How To: Program A Hayward Super Pump VS
Learn More about Hayward Super Pump VS: www.inyopools.com/Products/022...
SUBSCRIBE for FREE swimming pool care and maintenance videos
every week: bit.ly/SubscribeINYO ****
VISIT our blog for weekly swimming pool tips, tricks, and more! bit.ly/InyoBlog
SHOP at our online store! bit.ly/InyoPools
LIKE us on FACEBOOK! / inyopools
FOLLOW us on TWITTER! / inyopools
FOLLOW us on INSTAGRAM! / inyopools
JOIN our circle on GOOGLE+ plus.google.com/+Inyopools/posts
Пікірлер: 142
That is a great tutorial! Just installed on a customer's pool, we always use Pentair. But this customer was insisted on Hayward. And as usual the instruction book is miserable. This made programming very easy!
@Inyopools
2 ай бұрын
Awesome!
For old people this is hell to operate!
@michtig
Жыл бұрын
For young people too. This thing was designed by some of the most incompetent engineers ever. Such a poor, unfriendly design. It's a terrible user experience.
@fhoxiegold8210
Жыл бұрын
Trust me I’m 24 nd I’m lost as well
@pjkellogg45
Ай бұрын
I agree…mine brand new installed yesterday and today display went off and can’t get it back on…
This setup is a huge pain in the rear. Thank you for explaining it so clearly.
@Inyopools
23 күн бұрын
Happy to help!
Very helpful for my Hayward NSF-50, thanks !
Thank you! So much better than the manual!
@Inyopools
11 ай бұрын
Glad it helped!
Great. Needed this. Very clear
Thanks for explaining, I was missing one step when programming. You made it easy to understand.
@Inyopools
4 ай бұрын
You're welcome! Happy to help.
This video was a great help. I had my pump programmed in no time.
@Inyopools
3 ай бұрын
Happy to help!
Thanks for the video - very helpful!
@Inyopools
3 жыл бұрын
You're welcome!
Incredible video! Thank you!
@Inyopools
2 жыл бұрын
Glad you liked it!
So very clear concise instructions 😀 thank you
@Inyopools
3 жыл бұрын
You’re welcome 😊
@swacht
10 ай бұрын
@@Inyopoolspp
How do I turn the timer to off? I only want to run 1 timer. Thank you.
@danajustice9536
Жыл бұрын
Came here to ask the same question.
@louis_costa
Жыл бұрын
Something this video and other videos, and even other boards don’t tell you is to turn a timer off. For example, if you have more than one timer, set to turn any timer off, set the start and stop times to the same exact time for example 3 AM start 3 AM stop and that will turn the timer off.
@Shortwheels316
Жыл бұрын
Go into your timers menu to the Timer you want "Off" Set your End Time to the same as your Start Time then press Menu. After you press menu the timer should read "Off"
@aaron7189
Жыл бұрын
@@danajustice9536 I FEEL LIK THE TIMER IS THE BIGGEST ISSUE WITH THIS PUMP AND HEYWARD SEEMS TO BE CLOSED UNTIL WEDNESDAY "DUE TO THE JULY 4TH HOLIDAY" BUT EVEN TODAY THATS A DAY BEFORE SO I CANT ASK THEM
Exactly what I needed! Thank you so much
Great job - very thorough!
@Inyopools
8 ай бұрын
Thank you!
Very informative!! Thank you!
@Inyopools
Жыл бұрын
You're welcome. Glad we could help.
Perfect video. Thanks!
@Inyopools
Жыл бұрын
Glad it was helpful!
hello thank you for the great video now i know about the low temp setting can you tell me how to turn off a timer? I can not find that option thank you
Yes thanks just set it up.... I probably should’ve done that last year LOL. Take care.
Perfect!
If there is a power outage/interruption is there any internal battery so programmed functions will continue once power is restored? Or will I need to reprogram?
Thank you!!
@Inyopools
3 жыл бұрын
You're welcome!
Thanks finally figured out how to adjust my time and day. After 5 years 😭
@seanmurphy26
2 жыл бұрын
Poor guy! These Hayward pumps are trash!
@deataol
2 жыл бұрын
No problems so far! What’s going on with yours?
Do you have a video for relay control set up?
