As a professional plumber of 20 years, this tool is indispensable. I use it a lot and is great for emergency repairs. No need to wait around for pipes to drain. Love this tool!

@eddye4833

3 жыл бұрын

So are you recommended to buy this tool

@vinnygoombatts1458

3 жыл бұрын

@@eddye4833 yup

@purehitman24

2 жыл бұрын

@@eddye4833 yes

@purehitman24

2 жыл бұрын

@@eddye4833 if you're doing a lot of copper and aren't working by the hour it's a lifesaver I bought 4 sets of a different brand for my guys to have. Spent almost 5 grand but after they got the hang of it they paid for themselves in a week.

@kai6424

Жыл бұрын

What do you think about shark bite?

Architect here. We use this system in Germany for 25+ years on copper, stainless steel and galvanized steel piping. Never encountered a leak and very easy to use.

@simonschertler3034

5 жыл бұрын

Pressfittings on steel pipes have been used in Europe since 1969. Pressfittings for steel are similar to this made of copper. Viega adapted the steel pressfittings to copper in 1995.

@jbjoe249

4 жыл бұрын

Are you using Viega or? I have used once Hertz fittings and I am not been satisfied with it. You can remove metal part from fittings and make mistake during pressing. I was using it on alupex. In Croatia I was doing with alupex but in England because of rats I'm using copper.

@callmeishmael7452

4 жыл бұрын

eaglevision993 hey thanks! Architect here, learning about using this system for my own home. Very glad to get your note of confidence.

@maradona-xf4mc

4 жыл бұрын

Please I want come to America to study plumbing who are know you any cuminaty college in usa

@js4187

4 жыл бұрын

@@maradona-xf4mc NO . Stay where you are .

I've used the Pro Press system, at my job, since 2002. You cannot beat it! I recall a particular incident, where I had to replace a leaking 1.25 gate valve, in a system where the water could NOT be shut down. I cut the valve off (took a huge soaking) slid the new valve onto the pipe, in the open position, so it wouldn't blow-off, and crimped that puppy on...shut valve, cleaned up water...DONE!

@Got2Learn

3 жыл бұрын

👌👌👌

Top notch video- the cutaway shots, the detail views, the ‘mistake’ shots, the repeated connections, sound on !, ,lots of examples too. You are natural teacher sir.

@Got2Learn

4 жыл бұрын

Thank you for appreciating my videos! Thats what i do it for!

@seventwenty4569

4 жыл бұрын

@@Got2Learn Thank you for great videos! Unlike others, your videos are always worth the time wasted on KZread commercials :)

@ryannelson2211

4 жыл бұрын

I agree top notch cut away and examples

I just purchased a Rothenberger ProPress. The experience has been 110% positive. The very first job was 1-1/4" copper in a high rise building where the water just wouldn't stop coming. I got soaked from head to toe doing the job as the water poured out from above, but, the job got done! (the building manager said the last plumber just stood around for four hours and waited for the building to drain, which added $600 to his bill, and at the end-of-the day the pinholes still weren't fixed) I installed two Tees and two couplings in about 30mins which is 1/4 of the time it would take to solder. The only drawback so far is my supplier keeps very low inventory of Propress fittings for 1" and up. Hopefully that changes as they continue to catch on in Canada.

@Got2Learn

4 жыл бұрын

That's awesome, I love hearing positive stories like yours. If you do alot of that stuff, it'll pay for itself after 2 or 3 jobs, than it's easy money for you ;)

@titirititiri6360

2 жыл бұрын

Problem is, their is a rubber o ring, that o ring will fail , rubber corrode. Now try getting that tool in tight places,

@redranger518

2 жыл бұрын

Rothenberger is propress?

the fact that you can use it on a line full of water is the biggest selling point imo... great for repair work

your plumbing videos are absolutely the best on the Internet! I really appreciate all the hard work and dedication to detail you do for these presentations.

@Got2Learn

3 жыл бұрын

Thanks a million Doug, really appreciate it 🤗

@cannonplumbinganddrainllc4221

2 жыл бұрын

this guys a dork

@lanlan8280

Жыл бұрын

The best and honest presentation .

Couple of tips for these Pro Press tools: If your battery dies mid press, absolutely do not move the tool while changing the battery. If the tool moves even a little, and you try to press again, that fitting will leak. For your marks for slip couplings, take either a stop coupling or a 90 to get your mark then press your slip to that mark. And dont press connections too close together, especially 1 1/2 pipe and up. The press actually crimps the pipe as well and if you press fittings too close together it'll have a higher chance of leaking.

