thanks for the video - i programmed my 2019 ESV Platinum- one suggestion: if you have multiple fobs- you have to reprogram all at the same time- i tried just programming the new FOB and my old one no longer worked- so i had to repeat the process- 30 min of my time is well worth the $300 i would have paid for the programming and new fob- found one on line for $80!! thanks again !

@NashvillePastaman

4 жыл бұрын

FYI: i had both FOBs in the car- the FOB codes are fixed- this process re-writes the vehicle presets- so it doesn't matter where your fobs are until the car is ready to read them -

@PYR-Auto

4 жыл бұрын

You're Welcome! Good tip!

@veronicalopez-hudson3268

3 жыл бұрын

same i was afraid that i would be purchasing a new fob for mines till our service advisor suggested we reprogram it , this video has saved the hassle

@BUNTY35

Жыл бұрын

hi were you able to reprogram your old key fobs using steps 4-6, i am little afraid, if my old one wont reprogram

@davidruble7699

11 ай бұрын

This is an all keys lost function so it will erase any previously programmed keys and only work with what keys you program back in

Excellent tutorial!!!

@PYR-Auto

3 жыл бұрын

Thanks!

Hi. How do I program a second key fob I bought but still have a working fob? These instructions allowed the new fob to function but disabled my original working one. Thanks!

Great job !!

@PYR-Auto

4 жыл бұрын

Thank you!

Perfect! Thanks!

@PYR-Auto

Жыл бұрын

You're welcome!

Thank youuuu AMAZING I REALLY APRECIATE

@PYR-Auto

11 ай бұрын

You're welcome! Glad it helped

I actually re-programmed with the working fob far away and all it did was flip flop functioning fobs. Not sure what else to do.

This video save me $180 to reprogram the new remote, here in Texas

@PYR-Auto

2 жыл бұрын

Glad it helped!

I can't access learn mode by turning the key 5 times within 10 seconds, no message is shown on the dash, 2018 Cadillac escalade. any tip? i tried moving on without getting the message on the dash and nothing happened.

2018 escalade platinum will not display the "DIC PRESS ENGINE START BUTTON TO LEARN" screen. I have carefully tried to do the 5 CCW door lock key turns several times and the learn mode is not displaying. Any other methods or suggestions?

Excellent

@PYR-Auto

Жыл бұрын

Thanks

Will doing this remove the programming of already programmed remotes? For example if I program the new remote and exit the programming without adding original remote into glove box and repeating steps 4-6 with the original remote. will my original remote not work now?

@PYR-Auto

4 жыл бұрын

Yes, this will erase any original remotes unless they are programmed back in during the procedure (repeating steps 4-6)

what if i have one good fob and key and one key with loat fob

Does this process work with a 2021 Escalade Key Fob? I have one, need to add another so do I still repeat steps 4-6 with both FOBs to have them both functional?

@PYR-Auto

Жыл бұрын

No - a 2021 uses a different procedure. We don't have a video for it yet but you can find the text instructions here www.programyourremote.com/classified/2021-cadillac-escalade-keyless-entry-remote-fob-smart-key-programming-instructions-listing-11233.aspx

Got it!!

@PYR-Auto

3 жыл бұрын

Great! Glad you got it figured out

We had one of our two keys stolen - when I go through the sequence it will erase the two previous keys saved right?

I have 2 key fobs now that came with the 16 Escalade I purchased but the fobs are a bit beat up so my question is, can I buy 2 new fobs and use the old keys to program the new fobs without cutting the new keys? And place the old keys in the new fobs Am just trying to avoid going to the dealer to cut the new keys. Can locksmith cut them or is that only done by dealer?

@PYR-Auto

Жыл бұрын

Yes, you can use the emergency keys out of the existing remotes. If the only issue with your current keys is that they are worn, you can also just buy replacement cases and move the electronics into the new cases - then you won't have to reprogram.

It doesn’t show remote learning pending on 2016 Escalade but it shows ready for remote 3

Can you program a key fob if purchased from an individual that’s selling one do I need to get that key cut like you mention in the video what if it’s already cut and was used for their own vehicle would it still work

@PYR-Auto

4 жыл бұрын

You can use a used fob, but it needs to have been "flashed" or "unlocked" before it will be programmable again. You will need a new key cut to your vehicle.

@zubzero41

4 жыл бұрын

How do we flash or unlock it? Can we do it ourselves, or how much do dealerships charge

@PYR-Auto

4 жыл бұрын

@@zubzero41 You can't do it yourself without the correct hardware and software. It's not something the dealerships do either, they would just try to sell you a new fob. I would just google "remote fob flashing" and look for a website that does it or I believe there are some companies on Ebay selling the service as well.

I have replaced 2019 escalade door handle sensors but is not working but old ones are working. What should I do

@PYR-Auto

3 жыл бұрын

Not sure - I've never replaced the door handle sensors

this didn't work at first, but then it did. My 2017 Escalade would not program the aftermarket fob on my first attempt. Then, the original key wouldn't work. Disconnected negative battery terminal for a bit. Turned back on and it said to insert key 2. Did the final steps from the video and somehow i got both keys programmed.

@davidruble7699

11 ай бұрын

The 2017 models can take a fob with either a 413mhz remote or a 433 mhz remote. It’s the only year where you have two possible frequency options for the remote

@kalsisingh4434

7 ай бұрын

oh my, Same thing is happening to me i have no keys active now, So now i should disconnect negativie terminal?

How do you define what number remote they are to meet the driver settings for each remote

@PYR-Auto

2 жыл бұрын

The order in which you program them in will determine that - so the first remote programmed will be Driver 1 and then count up from there.