How do you hear a pool with the timers set. My pump is scheduled to drop speed at night and will not hear my pool without deleting timers. Is there a way to override the timers so that I can heat my pool for say 24 - 72 hours?
If the pump loses power (power outage in the area), does it lose it's settings or is there a battery backup on the motherboard? I'd hate to do this every time we lose power in Florida! In my are we lose power at least once or twice a month... sometimes just for a minute or two for whatever reason. Then of course thunderstorms and the occasional hurricane! Or even if I have to kill power to my pool breaker box to do some work.
What program to use to heat the pool. Should be there a manual mode?
I was hoping to learn how to turn pump on when it is off and how to turn it off while it is on. I have been frustrated with this, so to clean the filter I have to wait till it goes off at 7:30pm or before it goes on at 9am
@Inyopools
Жыл бұрын
The button labeled "STOP/RESUME" that'd be the button you're looking for.
Thanks brother!
@Inyopools
2 жыл бұрын
You bet!
Great video! The only suggestion is next time you do a video like this turn auto focus off, so the display stays in focus.
When would I use speed settings?-- I thought the programing settings set speed setting and duration????? whats the diff?
perfect
What settings do I use to backwash my inground pool with this exact pump?
We have the same pump and have a keypad error 118 do you know how to reset this?
Hayward VS3400VSP can one change the rpm and time for the quick clean feature and if so how?
How do you k ow your systems max and min RPM? You said to "play around with it" but what parameters are you looking for to determine what to pick?
How do I schedule a timer to turn the pump off completely for one hour? I didn't see an option for turning the pump off for an allotted time, only options to set the RPM between 600 and 3250.
Thank you for the detailed instructions. I have a shock I want to put in the pool (ducks - need I say more?). But I don’t know how to set it for a one time run of 24 hours. Can you please let me know? Thank you!!
@Inyopools
Жыл бұрын
I checked the manual for this feature but couldn't find anything resembling this function. The Quick Clean feature tops out at 60 minutes; you can't alter the runtime. You may need to adjust one of the presets to run the desired RPM and schedule length.
I have mine connected to pro logic after installing a new drive. How do I program that?
Nice instructions!, Thank You! For some reason on my pump (Hayward Super pump VS 230v. MODEL W3SP2603VSP) there is no option to adjust the duration under speeds menu - preset speeds. It will allow me to change the speed but not duration. It will just run until the next timer is scheduled. Wish I was able to adjust duration.
@Inyopools
Жыл бұрын
How old is your pump/motor?
Hi. How do I go back in and adjust my manual speeds? Pushing the menu button is not doing anything.
So if the timer is set and you push a speed button does the speed button override the timer? When the speed is engaged for X hours does it revert back to programmed timers after that?
@Inyopools
3 жыл бұрын
The speed button would override the programmed speed within that schedule. It would still turn off at the scheduled time and the next time the pump turns on, it will revert back to the original programmed speed.
After setting your speeds for timer 1 and timer 2, why would you go back and set speeds 1-4?
Hello you guys make great informative videos for sure . Can you use a Hayward W3SP2303VSP in a 15,000 gal pool ? My pool guy said you need a high head pump not a low head . What is the difference ? I have a Hayward Pool Vac W32025ADC pool sweep . Thanks again .
@Inyopools
Ай бұрын
Thank you! First, ask your pool tech what the estimated 'feet of head' of the system is because the W3SP2303VS should be enough for most 15k gallon pools. The feet of head is the measurement of plumbing resistance that your pump would need to overcome to prime itself and pump water. Most pools are in the medium-head category
@whip-its_dad4239
Ай бұрын
@@Inyopools Thank you . What would be an ideal figure for this pump ?
To clean the pull using the Quick Clean button does the pump has to be on a Stop mode or I can press it while the pump is running
@Inyopools
3 жыл бұрын
You can press the Quick Clean button while the pump is running. It will automatically switch to the Quick Clean speed.
how do you override the timer, need to add chemicals and run pool when timer is off, resume will not start pump?
Greetings, how do I turn off a timer after it has been programmed?
how do I set it up to run for 24hrs, sometimes my pool company says add these chemicals and run for 24hrs. But I don't see anywhere in the manual to explain this?
How do I set the pump to run all night when I shock the pool? How do I turn off a timer?