@Got2Learn

5 жыл бұрын

All good advice here, thanks a lot for your input!!!

@robpendola5888

9 ай бұрын

1/2" to 2" it is important to keep the hexagonal deformation on the press. 2-1/2" to 4" it doesn't matter. Milwaukee won't feather and will reset, Rigid tools you can feather the press

Milwaukee pro-press kit $2000 for 1 inch to 1/2 inch pipes! Out of reach for most of us weekend warriors with a leaky pipe or a new bathroom! Your video's are the best!

@r7boatguy

Жыл бұрын

With the cost of plumbers in my area, it will pay for itself in a couple of jobs!

@petebusch9069

3 ай бұрын

It is spendy but considering what plumbers charge it looks like if you crimp about 24 fittings this tool will pay for itself. You can also buy a used one and then sell it, you might even make money on the tool.

It's great if you're a plumbing/ HVAC contractor. It's a huge savings in labor costs. Being a mechanical insulation contractor, though, these systems increase my overall material and labor costs by 12-15% .(Mostly labor) Every fitting has to be oversized. On soldered piping the pipe insulation would squeeze right over the coupling fitting. (Every 10 feet) on mains. Now we have to oversize the insulation by one size to fit over the fitting decreasing output substantially. On chilled water systems these oversized fittings need to painted with a vapor barrier mastic to prevent sweating. To all you contractors out there, take care of your subs.

@koreyphan

Жыл бұрын

Great point that’s commonly overlooked

Great video. I use a REMS AKKU Press. The 1/2" inch (15mm) fittings are competitively priced against other fittings such as pushfit, but the price jumps when the size is 3/4" (22mm). Not a tool for tight areas such as under kitchen sinks, but REMS sell a 45 degree head to allow better access. A very neat finish which is secure and leak free, with no heat required.

@Got2Learn

4 жыл бұрын

Yes indeed, not for under sink applications but great for so many other things, specially with that 45 degree adaptor ;)

Like these videos. Very informative, educational and always to the point. No excessive narration or filler.

@Got2Learn

5 жыл бұрын

My pleasure man, glad you liked it, don't forget to subscribe and share, it helps a lot :)

Under the list of pros & cons , you overlooked 1 very important factor. Safety! Transportation of flammable gas bottles incorrectly can be hazardous, if not fatal if not done correctly. I still remember news worthy articles of plumbing vans exploding like a land mine in my local news paper when I was an aprentice , being pointed out by my father , as he read the paper on a Sunday morning. Lets not take that for granted.

@Got2Learn

3 жыл бұрын

Very true, thanks for adding that!

About a year ago I rented this tool from a local company to use on a commercial system. It worked great and I would recommend it.

@Got2Learn

4 жыл бұрын

Absolutely!

@AJJaeJones

4 жыл бұрын

Thanks

Great video! I'm shopping for a propress gift for my plumbing husband. Thanks

Been using the "Mega-press" for BIP about 5yrs now. So fast, easy prep for the helper, and i dont have to lug a threader onto a rooftop!

@Got2Learn

3 жыл бұрын

Amazing product, gonna make a video about it this summer 🤘

Great video. DIY homeowner here and I'm about to pull the trigger on one of these for two upcoming hybrid water heater installations that involve repiping. Expensive it is but it will save me a lot of headaches and stress... DIY not to save money but to do it right.

@lewis94uk

Жыл бұрын

Nothing wrong with DIY as long as you do the correct research and know when you are out of your depth

@rickybobby7276

5 ай бұрын

@@lewis94uk The only time you are out of your depth is when you give up.

@petebusch9069

3 ай бұрын

The tool is expensive but considering what plumbers charge its actually one of the easiest tools to pay for itself. One or two jobs and its paid for, that and you can buy a used one and then sell it for what you paid. Or just rent one if available.

I use to work at a place where we repaired Hot Water/Heating systems.. We had a Pro Press and I really was impressed. It works well in tight quarters. Also Is was it was great when there was water in the lines .. Downside is the price.. But the company paid for it. All in all I think it’s awesome

@Got2Learn

3 жыл бұрын

💯💯💯

Not our fittings but that doesn't take away anything from this being a really great video! Kudos. ☺

Excellent presentation. I had heard about this new system. I have sweated many pipes and made every mistake mentioned. The verbal and video presentation was clear and about the best youtube learning video I have ever seen.

