Steps: Sand down edges. Peel up edge to expose sanded part. Cut. Then sand down the cut edges. Subscribe for more skate tutorials! #shorts #skatebasics #skateboarding
Жүктеу.....
Пікірлер: 22
@RegularJason27 күн бұрын
Steps: Sand down edges. Peel up edge to expose sanded part. Cut. Then sand down the cut edges. Subscribe for more skate tutorials! #shorts #skatebasics #skateboarding
@DonyThimskit
25 күн бұрын
Aren’t you supposed to cut away from yourself in case you cut too far or something
@RegularJason
25 күн бұрын
Cutting away from yourself probably does reduce the chance of getting hurt if you're putting a lot of force into the cut, and your blade slips. (Ideally, sanding the edge will make it so you don't have to put much force into the cut). But yes, cut away from yourself if you feel safer that way, and for the younger skaters out there, ask a friend/family to help if needed
@DonyThimskit
22 күн бұрын
@@RegularJason so it’s personal preference ig
@Solomolo2583925 күн бұрын
You missed an important part. That’s making sure the blade isn’t dulled out. If it’s dull even with everything else correct, you’ll end up with very choppy cutout.
@markprice2225
25 күн бұрын
I used a used blade and finally said F it and put a new blade on. I find the hole process easier if you lay your grip flat in the sun while you get roller & knife
@hydromc251325 күн бұрын
This was my favorite part of building my first deck when i was 15. Best feeling ever looking down and seeing something i put together myself
@ghostfakekiller420123 күн бұрын
Never cut towards yourself, brah!
@Jonathan-jq5cl
20 күн бұрын
Have you ever set up a board bruh
@yumemda23 күн бұрын
im convinced jason is secretly handler ( a popular fps youtuber )
@markprice222525 күн бұрын
Use a grip roller or sometimes i use a 4" 🎨 roller, lay down the grip flat in the sun to get out any wrinkles while you get everything ready. I usually pull back half the grip @time and start kinda in the middle and roll out
@user-qv7xt8zo5j23 күн бұрын
nice
@JessicaStrickland25 күн бұрын
I prefer to start by wrapping my entire body in grip tape
@Blud_on-ytシ25 күн бұрын
𝚃𝚑𝚊𝚗𝚔 𝚢𝚘𝚞❤
@ethnn.22325 күн бұрын
I love doing shitty grip jobs just because it pisses my friends off so much. And to all the people saying don’t cut towards yourself, as long as you aren’t a moron it’s fine lmao
@wesleywood671225 күн бұрын
Shop at your local skate shop.
@Carmine-qk7bi
25 күн бұрын
I don’t have one
@THEactualJkinc8825 күн бұрын
Never cut towards yourself blade 101 😅
@CplgLockoma25 күн бұрын
Skip the second step and all the rest. Just file down the tape till it comes off. Stop wasting time on nonsense
@zacharylovesyou25 күн бұрын
don’t cut towards yourself!!
@ColdSandwich20025 күн бұрын
i cringe at skaters cutting griptape, you guys always cut dangerously close to your body
@vinceibarra455325 күн бұрын
When cutting.... "towards your buddy not your body!"
Пікірлер: 22
Steps: Sand down edges. Peel up edge to expose sanded part. Cut. Then sand down the cut edges. Subscribe for more skate tutorials! #shorts #skatebasics #skateboarding
@DonyThimskit
25 күн бұрын
Aren’t you supposed to cut away from yourself in case you cut too far or something
@RegularJason
25 күн бұрын
Cutting away from yourself probably does reduce the chance of getting hurt if you're putting a lot of force into the cut, and your blade slips. (Ideally, sanding the edge will make it so you don't have to put much force into the cut). But yes, cut away from yourself if you feel safer that way, and for the younger skaters out there, ask a friend/family to help if needed
@DonyThimskit
22 күн бұрын
@@RegularJason so it’s personal preference ig
You missed an important part. That’s making sure the blade isn’t dulled out. If it’s dull even with everything else correct, you’ll end up with very choppy cutout.
@markprice2225
25 күн бұрын
I used a used blade and finally said F it and put a new blade on. I find the hole process easier if you lay your grip flat in the sun while you get roller & knife
This was my favorite part of building my first deck when i was 15. Best feeling ever looking down and seeing something i put together myself
Never cut towards yourself, brah!
@Jonathan-jq5cl
20 күн бұрын
Have you ever set up a board bruh
im convinced jason is secretly handler ( a popular fps youtuber )
Use a grip roller or sometimes i use a 4" 🎨 roller, lay down the grip flat in the sun to get out any wrinkles while you get everything ready. I usually pull back half the grip @time and start kinda in the middle and roll out
nice
I prefer to start by wrapping my entire body in grip tape
𝚃𝚑𝚊𝚗𝚔 𝚢𝚘𝚞❤
I love doing shitty grip jobs just because it pisses my friends off so much. And to all the people saying don’t cut towards yourself, as long as you aren’t a moron it’s fine lmao
Shop at your local skate shop.
@Carmine-qk7bi
25 күн бұрын
I don’t have one
Never cut towards yourself blade 101 😅
Skip the second step and all the rest. Just file down the tape till it comes off. Stop wasting time on nonsense
don’t cut towards yourself!!
i cringe at skaters cutting griptape, you guys always cut dangerously close to your body
When cutting.... "towards your buddy not your body!"