@Inyopools
Жыл бұрын
There's no 24-hour override on this model like the Century V-Green. Your best option is to alter one of your schedules to run the desired clean cycle speed.
@rone2296
Жыл бұрын
Found out I could select Speed 3 and it ran all night until timer 1 started. Thanks
@rone2296
Жыл бұрын
Still would like to know how to remove, turn off a timer
I have a 14k gallon pool with a sand filter and pop ups for cleaning. What would be the best RPM for cleaning the pool? If set too high, will I ruin or wear out parts, seals, etc.? The manual is not very helpful. Thanks.
@Inyopools
3 жыл бұрын
Maximum speed settings are really dependent upon the pool and pump. For example, I have a 1.5HP VS pump with a cartridge filter that can handle 120 gpm. Running the pump at full speed does not damage anything. However, if you have a 2.7VS pump with 1.5" plumbing and a filter that can only handle 80 gpm, you may have issues. My recommendation would be to add a simple flow meter to the plumbing. That way you can determine how many gallons per minute are created at each speed. Then you can look at the flow rate of your filter and pop-ups and select the appropriate speed setting. This may not be exactly the answer you wanted, but with pools there are so many variables.
How can I wire this into an aqua plus controller
I just bout the VS700. When setting the Speed buttons, there is no option to set the duration. I can change the speed and the name of the button, but that's it. Am I missing something?
How do I set the timer to off mode? For example, I only want to use timers 1 and 2 and return the display mode for the other timers to display off
@thebrooklynbeat
3 ай бұрын
did you get a reply for turning off timer. i have the same question.
Hi I have a 9000 gallon medium size pool. What speed should I set for for high and low? My husband passed away recently and I am trying to set pump up and my pump works all day on a low speed. I want to set it to run on high for a certain time and then to a lower speed. What do you recommend?
@lrakwons9799
Жыл бұрын
Donna you need to have your pump run on a high, medium and low speed through the day. The real answer depends on how big your pool is and the equipment. Roughing it though I’d say you should have 3 hours on the high, 9hours medium then then the remaining 12 hours on low. That high speed allows for water movement and what ever sanitation you use to get through the pool, along with the medium speed. Good luck, sorry for your loss
Is there a way to, on for example, for a one time need to run the pump for 48 hours straight ( for a Phosphates cleaning) run time, run the pump?
@Inyopools
12 күн бұрын
There's no one-time setting button or mode for a maintenance scenario like that.
How do I program the pool to run continuously? Thank you
@leone04vice
2 жыл бұрын
Did you get an answer here? I am trying to run my pump continuously for a few hours but don’t want to delete timers
Is there a manual way to turn the pump on or off or do you need to cycle through? Thanks @inyo pools!
@Inyopools
11 ай бұрын
If you need the pump to run for a short period, the Quick Clean feature will do that without requiring you to change any scheduling
@johanabernal4027
6 ай бұрын
@@Inyopools Ok, so if I want to crank up the spa on the late night after the day cycle is completed, I can simply on/off the pump using the "Quick Clean" button?
Great presentation. How to set it Thanks to run for 24 hours
How do you clear a timer setting to off? Nothing anywhere says how to do that. Previous owner had crazy settings and I don't need it running like that.
@MrJimfern
Жыл бұрын
Note: When start/stop times are set to be the same, the timer is deactivated.
Not sure if you answer questions,.. But what could be the cause of the screen not powering up and the pump not turning on? I turned the pool breaker off and when I turned it back on , the pump and screen do not turn on. My multimeter shows that it's getting power, but nothing is working. The pull cleaner pump works but not the main pump (Tristar VS 950)
@Inyopools
Жыл бұрын
Water could have shorted the board or failed due to sun exposure being the usual culprit. If your pump is still under warranty, Hayward should replace that free of charge.
How do I turn OFF a timer once its programmed?
How do I temporarily turn the pump on, while it is NOT in the programmed time mode? (Eg.. I have it programmed to shut off at 6pm. But I want to turn it back on at 7pm for a few minutes, etc). Thank you.
@Genuts4642
3 жыл бұрын
Did you ever get and answer for this? My pump is programed to shutdown at 6pm sometimes we want to use it outside of the programed hours but I don't know how to manually turn it on without changing the timer. There has to be an on/off button somewhere on this pump.