@Got2Learn

2 жыл бұрын

Wow, thank you so much Charles, I really appreciate that, have a great evening!!!

I appreciate how well you explain everything! Love watching your videos! Thanks!

I’m a plumbing and heating apprentice and studying level 3. I’ve never done pressfit looks ok but I’d still prefer solder but my new employers use this method. Good video to learn from 👍

@Got2Learn

4 жыл бұрын

Congrats! Yeah ProPress is slowly taking the lead but a lot of companies still solder their copper, but it's good to know how to do both, cheers!

@danlux4954

Жыл бұрын

How long do the o-rings last?

Excellent informative video! We used pro-press on some 1-1/4 copper chiller lines that carry glycol/water mix. No problems after several years yet.

@Got2Learn

3 жыл бұрын

Awesomeeeee 🤩🤩🤩

@Linetworks

9 ай бұрын

As long as the mix isnt too pure i had a whole house leak

@toml802

9 ай бұрын

We use less than 50%@@Linetworks

as a bonus, You can turn the propress fittings BUT if you do more than a 1/4 turn you must recrimp It is recommended to keep certain distances between 2 fittings ( refer to the viega specs ) It is recommended to keep a certain distance between the propress joint and the copper weld you will do if you do any ( flush valves, soldered 3/8" valves ) refer to the viega specs It is recommended to crimp couplings on 2 different axis as to try to keep the copper line as straight as possible. AND take your time, sometimes in small areas YOU must precrimp certain fittings or else you wont have access with the propress gun to crimp them.

@robpendola5888

9 ай бұрын

always have to repress propress after rotation, every single time no matter what

@TheBostonstapler

9 ай бұрын

@robpendola5888 if I remembrr correctly it's past 1/4 turn. It was written in the ridgid / viega manual . Sometimes there is a slight movement in the crimp which is normal.

@robpendola5888

9 ай бұрын

@@TheBostonstapler If you purposely rotate it,then you have to repress Viega ProPress fittings every time. Unlike MegaPress Viega fittings which are a natural swing joint. Never rotate a ProPress fitting under pressure, don't put a wrench on the fittings, and keep that hexagonal press shape. I can't speak for other press fittings, only Viega which is ProPress. I am a technical trainer for Viega

@TheBostonstapler

9 ай бұрын

@robpendola5888 I understand, but it happens once in a while the fitting even when crimped, there is a tiny bit of movement in it. What I'm saying is that this is normal.

As a plumbing contractor for over 20 years, I can tell you this tool (I prefer the M12, it's smaller), can be a life saver. However, like any other tool it's NOT the silver bullet. Fittings DO leak when not crimped properly and many times you cannot get the tool in tight spots, also the very first fitting I crimped leaked! The tool was brand new and didn't work properly, so I had to have it serviced. It would have costs $826.00!! But luckily Milwaukee fixed under warranty at NO cost. Overall, I love it, but still have to solder sometimes.

@Got2Learn

4 жыл бұрын

Yeah Vinny, it has it's ups and downs, but when you need it, it's fun to have ;) thx for passing by ;)

@nelsonechevarria7009

4 жыл бұрын

"$826.00!!" for servicing the tool?See this people?This is why I rag on milwaukee.On top of all of the money this poor guy spent on that milwaukee press tool it failed him and if it hadn't been because the press tool was still under warranty this poor guy would have had to spend "826.00!!" that he probably needs for other things such as food and such.

@vinnygoombatts1458

4 жыл бұрын

@@nelsonechevarria7009 I know right? You can buy a new one with no jaws or battery for close to that price.

@alexveitia6909

3 жыл бұрын

Nelson Echevarria Poor guy? He must not be that poor if he can afford a specialty tool like a propress. He invests in his future and his livelihood. With the time and money that tool makes and saves you, you can fork out $826.00 It’s not chump change but it’s not a lot in the great scheme of things. It is BS how it failed on the first use but nothing is perfect and the percentage that this happens to must be very low.

