Thanks so much. This and your window Videos have been a. Huge help to me doing it myself.

Congrats @kiravans! Your videos are very good and useful 🙏

Thanks for the videos - going to try the same process for my fiet doblo

Fantastic video- thanks for sharing

Fantastic job

Really good explanation . Perfect

Fantastic informative videos. Thanks a lot. Salaam to you and to all.

Excellent video

Looks great!

Thanks for the tip about slam vents, I’m just about to carpet my interior and had originally covered these holes up👍

Great job!

well done!

Nice work Mikey!

Thanks for the videos! Why did you take the descision to not putting noise damps on the wheel covers? 😊

Hi, did you ever make a video about the flooring? I’m interested what floor insulation you use

Excellent video! You mentioned a plastic clip if one don't want to screw in the panels. What kind are you referring to? Thanks!

One question i haven’t heard you mention. Do you not sound deaden or thermo acoustic line the wheel arches. It’s an area that causes a lot of road noise and have seen them sound deadened on other videos. Wondered your thoughts. Great videos, thanks for all the advice!

Great informative Video as always. Learnt some tips and have put our own video out on our channel

@kiravans5874

3 жыл бұрын

Thank you.

Brilliant

@kiravans5874

2 жыл бұрын

Thanks David!

Any tips on hiding screws apart from getting similar colour ones

Great video, keep them coming!! Where would you get the rear threshold from? 👍👍

@kiravans5874

3 жыл бұрын

Glad you like them. We sell the threshold trims here: www.kiravans.co.uk/pages/search-results-page?q=rear+threshold+cover

Is your insulation and carpet kit enough to do a panel Van with kombi side windows, when carpeting the ply full height panels separately. Also insulating the roof and floor ?

Hi is it not necessary to insulate the metal joists?

What size steel screws? I have black carpet. Any recommendations?

Hi, Is there a reason you did not sound deaden the wheel arches before carpeting?

Just been watching your series in readiness for starting my own. I noticed no vapour barrier behind the panels, Are we thinking it's not required as I know lots of people have different options. Thanks for the video's and keep up the great work.

@kiravans5874

3 жыл бұрын

Hi, you're right about lots of different opinions on how folks do this. A vapour barrier might be sensible if you are planning on spending weeks or months living in your van in colder conditions. If primarily for weekends away and mostly summer use then I don't think it's necessary.

How did you do the floor, do you screw board through metal panel. Can’t be a good idea

Hello. Can you please tell me what kind of glue do you usa?

Hi there were can i purchase the carpet i am in the process here in northern ireland is it possible to purchase the carpet for a citreon dispatch 2013 or wer to buy please class video thanks

What sizes will do a transit mwb

Just wondering do you have to put a membrane barrier after you put the insulation in and before you carpet lining? Love the videos very informative and a great learning source 👌thank you

@kiravans5874

3 жыл бұрын

We recommend a 4 layer process, 1. Sound Blocker 2. Thermo-Acoustic Foam 3. Thermal Fill Insulation 4. Stretch Lining Carpet

@seanfallon4580

3 жыл бұрын

Forgive my ignorance but what is sound blocker and Thermo acoustic Foam 🤔 That you for your prompt reply your very good 👍

I struggled cutting the carpet with a Stanley knife. Would just drag it. New blades and tried the snap off blades yet still the same. Would this have been down to my technique or the type of stretch carpet I was using. Perhaps it was a poor quality stretch carpet. Anyone come across this situation as well? Made for a poorer job

What color is it on the carpet?

Why are the wheel arches not covered in sound deadening please ??

Great video will this carpet stick straight on plastic panels inside thanks in advance

@kiravans5874

Жыл бұрын

As long as the plastic is clean and de-greased then yes it will.

If you've carpeted your storage panel, could I carpet all the interior panels in my VW shuttle? Guessing a degrease prior to applying glue would be needed? Thanks

@kiravans5874

2 жыл бұрын

Yes you can carpet the interior panels. Just make sure you use a degreasing agent to wipe it all down to make sure there's no dust or any residue left on there. Spray the metalwork with high temperature adhesive where you want the carpet to stick, and spray it on the back of the carpet too.

I'm thinking about attempting to carpet my van. I've never done it before, is it easier to carpet with ply already in? Or do panels separately & screw them in? Thanks

@kiravans5874

3 жыл бұрын

There isn't really much difference in terms of 'difficulty' but if you think you will need access behind your panels in the future then carpet them separately and screw them on.

Hi again Mike, my T6.1 is coming with a steel bulkhead and hard wood floor. I’d like to carpet the interior like you did in this video (except the ceiling) to protect the metal from equipment banging around. Do I have to remove the bulkhead too for a clean finish? I’m wondering if I can also carpet the bulkhead too - have you ever done this?

