыл бұрын
15x8 195/50/15
What is the spoiler called and where can I get it
@tonythecarfreak
2 жыл бұрын
It comes with the sport edition Honda fit
I’m assuming this mod isn’t compatible with the 1st gen fits correct?
@tonythecarfreak
3 жыл бұрын
If I'm completely honest with you, I'm not too sure about that...
@dunce237
3 жыл бұрын
@@tonythecarfreak right on, ty for the reply brotha!🙏🏼
Didnyour mpg drop at all?
@tonythecarfreak
7 ай бұрын
Not at all if anything I got more mpg since I rode slower
what size screw did u use?
@tonythecarfreak
3 жыл бұрын
I honestly don't recall I'm so it was a long time ago. I explained it in the video
@GK5_
2 жыл бұрын
@@tonythecarfreak but you didn't explain the size?
@tonythecarfreak
2 жыл бұрын
@@GK5_ I explained to use the stock one to get a rough estimate. It doesn't have to be exact just snug enough to fit inside the clips
No water going inside the trunk door ?
@tonythecarfreak
3 жыл бұрын
No sir it was never leaking
@gecko_juice3269
3 жыл бұрын
@@tonythecarfreak tanks 👍👍👍
Too bad that won't work on a chevy sonic rs lol.
@tonythecarfreak
2 жыл бұрын
Haha yea I have a lt sonic now
@djinkentertainment
2 жыл бұрын
@@tonythecarfreak wait what lol? How did you do that lol? I've received a message from you a while back about you selling the fit and that you regretted it lol.
@tonythecarfreak
2 жыл бұрын
@@djinkentertainment yea I Regret selling the fit