@nelsonechevarria7009

3 жыл бұрын

@@alexveitia6909 Yes,I say "poor guy" because what if the company hadn't given the guy a new press tool or fixed the one he bought from them in the first place?As far as "With the money that tool makes and saves you,you can fork out $826.00" that is debateable because I recently bought not one but two press tools from China,the first press tool cost me $1,120.00 and the second press tool which is more compact and comparable to rigid's rp-200b which is the one that I wanted in the first place cost me $910.00.I'm a home owner but back in the day when I was young I learned plumbing from licensed contractors and licensed plumbers.Now I do my own home repairs if and when ever possible and I also occasionally do repairs for people that I know.My point which you clearly missed is how insanely expensive milwaukee and rigid sell their press tools for,have you taken a look at how insanely expensive the press jaws are as well?I have used my press tools already and I will say that the press tools are a great asset and time saver but there is no reason what so ever for companies such as milwaukee and rigid to fleece people especially when they have their press tools made in China then have the press tools shipped here to the U.S. and rip people off.rigid press tools come with a lifetime warranty but the lifetime warranty comes with humongus catches and considering that the press tool costs $2,500.00 and up plus how insanely expensive extra press jaws are I call total bullshit on both rigid and milwaukee."Oh,I have milwaukee/rigid press tool."So big fucking whoop what?Do you think your pipes give a shit what brand press tool you have or where you bought the press tool from?"Oh,you have to buy viega press fittings.",another horse drawn cart of pure unadulterated bullshit because I bought JW copper press fittings and they're just as good as the "viega copper press fittings" without the extra "viega" cost.I learned long ago and the hard way that expensive doesn't always mean that you get the most for your hard earned money.You mention SharkBite and I'm glad that you did because although SharkBite fittings are good I would not trust SharkBite fittings enough to install them in a wall then close the wall up.Maybe the SharkBite company has changed their policy but at no time have I ever read or heard that SharkBite fittings are meant as a permanent repair solution.Thanks for sharing.

You and Roger are the best plumbing video channels. Thank you for all the free content

@Got2Learn

3 жыл бұрын

👌👌👌🙏

We have soldered copper plumbing that is almost 125 years old in our old farm hours....no problems. I wonder if those rubber O-rings will do as well....

@raymondrobbins9495

Ай бұрын

That is neither here nor there i have had soldered joints leak after 5 years and i have sharkbites that have not leaked in 10. so there is always room for problems is all i am saying. You can always get a bad joint with solder press or push to connect.

I love the tool It’s not for everything, but is a life saver in certain situations Has gotten me home at a reasonable hour several days by being able to transition to pex to temporary the water on for a customer after my guys chip through a line at the end of a day. Always happens on the ones the customer is living in the remodel

@Got2Learn

4 жыл бұрын

Hehe yeah true ;)

Awesome video man I been really interested in this sytem, just recently got my m12 Milwaukee pex expander and really love that think ill stick to that for now but this definitely would be really handy for certain jobs that have to be done in copper.

Buddy of mine just came today to fix some copper pipes in front of my house he used this same method I was blown away how fast everything was done makes me want to get into plumbing 😂

@petebusch9069

3 ай бұрын

You would think a plumber would charge less considering the job can be done very fast now but they use the tool as an excuse to charge more.

Awesome video! Never seen or heard about this type of system before. Very informative! Love the cut fittings for good demonstration.

@Got2Learn

3 жыл бұрын

Glad you enjoyed it John, thank you!!!

If you don’t know which machine to buy check out this link www.plumbingmafia.net/pro-press

@Got2Learn

4 жыл бұрын

I am more of a Milwaukee guy but they are all good :)

@plumbob6399

4 жыл бұрын

Got2Learn I have all 3 machines and rigid is my favorite because of how neat and clean it presses. Everything else I buy milwaukee

I absolutely love pro press. I use it mostly on commercial property’s for the simple fact that most business can’t go long with out water. It’s such a time saver. If at all possible can you do a review on pro pressing gas lines? Thanks and thanks again for another awesome video.

@Got2Learn

4 жыл бұрын

Pro press is awesome man, thx again for the comment Richie!!!

@kennethcargill3512

2 жыл бұрын

Please don't use this on a house. They have made repairs on mine super expensive as a home gamer.

@givennameidk4515

2 жыл бұрын

@@kennethcargill3512 why is that

Thank you! Extremely enlightening and well done. I think “Professional” is the correct word!

Great review you covered all my questions in one take!⭐⭐⭐⭐⭐

Clearest videos and no beating around the bush! BEST kudos to you.

@Got2Learn

Жыл бұрын

Thanks 👍!!!!!!

@artyzinn7725

Жыл бұрын

@@Got2Learn My pleasure, do you have videos on how to remove the Propress fittings? Thank you!

