I have been shocked at the times I've saw people nearly ruin there vehicle placing a jack in the wrong spot. Good Video

@TonyTheTechnician

4 жыл бұрын

Thank you 👍

Hey! I own a 92 camaro and am looking at trying to fix her up back to a shiny glory, runs and drives and has actually survived the times very well, but there always something to be improved! very eager to watch and learn from your videos as the come through, please keep it up! subsribing!

@TonyTheTechnician

7 жыл бұрын

Clayton Bagley thank you im really glad you enjoy the videos. also i hope you really enjoy your new car. and thanks for your support

@oldsrocket8841

4 жыл бұрын

How is your Camaro project going thus far.

Thanks for this, only I got a Firebird. Firebird, Camaro, same thing. Upgraded from 4th gen to 3rd gen and wanted to make sure I was putting it in the right spot.

@TonyTheTechnician

2 жыл бұрын

Thanks for watching 👍 enjoy the new car

Good video. I always back the jack stands up by also using 8x8 blocks of wood. Have seen 3 guys crushed after the jack stands shifted or the jack stand weld failed. Saw another guy crushed when his factory made ramps failed. I'm always amazed that some people buy the top name tool but the economy brand jack and jack stands. Yes, I know they usually work. But I always ask them how much their life is worth. Too late to change an accident after it happens. I've seen life ended or severe lifetime injuries because of economy equipment. Thanks for the video and always remember safety.

@TonyTheTechnician

7 жыл бұрын

Snap Mac i completely agree with you. it's always best to be as safe as possible. especially when it comes to something like this. why not go the extra step to protect yourself. I think any extra steps in protecting yourself is worth the time. thanks for the tip as well. Oh and thanks for watching!

nice job very good pointers for safety keep up the good work

@TonyTheTechnician

7 жыл бұрын

Gary Clemons thank you! And thank you for watching

I just bought an 89 camaro for my first project car. Very useful thanks

@TonyTheTechnician

3 жыл бұрын

Very nice. Glad you enjoyed

@backyardbuck6362

2 жыл бұрын

89 was a good year. Hope you still have and taking good care of her. Have fun and be safe.

very nice video man

@TonyTheTechnician

7 жыл бұрын

Themechanicman92 thanks bro

It's actually really convenient you using yoyr 3rd gen, I'm trying to put my 3rd gen on jackstands, I almost was going to put them on the pinch welds since there are dents where they'd go

@TonyTheTechnician

Ай бұрын

Ya you can but I suggest using a pinch weld adapter on the jack or jack stands

@nightowl2210

Ай бұрын

@TonyTheTechnician yeah, I was going to find a spot on the frame that would keep the jacks as wide as possible since it'll be on em for a bit

i also have a 3rd gen and was doing it from the side. seemed alittle sketch so i stopped

watever pinch wale is i did tht on my camaro bent the frame . im like oops 😂

I have a 1500 ram and work on 2500's and 3500's trucks with that 3ton jack and stands

@TonyTheTechnician

7 жыл бұрын

Richard Cowtails well ya as long as they aren't over 6000 lbs then you fine lol. I suppose I should have just said the weight limit. Sorry about that man. thanks for watching

Hey man I have a 92 camaro I wrecked the front how do I get the front radiator core support off and put a new one?

@TonyTheTechnician

3 жыл бұрын

Once you unfortunately the raditiator support up top pull the radiator and you can see the bracing mount points you can unbolt the x brace but then the bottom support might be solid and need cut out

@aaronvargas3980

3 жыл бұрын

@@TonyTheTechnician Dam ok bro appreciate the help!

I saw this video and I was like I dont need to watch that I know what to do but even knowing what to do doesnt mean your gonna do it, ive dropped my truck a couple times due to loose wheel spacer lugs and the jack shifting positions.. You can never be too safe when lifting a vehicle.

@TonyTheTechnician

6 жыл бұрын

Yoda Doug thank you and ya I know what you mean. You can never be to safe when climbing under a few thousand pounds. Thanks for watching and commenting!

@Toyotas_n__Tools

6 жыл бұрын

TonyTheTechnician for sure man! I'm excited to see your car come along ill message you on Insta and you can see my junk 😜

Hi Tony iam putting a 5.3 in my 1991 camaro 3.1 fuel pump is 255 walbro so do I have change the original camaro fuel filter or is the stock one thanks

@TonyTheTechnician

4 жыл бұрын

I have done some reading and not many mention the filter but some say they upgrade to the one on hawks Motorsports and then some bought the wix filter for a 99 vette part number 33737 but I'm an not 100% sure.

@1983z28camaro

4 жыл бұрын

@@TonyTheTechnician thanks Tony

@1983z28camaro

4 жыл бұрын

Hi Tony I need your help I have just put the 5.3 lm7 and 4l6e in the 1991 camaro.with hawks mounts and transmission pan the car one not the truck but the trans pan is right against the engine cross member is this normal or what should I do thanks

@TonyTheTechnician

4 жыл бұрын

@@1983z28camaro the engine oil pan close to the k member or the transmission pan close to the tans cross member? I'm guessing your talking about the engine oil pan and in that case they are usually pretty close I think I can roughly fit a finger in between them

@1983z28camaro

4 жыл бұрын

@@TonyTheTechnician transmission pan

In my City cinder blocks are used by wheel robbers and they work 🤣🤣🤣

@TonyTheTechnician

3 жыл бұрын

🤣🤣🤣

@backyardbuck6362

2 жыл бұрын

This makes me feel so blessed, living in the sticks. 😆

@jamesortuno6846

Жыл бұрын

You mean "cylinder blocks"

fart can muffler XD

@TonyTheTechnician

7 жыл бұрын

Kyle Parker lmao i know right. I bought the car and the previous owner when I was buying it told me all about the car and told me it had a custom Exhaust. lmao then he showed up with this Exhaust on 😂😂😂