I got a 2015 Escalade with this style of key fob, do you know if I can program a key fob from a 2020 Escalade, the one that looks rectangular. Thanks

@PYR-Auto

2 жыл бұрын

I'm not sure what key fob you mean - a 2015 and 2020 Escalade use the same key fob

@chuckz253

2 жыл бұрын

@@PYR-Auto sorry I meant a 2021 style key fob. I read that they supposed to be same frequency as the 2015. So I was wondering if it's possible to program one of those to the 2015.

@PYR-Auto

2 жыл бұрын

The 2021 fob is a completely different style, with a different FCC ID so I don't believe it would program to a 2015 but I can't say for certain as I have never tried it.

I have a 2017 Escalade ESV and can’t seem to Enter Programming Mode. I tried turning the key counter clockwise 5 times within ten seconds but my dashboard does not indicate programming mode. What am I doing wrong? Or are the steps different in the different trims of the car?

@PYR-Auto

3 жыл бұрын

Some vehicles only show the message for a few seconds right when the door is opened or closed. I would recommend just continuing with the procedure and going off of the time.

@ahmedaltowaileb

2 жыл бұрын

i am having the same issue here, any luck yet?

first of all thanks for the video. its very useful. I have one question or concern. i have only one working remote for 2017 Escalade, i am afraid that if i use this method, it will definitely erase the working remote ( but will program the new key fob, which i baught ) will it reprogram my original key fob ? using steps 4-6. what i am afraid is that, my original remote could be locked, like you said that it will need flashing, to reprogram on the same car. just want to confirm, that my original key fob will be reprogramed using steps 4-6 without flashing servise etc.

@PYR-Auto

Жыл бұрын

this procedure will erase your original fob but it can be re-programmed. The fobs lock to a vehicle once programmed but can be re-prgorammed again to that same vehicle an unlimited number of times

@BUNTY35

Жыл бұрын

@@PYR-Auto thanks 🙏 for quick reply. I will try to program keys today.

@agent985

5 ай бұрын

​@@BUNTY35 did you succeed?

I did this and still not working Any suggestions?

I changed the batteries and now both old fobs won’t unlock but will start when placed in the center console. Will this work for me? With the used fobs?

@PYR-Auto

4 жыл бұрын

You can re-program remotes with this but it sounds like you may have other issues. Are you sure you installed the batteries correctly? ( not upside down)

@jeraldneely3984

4 жыл бұрын

@@PYR-Auto the fobs unlock and remote start, but to crank I have to but the fob in the center console slot and no remote detected shows up on the display

Hi. Question. I just want a spare key, will this delete my first key from the system?

@PYR-Auto

3 жыл бұрын

Yes - your original will need to be re-programmed during the procedure. If you look at the steps in the description box of the video, you need to repeat steps 4-6 for your original remote after the new ones are programmed.

@vadimichs4211

3 жыл бұрын

@@PYR-Auto thank you for getting back to me. Very helpful

@PYR-Auto

3 жыл бұрын

You're Welcome!

How do you do if you have two fobs to program

@PYR-Auto

11 ай бұрын

If you look at the steps in the description box of the video - you need to repeat steps 4-6 for the second remote after the first one is programmed

MY CAR IS A 2015 CADILLAC ESCALADE, I BUY AN ORIGINAL KEY AND I COULDN'T PROGRAM IT, IT WAS NOT UNLOCKED, MY QUESTION IS, IF I BUY ONE THAT IS UNLOCKED, CAN I PROGRAM IT? FRACIAS.

@PYR-Auto

3 жыл бұрын

Yes you should be able to

every time I try it says remote has left the vehicle.

What about the first remote I already have? I'm buying a second key fob for a spare.

@PYR-Auto

4 жыл бұрын

You will need to re-program the original as it will be erased during the procedure. If you look at the steps in the description box of the video, you will repeat steps 4-6 for your original remote, after the new remote is programmed.

Execellent job my friend. It worked as explained. It can't get easier than that.. You are a pro

@PYR-Auto

2 жыл бұрын

Thanks! Glad it helped

Can this be done with an uncut key? Lool

@PYR-Auto

16 күн бұрын

no

Escalade 2016: The same way without all smart keys? Thank you.

@PYR-Auto

2 жыл бұрын

Yes

@tango6022

2 жыл бұрын

@@PYR-Auto Thank you for your reply. I'll give it a try!

@PYR-Auto

2 жыл бұрын

You're Welcome!

@tango6022

2 жыл бұрын

@@PYR-Auto I tried it today, but I couldn't make a Japanese dealer car. I programmed it with AVDI. Thank you.

@tango6022

Жыл бұрын

Can I use a used smart key?

Thanks a lot, save me at least $500 bucks

@PYR-Auto

10 ай бұрын

Glad it helped!

This will work on 2019 and 2020 Escalade?

@PYR-Auto

4 жыл бұрын

Yes, it will. You can also find this procedure in the owners manual.

Didn't work with me

GM makes it hard/time consuming to add new fobs; must be so profitable to sell the customer spare fobs.

what does he mean? cut the key?? why would someone say thats expensive? whats that even mean?

The one thumbs down was the person that found out its expensive to cut the e key and blames the video maker like its their fault.

@PYR-Auto

4 жыл бұрын

must be! lol

@xjumpmaster82

2 жыл бұрын

How interesting you knew that about them.

@rmsg7504

2 жыл бұрын

@@xjumpmaster82 😆

My fob won’t unlock or lock when pressed after you remove it from the middle console. (It’s a new battery and it’s the correct way)

@PYR-Auto

Жыл бұрын

There may just be an issue with fob - if it is a refurbished fob it may not have been unlocked properly