@Got2Learn

Жыл бұрын

@@artyzinn7725 you can't remove them ;)

A plumber came to do some emergency furnace work in my basement. His sharp eye spotted a bad copper fitting on my water heater, which I would have normally done myself, but he was there so I asked him to do it. He used the Ridgid version. The repair went so fast I didn't believe he could have been done. So he showed me the ProPress and it blew me away. I had never heard of it. I wanted one, but when I saw the prices I almost passed out. But I did find a hand tool, a hydraulic press for 1", 3/4", 1/2" for the DYI guys. Got good reviews. So if you're still drooling over the Milwaukee or Dewalt, like I am, the hydraulic hand tool smoothed me out like my morning Oxycontin. But I'm still dreaming that Milwaukee or Dewalt will give me one of theirs, like the DEWALT DCE200M2K 20V.

@BudgetYarnReviews

2 жыл бұрын

What hydraulic hand tool did you buy? I'd love to get one of those

This is absolutely the best plumbing channel 👍

@Got2Learn

5 жыл бұрын

Wow, I feel very special right now :)

@gus473

5 жыл бұрын

@@Got2Learn You do explain this, and most plumbing techniques, very well! 👍

@abdelkadebenelhadjdjelloul9121

4 жыл бұрын

This machine is really great

Great Video!! Excellent thorough Review and demonstration . Thank You for this effort

@Got2Learn

3 жыл бұрын

Glad it was helpful!

That’s a great tool!! You are the best plumber ever in the whole job site!!!!!!!

@Got2Learn

5 жыл бұрын

;)

Truth is nothing is better than a soldering job done by a professional

Helpful information, thank you for sharing !!

@Got2Learn

5 жыл бұрын

My pleasure man, glad you liked it, don't forget to subscribe and share, it helps a lot :)

Awesome video. Straight forward and covers everything

Got my first job tomorrow with the pro press really appreciate the content.

Been using these for 10 years and swear by them, had a handful of leaks over thousands of presses, obviously takes the skill out of it but when you're pressing up to 108mm it's nice to have that peace of mind.

@alemgas

10 ай бұрын

What skill, soldering? My 11years old granddaughter can solder pipes stop trying to make it sound like rocket science

I dont even do plumbing but this is one of my fav channels LOL

@Got2Learn

3 жыл бұрын

Woooohooooo thanks 🤘🤘🤘

Really great video. I had never heard of Pressing pipe and this explained it really well. Thanks!

@Got2Learn

2 жыл бұрын

🤘🤘🤘

Very nice video and I like how you cut the pipes as a cutaway to show the inside

@Got2Learn

5 жыл бұрын

Thanks man, quality over quantity :)

Nice, informative video...like your others. One point you don't address that other videos skip, too: The cleaning of the outside of the pipe. While I guess it's not necessary, I'd still feel better if the outer surface of the adjoining pipe contacting the fitting was wiped down with SOMETHING before the rubber mates with it. Certainly couldn't hurt and wouldn't take all that long, either. Strange.

We used this on 4" for a bit of the mains on a hotel we did. Pretty cool stuff. PS you can rent the tool for large jobs and return it when you are done.

@Got2Learn

5 жыл бұрын

Yeah that's also a good option.

This is the best channel for plumbing I have learned so much. If you did an electrical channel for residential I would love you.

Thank you so much, ill be using it in a few minutes for my job ❤🎉thanks for the great video and the awesome explanation ❤❤

@Got2Learn

10 ай бұрын

🙏🙏🙏

In NYC we still use copper lines as per city regulations. However im seeing more of these crimp systems being implemented. I'm still a fan of soldered connection, but you can't argue with the speed and convenience of a crimp fitting.

@Got2Learn

5 жыл бұрын

Yeah the speed is it's strongest point.

Thank you ,I learned new stuff today

@Got2Learn

5 жыл бұрын

Thanks buddy!!

Been using pro press to do some runs at my house lately, with a hand crimper, so easy to do

Excellent video! Thank you for making this for people.

@Got2Learn

4 жыл бұрын

My pleasure Ken, I really enjoy doing so :)

I want one of these so bad. I’m not a plumber but i love tools and ever since I saw a plumber use one I want one

I use a Uponor tool with press heads depending on each use; Uponor for flex pipe, viega or vsh for copper, bonfix for copper to flex etc. Works great and is a lot less expensive to buy. The brand Uponor is a sister brand of Makita.

@gus473

5 жыл бұрын

Uponor products ARE great, and it does seem to be a case of "you get what you pay for" (it's pricey).

@sstorholm

4 жыл бұрын

I'm not quite sure what you're on about, Uponor is a Finnish publicly traded company that manufactures pipe systems, and is in no way related to Makita. Uponor might have tools made by Makita rebranded for their use.

