How to Program a Craftsman Garage Door Keypad
Тәжірибелік нұсқаулар және стиль
In this video I teach you how to program, reprogram, set, or change your Craftsman garage door keypad code. It is fairly simple and you can do it in about a minute. Hope this video helps!
Пікірлер: 83
Awesome job 8 years later took me 20 seconds with your video
Six years later and still helping people
We lost power earlier this week, and our wall-mounted remote somehow lost its connection. The manual had zero instructions, but this video helped. Thank you!
Thank you for noting that when you are setting the code you need to hold the Enter button. Other videos missed that and I have been running around trying to figure out why it wasn’t working! 🤣
Brief, clear and to the point. Thank you so much.
Thank you. Thank you. Thank you. Just purchased a home. Craftsman instructions are confusing. Your video is simple and easy. Changed both door codes in a matter of two minutes. 👍
Thank you for this! I thought I was going to have to call a professional, so much appreciated!
Thanks so much. Just moved to a new house and needed to change everything. You're my hero.
I accidentally erased mine after trying to add a new one and this video is perfect! Immediately tried it out after watching this and got it programmed.
@inflight747
2 жыл бұрын
I have the identical garage door opener, the battery in the keypad had not been changed since it was installed in 1999 after watching this, I changed the battery and it worked like new!
Now that is some fine instructions. Thank you
Thank you so much for publishing this! I just thought I was out of luck with my keypad code, but no more!
Thank you for posting. Quick and to the point on how to program it
Thank you for posting this!!! We thought our keypad was broke. This worked :-)
BUMPITY BUMP BUMP LOL..... Thank man! Ya came to my rescue once again!!!
This was super helpful (and quick). Thank you!
thank you so much! this method is different to the one described in the original instructions but it worked for me, while the original didn’t after multiple attempts. Much Appreciated!
Thank you!!! That worked wonders and on the first try. Why can't the written instructions in the package or on the item never be that easy? LOL LOL
Perfect directions. Helped me out. Thanks!
Great video! Really gets to the point! Many will find it helpful
Simple enough. Just bought mine, I’m ready for install now.
You are awesome! Thank you. Quick simple worked!
Thanks for posting. I have the exact same equipment and your instructions solved my problem. I thought my keypad was shot. So glad to have my keypad working again.
@iTeachNeatStuff
10 жыл бұрын
Glad it helped!
@marklentz1095
6 жыл бұрын
This is so close to helping me. I have an ancient Craftsman model from 1995. I have a green button- no red. So I figure I'll just push the green button and then enter a new code as shown in video. Doesn't work. Any other ideas?
Thanks so much. Worked perfectly the first try!
Thanks so much! You were a big help!
Thank you so much! It worked!
Thanks for the tutorial. Worked perfectly. 👍🏽
Worked perfectly! Thank you. Not sure how there could be a single thumbs down.
Super helpful thank you!!!
Thanks helped a lot
Perfect!!! Thank you!!!
Thank you. We have a liftmaster keypad that we're using in the house. I programmed the LM successfully but found out that the outside keypad wouldn't work. Can I program Both keypads?
This worked for me!!
you the best thank you!!
Thank you. I changed the battery and nothing worked. I followed your instructions and the garage door is working great! I couldn’t believe how easy it was. I spent 2 days trying to figure it out! Thanks!
so, sweet. I'll be stopping by your place! lol
@kevina2052
8 жыл бұрын
2222!
Thank you that was very helpful
Thank you!
Omg thank you !
Thanks I have the exact setup.
Perfect thank you!
Thanks it worked
thank you. that what exactly I need
THANK YOU!
Thank you so much
My light on the keypad just keeps flashing
Perfect!
I do not have an 'Enter Key' can you please advise how to program?
@DiscoStew25190
3 жыл бұрын
Did anyone figure this out? I also don’t have an “Enter” button.
Thank you.
Thanks 🙏 bro
Hey I need help. So I'm trying to reset it from the outside I follow the instructions to like reset the code like I knew the code I entered it in and then I try to enter in like a new pan well somehow I messed it up and now either of those codes won't work so now I can't even get my garage open so what do I do to reset it from the outside
What if you just got new garage door on both sides but they didn’t set up our codes do we have to do anything special to “connect” them? Because they have never been used with the code before
Thank you
Thanks you
I have an old craftman door opener 1/3 model 139.53210. It doesn't has a light or a button to push. The keypad works, but I dont know how to make it work. Help!
Will this change any settings in your car opener
I have the exact same unit with the exact same crack in the light cover.
Thanks
Are these pads hardwired?
I just installed one and right after I did the homelink buttons in my cars stopped working.
Does it have to be 4 digits Can i have 6 or 7 digit pin??
When I hit enter, my door opens, no code. I don't want a stranger doing this. I out in the code as instructed, but it still opens if you only hit enter.
After I hit learn and enter the new number and hit enter, I don't get the blink. My keypad just starts blinking 30 times and doesn't take the code. Anyone have any idea what this is? I have the same set-up as this video. This is driving me crazy.
I have no enter button...how do I do this?
@derickwjazz
3 жыл бұрын
Man I wish some had answered this!
Had it for over a year
how can programer 2 controls¡?
@danielivan4472
4 жыл бұрын
I have the same question. Could you resolve it Replicas Arc?
My keypad doesn't have an enter button
I did that and I do not get the click, Tried it a lot no luck,ever unplugged it and tried 1 more time
at the end, you opened the door, just by Pushing the "enter" button. Seems to defeat the point of the code
@TheSoberDoc_
4 жыл бұрын
It's because he already entered the code as was within the time of the door opening/closing.
Not working 😞
Doesn't help no enter key
😂
Yeah ggs, the other vid is a dude changing a battery 🙄🤣
Wtf. I don’t have asterisk or pound signs !
Thank you