@RichieLeest
2 жыл бұрын
Looking for the same thing
@GulfCoastMach
Жыл бұрын
Press "Quick Clean" to run for 60 minutes, then again for each 60 minute duration you want.
@digoodrich2358
3 ай бұрын
Or you can use your speed 1 2 3 or 4 settings you adjust those to run for a certain period of time at that speed
If my pump is in low temp mode, will it run 24/7 if temps remain low? I need this feature lol
@Inyopools
6 ай бұрын
When Low Temp Mode is activated the pump will run at the Max Allowed Speed for 8 hours. If the temperature is still at or below the Low Temp Setting at the end of the 8-hour cycle, it will begin again.
My pump turns off at 7pm. If I want to restart it before my timer turns it on how do I do that?
@Inyopools
Ай бұрын
Press the Quick Clean button for a one-hour cycle. You'd have to adjust your schedules to get the pump to run for longer.
because of freezing temps, I want to run the timer 24/7, how do I do that?
@Inyopools
9 ай бұрын
You can set the pump schedule to run for 24 hours a day just as you would schedule the pump for any other run schedule.
How do I program the time that quick clean stays on?
@Inyopools
Жыл бұрын
I don't believe you can schedule a quick clean; it must be initiated manually.
How do you adjust quick clean speed? Mine is on 2500, would like to bump it up to 3200
@janalsen
2 жыл бұрын
did you get an answer to this? I have the same question.
@Shortwheels316
Жыл бұрын
I don't believe you can adjust the speed on quick clean..just the hours up to 4 hours I believe
@digoodrich2358
3 ай бұрын
The written instructions say that whatever your maximum speed is set at is what the quick clean setting will use
do you know how to get it to English, our pump is in French?
My instructions are all in GERMAN? Other than learning Deutch, what do I do now??!!
My freeze protection RPMs was at 3450. How can I change this to 1700 or 50%?
@Inyopools
Жыл бұрын
The low temp run speed will default to the Max allowed speed. There isn't currently a way to change the RPM specifically for the low temperature feature. If you don't have a need for the Max to be 3450, you can drop that RPM setting.
@deborahm2380
Жыл бұрын
@@Inyopools Thanks. My pool tech guy said we (Tucsonians) don't need to Enable the low temp setting due to the fact that the pipe is 2.5" dia., and the cold spells don't last long enough. So for now I just disabled it.
I'm not getting any power to the new pump install.
@Inyopools
4 ай бұрын
That sounds like more of a circuitry concern than a pump problem. If you've tested the pump side's terminal lead and get no voltage readings, then I'd start at the breaker and work your way down. You could maybe try putting the pump on a different breaker to narrow down whether it is the breaker or the wiring.
How do I leave the pump on for 48 hours straight?
@ppags84
Жыл бұрын
Pick your speed and keep pressing it will add a half hour each push
How can I turn the pump on and off manually?
@Inyopools
Жыл бұрын
Walk to the pump every time and hit the on/off button. Hook the pump circuit up to a light switch.
@carlhaggard3792
Жыл бұрын
@@Inyopools I tried that on off I tried the quick clean. I cannot get this thing to turn on to back washed it, but it comes on with the timers just bought the house. Can’t find the manual to it or the remote control. Frustrating.
@Inyopools
Жыл бұрын
Hayward Super Pump SP2603VSP Manual - images.inyopools.com/cloud/documents/super-pump-vs-s2603vsp.pdf
@carlhaggard3792
Жыл бұрын
@@Inyopools thank you so much really appreciate your help
How do I delete a timer???
@JDubs_YT
3 жыл бұрын
YO I HAVE THE SAME PROBLEM
@CNirc361
3 жыл бұрын
I believe you set the time to midnight
@deataol
3 жыл бұрын
You put the timer both timers back on 12pm and 12pm. It will automatically stop the timer.
@111baba11
2 жыл бұрын
How do I turn the timer off? Again how do you turn off the timer???? What a bad software design
@berecrocker9356
2 жыл бұрын
You put the start time and the end time at the same time. For example: put your start time at 4:00p and your end time at 4:00p and it will then say “Off” remember to save your changes
How to get my pump to run 24 hours a day
@Inyopools
6 ай бұрын
You can schedule it do so by using the steps in the guide.
Maybe if u didn't talk with yur fing hands so much the video would have came out clear.