@nelsonechevarria7009

4 жыл бұрын

It would have been very helpful if you had given a web link or price as some sort of indicator because "a lot less expensive to buy" makes no sense without some sort of reference point for comparison.If you earn $250,000.00 per year and I only earn say $50,000.00 per year then your phrase "a lot less expensive to buy" is not going to mean the same thing to me as it does to you.I Iooked up that "Uponor" and from what I saw as far as the pricing of their press tools they are just as insanely priced as Milwaukee and Rigid press tools are.Look at this,for one set of 1/2" uponor replacement inserts they want $225.95.: www.supplyhouse.com/Wirsbo-Uponor-D6270500-1-2-Replacement-Insert-for-MLC-Mulitpress-Manual-Press-Tool-10972000-p that's just for one 1/2" set of inserts,and those inserts are only for a manual pressing tool,if they charge that much for a set of 1/2" inserts I'd hate to see how much they charge for the manual press tool itself,are they smoking crack-cocaine?To Milwaukee's credit they only charge $175.99 for a Milwaukee 1/2" m18 standard copper press jaw.: www.supplyhouse.com/Milwaukee-49-16-2650-1-2-M18-Standard-Copper-Press-Jaw You must be earing plenty big money to be able to call any of that "a lot less expensive to buy".

Ordered mine this week, can’t wait to get it into the field!!

@-Enrico

3 жыл бұрын

Same here, went with Ridgid though.

The explanation is clear enough, great job!

@Got2Learn

4 жыл бұрын

Thank you very much! !

@j.georgealmendarez5061

4 жыл бұрын

You're welcome, greetings from Hesperia Ca. USA

Thank you, I feel less prepared to do this job myself now. lol Plumbers are expensive and you never know when or if they will have time.

As DIYer I love these new tools and fitting coming out. I enjoy taking on plumbing projects but always hated soldering. I'm not bad at it but sometimes the work area is too tight and seems too dangerous for a blow torch. Hopefully the price comes down after a couple years. Great video!

@Got2Learn

4 жыл бұрын

Yeah pro press is the way to go for so many reasons, thx for your comment Mike ;)

@89Ayten

2 жыл бұрын

I have a small section of fiberglass welding blanket i use when i have to solder in a tight spot to protect the surroundings.

@johnbeckwith1361

Жыл бұрын

If you are a DYI'r don't use this. Buy Expansion Pex

@owen5630

6 ай бұрын

that’s what soldering blankets are for

@rw501

5 ай бұрын

Rental is 156$ for a day at sunbelt. Edit* I saw the dewalt kit.

Good explaiation. Thorough, complete and to the point. No wasted time.

@Got2Learn

3 ай бұрын

Glad you liked it!

@Got2Learn

Ай бұрын

Thank you, don't forget to share, it really helps the channel!

great job demonstrating the use of the tool, I don't like soldering copper so now I will just crimp it!

@Got2Learn

3 жыл бұрын

🤘🤘🤘

Very informative. Wondering how long pro-press fittngs are expected to last?

propress is a godsend for commercial work. Just pressed in a 3 inch valve for a hotel in no time. If i had to solder it would have been a pain the ass overhead 12 feet up.

@Got2Learn

5 жыл бұрын

Exactly!

As a plumber for a day... yes.. I am a master plumber.... I love this. In fact, I bought the Dewalt Expansion tool and all uponor fittings and now uponor makes these press fittings so I bought some to convert from copper to pex before I rip it all out and just run pex from the main line (when I get to that, I am not sure but I want to replumb the house with a tankless heater and manifold)

Excellent video, clear, concise and informative!!

@Got2Learn

3 жыл бұрын

You are most welcome, please share if you can, it helps the channel tremendously ✌✌

Never seen one, not that I'm a plumber anyway. I'm convinced they could clamp that using a hand bolt-cutter type device rather than a $$$$ battery tool. Not like you couldn't squeeze copper when you could break hardened steel. Just a thought, personally I'd prefer to solder fittings.

Wow, your video quality is absolutely monstrously gigantic. Your attention to detail is huge, your informativeness is astounding. 8:25 what's that big grey thing?

@Got2Learn

4 жыл бұрын

Hehe, thank you very much. The grey thing is a torpedo level ;)

@shermanhammock9914

2 жыл бұрын

A torpedo level

Propress is a game changer. Even of you only ever press on pex adapters any professional plumber knows it is worth every penny.

