How to program used ABS module on 2015 Ford F150 using Forscan
Автокөліктер мен көлік құралдары
Check out my social media!!!!!
Snapchat- / javin
facebook- / regzastar
Insta- / nietojavi
Tiktok-www.tiktok.com/@jvfix?lang=en
=====================================================================
Hi guys welcome to my channel i have been working on cars my whole life and now that i have accumulated tons of experience and knowledge i want to share it with you.
I upload new videos every week stay tuned!!!!
Thanks for watching, please like and subscribe and god bless you!!
Disclaimer: JVFIX assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. These videos are only for educational purposes and i am not responsible for ANY INJURIES OR ACCIDENTS, DO IT AT YOUR OWN RISK!!!
Пікірлер: 27
Very straightforward. No non-sense presentation. So helpful. You’ll save lots of $$$ to many people. Kudos to you.
@JVFIXLLC
2 ай бұрын
thanks
Excellent
@JVFIXLLC
7 ай бұрын
Thanks
Hi which version of forscan are u using I have a 2015 escape
Great info, did you use j2534 for this? & would the jbox work on 2011 fords? Thanks!
@JVFIXLLC
4 ай бұрын
yea the j2534 box works from 1997 to the present year. for all makes and models
Good day, i have a mustang 2012 5.0 Boss superchager also having abs unit fault same as your F150, we installed used abs unit. we also have paid forscan subscirption, but upon running the ABS as built format, theres no data apearing to be saved. and tried to press Load factory as build, did DL anything. it only say Operation succesful. also there's no ABS configutation options on our part, compairing on yours what do you think is the problem TY
@JVFIXLLC
Ай бұрын
do you have any codes stored?
Which conector are you using, maybe it appear the extra conection because you have the VCI or ids
@JVFIXLLC
3 күн бұрын
i use an Autel j2534 interface but you can get the cable cheap on amazon or going to the official Forscan website
I am trying to install a used ABS module from Pick n' Pull. Should I remove the faulty one first and install the used one?
@JVFIXLLC
2 ай бұрын
yea just install the used one and do a as built restore with forscan and it should work
I am trying to do this on a 2013 F150. We have put in a used ABS module, and I have managed to follow you video until the "configure module" part and I don't get the window to change the VIN number all I get is one line that the hill start assist is enabled. Any ideas? Thanks Joe
@JVFIXLLC
3 ай бұрын
are you using forscan or the dealership software FDRS OR IDS
@rv4flyer
3 ай бұрын
I’m useing forscan. Just downloaded it this week
@JVFIXLLC
3 ай бұрын
@rv4flyer ok did you buy the subscription too. is like 12bucks if u didn't buy u will have too.
@rv4flyer
3 ай бұрын
@@JVFIXLLC No, I just have the free trial. I will pay for the software if I have to. Does it make a difference on what the software will do?
@JVFIXLLC
3 ай бұрын
@rv4flyer yes if u don't pay the 1yr sub it will not work
Why do you have to download and install the factory version of the software?
@JVFIXLLC
2 ай бұрын
is just the way is designed there is no other way.
What was the error code originally?
@JVFIXLLC
Ай бұрын
water damage in the module pins was the issue and that's why it was replaced