Have a 2010 enclave, remotes from Amazon and these tips, worked. Thanks

@PYR-Auto

5 ай бұрын

You're Welcome!

Once I identified the correct button, it was easy-peasy

Hey great advice!

That was 😂 easy it works thanks

@PYR-Auto

9 ай бұрын

You're Welcome!

Good job ! Thanks !

@PYR-Auto

3 жыл бұрын

You're Welcome!

IT WORKS 😎 THANK YOU

@PYR-Auto

3 ай бұрын

You're Welcome!

Thank you

@PYR-Auto

4 ай бұрын

You're welcome!

Great

@PYR-Auto

2 жыл бұрын

thanks

I have a 2008 Enclave CLX. The menu doesn't have the option on mine. It has a remote start option, but not "relearn remote" setting in the menu. I purchased 2 key fobs from your company. Any suggestions?

@PYR-Auto

3 жыл бұрын

Typically when the menu does not show the option it means the vehicle does not have the keyless remote option installed. However, I think that was a standard option on the Envlcave. You can verify that by calling a GM dealerships parts department with your VIN number. I'm not sure where you purchased the remotes from but it was not us, as we do not sell remotes.

Will this work to reprogram a used remote that’s from another Buick enclave ? Thats exact same type but not programmed to vehicle ?

@PYR-Auto

5 ай бұрын

yes, as long as its the correct remote

I have this same car but my key doesn’t have the remote start button. Can I still re learn this key? Somehow get another button to do the same.

@PYR-Auto

3 жыл бұрын

It will be the same programming procedure if you have remote start or not. You just want the remote to match your vehicles options

Does it unlock just the driver's door or all doors. Mine is Only programing the driver door. And it doesn't chime after 15 seconds

@PYR-Auto

5 жыл бұрын

It should do all doors. If a remote successfully programs in it should never only partially work, unless there is an issue with the remote. Is the remote worn? The rubber button pads on that style fob wear out over time and the buttons become hard to use.

I have a 2006 buick lucerne and when i push the check it won't go into relearn remote. Any idea why?

@PYR-Auto

4 жыл бұрын

I'm not sure, an 06 Lucerne should be this same procedure

Hey, I tried this today but when I press ✔️ to relearn remote it doesn’t go to remote key learning active. Any ideas? Have to mention fuse box was replaced recently.

@KristijanKonjicija

4 жыл бұрын

Edit: it is a 2008 enclave.

@PYR-Auto

4 жыл бұрын

If you haven't already, try holding the button down for a few seconds rather than just pressing and releasing it like I did in the video. As far as the fuse box, I suppose if something wasn't installed correctly it could be interfering with the key less remote system but if none of the fuses are blown that's probably not likely.

@PendingThoughts

Жыл бұрын

Having the exact same issue with the same fuse box situation.

Didnt see you test the remote start button

@someguy-xi2xq

2 ай бұрын

yeah how do we make that work?

Hi, I have the same car and doesn't shows the reprogram option any other ways to do it?

@PYR-Auto

Жыл бұрын

What year is your enclave?

I have a 2008 buick enclave but it doesnt make a sound when i click on relearn remote key

@josiegarber4489

3 жыл бұрын

mine did

I dont have the relearn remote option, but i have options for remote doors and remote start what do i do?

@PYR-Auto

Жыл бұрын

What year is your enclave?

maybe you can help. my dads 2011 Buick Lucerne does not show any " key fob relearn " wording anywhere on its DIC buttons... even after watching more then a dozen of ..its so easy ....videos say its just a few clicks...

@PYR-Auto

4 ай бұрын

There is no manual way to program fobs for a 2011 - you will need an automotive locksmith or dealership

@joeknowz4898

4 ай бұрын

@@PYR-Auto yep... we did everything all the otters videos did but we never had the re-learn key option show on any of those selections..

Have a 2008 Buick LaCrosse CX and doesn't give me the option

@PYR-Auto

4 жыл бұрын

There is no manual way to program a fob to a 2008 LaCrosse

@sosa739

4 жыл бұрын

Would you be able to tell us how to program 2007 Buick LaCrosse remote? I need a replacement

Just picked up a 2011 and the remote won’t do anything. And relearn remote is not an option in drier settings. Please advise

@PYR-Auto

2 жыл бұрын

Unfortunately a 2011 Enclave is not onboard programmable - meaning you will need an automotive locksmith or dealership to program remotes.

@larrywinchester8117

2 жыл бұрын

@@PYR-Auto made too much sense and was too easy to leave it in the onboard. Lol

@PYR-Auto

2 жыл бұрын

Yes lol they want you to have to go to a dealership

I tried this but my 2015 enclave doesn't show relearn key remote for a option. So cant even try this and hate to spend a few hundred to reprogram a key I got for $15

@PYR-Auto

4 жыл бұрын

This procedure only works on a 2008-2010 enclave

@braids3292

3 жыл бұрын

@@PYR-Auto but is there a way to do it for a 2015 im in the same boat.