@Got2Learn

4 жыл бұрын

It sure is ;)

i've had to replace leaking copper fittings and had to drain the whole system on 2 different occasions. the water just kept flowing and flowing and flowing, lol. not saying i would shell out the money for this very expensive tool if i had to do it again, but it's great to know there is something like this available out there in case i need it for a non-emergency or a big job that pays for it, thank you for making the video!

@Got2Learn

2 жыл бұрын

🤘🤘🤘

Very helpful and interesting tutorial even though I may not have the chance to use it.

@Got2Learn

3 жыл бұрын

Thank you so muchhh!!!

Yea see this in all plumbers. Its good. We even do some in the sprinkler side. Never done one myself tho

Thank you for the video, our shop has been using press for a few years, some love it, some hate it.

@Got2Learn

5 жыл бұрын

Yeah not everyone likes the idea, but for some it's a life changer :)

@inodoroguerrero

5 жыл бұрын

@@Got2Learn I do not like it for everyday use but it can be a game changer on shut downs.

@Got2Learn

5 жыл бұрын

Yes, exactly!!

Love these videos. Extremely informative and useful. Thank you

@Got2Learn

4 ай бұрын

You are so welcome!!!

I never realized how bad i was at soldering water pipes, until i had to solder caps from removing hot water coil. Definitely failed on soldering, so i pulled out company's propress. Lol!! Hvacr tech. 0 leaks from brazing.

@nelsonechevarria7009

4 жыл бұрын

Or you could have used ball valves with comppression fittings or SharkBite caps if it was a temporary thing.

@nelsonechevarria7009

4 жыл бұрын

"Smoke 'em if ya got 'em."

@nelsonechevarria7009

4 жыл бұрын

Now that you mention it I'm going to have to install ball valves,unions and a bypass line from my hot water coil pipe because the hot water coil is piped to the cold water inlet on my water heater so if my hot water coil ever gets clogged I'm going to need ball valves to shut off the water to the hot water coil,unions to disconnect the hot water coil and a bypass line to divert the water from the hot water coil directly to my water heater until I can order a new hot water coil for my boiler.Gee,isn't owning a home loads of fun?NOT!!!On the bright side,if you can call it that,a new hot water coil for my boiler would only cost me $250.00 (last time I checked.) plus the shipping and tax,that's if I do the work myself.If I call a contractor or plumber to do the work I don't even want to discuss it or think about it because it gives me a terrible headache and a big pain in the wallet.

Kid from germany here: Im working since 6 months and in any application/construction sotw we habe never ever seen anybody not use propress. I asked why we dont solder things and they told me that in germany we dont solder things since more than 10 years

@lobotomyy

5 жыл бұрын

@Maximus Decimus Meridius i hope ur not right bcuz that will be alot of work :D

@JaredFunari

5 жыл бұрын

Maximus Decimus Meridius actually Europe has been using press fittings since about 1956. They are warrantied for 50 years.

@jaimerascon9805

5 жыл бұрын

@Maximus Decimus Meridius job Security my friend just like THE new cars.

@evenflow3256

5 жыл бұрын

Nice tool, I guess it's better than soldering in the residual flux in the water supply after soldering.

@strangeroamer3219

4 жыл бұрын

You're lucky. Here in the US propress is expensive. We still have to solder fittings. It sucks.

I seen other videos, yours are more well described. Thank you. Already subscribed.

I just got me one and it saves so much time plus you can work with it with a small leak of water

Watching this video again I just noticed that the JW brand copper press elbows have more of a sweep than the viega copper press elbows,that's interesting considering that the viega copper press elbows cost more than the JW brand copper press elbows.

Aaaaand another good video! Keep 'em coming! Soon 75k!

@Got2Learn

5 жыл бұрын

Thanks Dimitri, I prefer saying 100k soon ;)

Excellent video! Everything ( and something more) that I wanted to know!!!

@Got2Learn

2 жыл бұрын

Glad it was helpful!!!

Very well explained. Thanks a lot.

Great vid, had never seen these before until last year. A contractor installed them and there were 6 very very small leaks which sealed themselves after a few weeks and remain dry. Contractor was called back but said that sometimes some water "shelters" in the fittings :-)

@Got2Learn

4 жыл бұрын

Hmmm....interesting.

@Affordablebath_remodel

3 жыл бұрын

never had a drip yet.

The tool is pretty expensive but if i have lot of jobs to do,I would buy it. There are some installation spots, we definitely we need it

thank you for SHOWING what it does. That other plumbing youtuber (Roger Wakefield) just talked about it and never showed how it works, just kept the thing in its case, and blabbed on and on.

@Got2Learn

8 ай бұрын

🤣👌

Wow, the fact that you needn't drain the pipes is a great feature. This looks like a great way to install systems.

If you are just doing a few fittings and want to keep it simple just use swagelok or yor-lok tube fittings. Fittings are a little expensive but the ease of installing is very nice. You don't need fancy equipment - just some wrenches.

@Got2Learn

5 жыл бұрын

Are those similar to compression fittings?

@cjgetreal

Жыл бұрын

@@Got2Learn Yes they are compression fittings

Great video..I work on Hvac systems and wouldn't trust a tool like this on those systems but plumbing system looks good but I dont do enough to justify the cost

@Got2Learn

4 жыл бұрын

Thanks! Yeah, for big plumbing contracts this tool is awesome ;)

Ive had my propress for 1 year already and absolutely love it. You don't need to calibrate it frequently, and I can use it while water is on if I need to. I can just press on a ball valve, close the valve, and good to go. No leak, everything is great. Spent $3k for all my attachments, and tool. And any issues, Milwaukee will be able to replace or fix for free.

@Got2Learn

5 жыл бұрын

It's 50,000 cycles before the calibration

@sykeABOVE

5 жыл бұрын

@@Got2Learn I've had it for a year and have done more than 50k cycles. Haven't got it calibrated once.

Been waiting for this one!

@Got2Learn

5 жыл бұрын

Sweet!

Pro Press systems work slick as snot, although the fittings are expensive!

@Affordablebath_remodel

3 жыл бұрын

yes, but the speed is worth the extra cost.

I just had a spigot replaced and the plumber used these fittings to come from the riser. I had NEVER heard of these and was only aware of soldering for my all copper house piping. He was in and out VERY quickly. But I am still a little bit concerned about the O ring wearing out. I guess only time will tell and lawyers, if or when they deteriorate. It might be good to come up with a metal O ring material that is exactly the right size and soft enough or flexible to 'weld' to the pipe when under pressure and crimped. Check with Area 51 which might have it.

@danlux4954

Жыл бұрын

Maybe you can solder after its installed?

Good day, this looks amazing, I know you said that the pro press can be used in an industrial setting ,the crimp can withstand air pressure ( even hospital oxygen tanks,i assume) of about 200PSI which is roughly 13.7 bar for us. In an industrial setting at which soldering is dominant, especially in the medical gas oxygen cylinder system in hopspitals that use condensers & vaporisers connections using Cu pipe. in your opinion could this be acceptable in that environment? Thanks,

Very helpful. Thank you for your time making the videos. Dave

@Got2Learn

3 жыл бұрын

My pleasure :)

Looking at this I really wonder if a good old copper compression fitting will not have a longer life.... And also does not require a hot work permit. I would use those only for copper repair, for anything new, I am an Uponor Propex Expander guy.....

@bjornmarley5670

2 жыл бұрын

Fittings have just a 10 year guarantee...

@ziegle9876

2 жыл бұрын

@@bjornmarley5670 Depends on the quality: The FORGE™ range of DZR brass screwed, flared & compression fittings are perfect for potable water, natural & LP gas applications. All fittings are fully compliant to AS3688, carry the Watermark approval and are backed by the FORGE™ 25 Year Lifetime warranty.

Hopefully for a homeowner it will be a rental tool in the future. I would use it to fix many copper pipes in my home.

@Got2Learn

5 жыл бұрын

Good point, but those press fittings are pretty expensive.

@nationalsergio

5 жыл бұрын

@@Got2Learn they are expensive, indeed. But on the other hand you have homeowners using shark bite fittings. So...

@adl6067

4 жыл бұрын

@Guy Fawkes-Day here in USA you can rent it in Ferguson plumbing stores

@adl6067

4 жыл бұрын

@Guy Fawkes-Day no problem, hope you get done all your projects 👍

I enjoy watching that and I appreciate that. That's one of the most useful videos I watched these days on youtube.

@Got2Learn

2 жыл бұрын

Glad you enjoyed it!!

@alirezaalemrajabi3328

2 жыл бұрын

@@Got2Learn I'm an expert on hydraulic systems and piping. If you need help with that, just let me know. It's my honor to help you, Sir.

Check around for different brand of fittings, here in Europe normal residential size fittings are around 3-4 EUR each if you go for the brand name Geberit Mapress stuff, some like Sahna are even cheaper.