@kiravans5874

3 жыл бұрын

Hi, it's a while since I carpeted my last van but I reckon you should be able to do a good job by leaving the bulkhead in - especially if you are going to carpet the bulkhead. You'll have a better idea once you get your van and take a look. Good luck :)

@D_L_J_83

3 жыл бұрын

@@kiravans5874 thanks so much, and your video is really helpful!

@harrydestcroix5516

3 жыл бұрын

Diego Lorenzo Jose if you take out the bulkhead there’s a lip on the floor and it’s a bit of a pain in the ass me and my dad got rid of it earlier but it make a bit of a mess

Good video. May I ask, when carpet lining up to where the rubber door seals sit, do you wrap the carpet over the metal lip on the bodywork, or trim the carpet level with the lip? I'd prefer to wrap the carpet over the metal lip, but I'm concerned that if I do that, the thickness of the carpet will mean the rubber seals won't go on properly and they could leak.

@Framinator

7 ай бұрын

Mine was carpeted prior to me buying the van and I had to trim it back and fit a new seal because as you mentioned, it stopped the seal from doing its job and dripped constantly

Also do you drill hole through carpeted panel first before putting screws in? Cheers

@samstorton8763

3 ай бұрын

If you are using screws to attach panels then you'll need to use a 2.5mm drill bit and use general purpose pozi-drive screws about 30mm long. The drill bit is about the same diameter as the solid part of the screw.

Hi, nice lining! which color is this one as refered to the kiravan web site ? thanks

@kiravans5874

3 жыл бұрын

Hi, it's silver carpet which is available to buy in 5m or 10m on our website.

@petricaenache444

2 жыл бұрын

I was looking on comments to find out this info . Thanks 🙏

Pls, can you specify the name of the material you call carpet? Trade name? Thank you, Igor Czech Republic.

What plywood panels are you using? My van doesn’t have any and I’m clueless where to buy decent ones that’ll suit the carpet and interior lining kit you sell.

@kiravans5874

Жыл бұрын

It's just a mid-priced ply lining kit from the internet.

Are the bits without ply lining or frame to cover the insulation going to be spongey to touch? Is there no way to perhaps ply line and then carpet so as to ensure you don’t get insulation falling out behind the carpet? Please let me know your thoughts as someone who is looking to do this soon. Thanks very much.

@kiravans5874

3 жыл бұрын

I'm not sure if you fully watched the whole video? You will see that I screw carpeted plywood panels over each wall section after carpet lining over the metal framework.

@Marco-ez8zm

3 жыл бұрын

@@kiravans5874 =)

@kiravans5874

3 жыл бұрын

@@Marco-ez8zm 👍

Join on the rear door frame like most ive seen on youtube....none of that on the vans ive done 🤔

Hi! Do I have to remove the ceiling if I want to carpet line just the walls of VW T6?

@kiravans5874

3 жыл бұрын

If you are just carpeting the wall panels and screwing them in place then you don't need to remove ceiling panels. If you are carpeting the walls fully up to the ceiling then it is best to remove ceiling panels and carpet walls up above ceiling level so the edges are neatly hidden.

@D_L_J_83

3 жыл бұрын

@@kiravans5874 that makes sense. Thanks so much

If you set temp to 20 degs, does the heater shut down around 20 degs and then start up again when the temp falls significantly. Or in other words has a proper temp controller?

@kiravans5874

2 жыл бұрын

Hi, The rheostat (or rotary) control works by twisting the control knob to the desired heat setting, and using the buttons listed to determine the heaters function. Variable output is simply high to low heat/fan speed. The temperature button switches the heater to thermostatic mode (the heater will then switch to a cool-down cycle automatically once it has reached the selected temperature). The fan button only switches the fan on for cool air.

@sexonlegs666

2 жыл бұрын

@@kiravans5874 Thanks. So yes it does regulate the temperature

Do you not use a thermal reflective vapour barrier?

@kiravans5874

2 жыл бұрын

Hi Yes we use a 4 step lining process, step 2 we use a Thermo acoustic foam: www.kiravans.co.uk/collections/insulation-carpet-vinyl/products/van-insulation-lining-self-adhesive-foam-with-foil-inner-surface. With this, we mainly only place this in the cavities of the panels and the roof however. Some others prefer to cover more areas with this product of the lining. Thanks

I am not sure why you put two laters of felt on the van, first against the metal, then the felt panels? Was this for insulation and noise reduction?

@kiravans5874

3 жыл бұрын

The first is the sound blocker layer and the second is the thermo acoustic foam.

@kiravans5874

3 жыл бұрын

Sorry, just re-read your question and I think you are referring to the lining carpet. As I am screwing carpet lined plywood panels to the main wall areas, the first step of carpet lining is just to cover the exposed metalwork, which surrounds these panels. The easiest and neatest way to do this is to carpet line the whole side of the van with one large piece of lining carpet. If I just tried to cover the metalwork with strips of carpet there would be lots of unsightly joins. This technique is a bit more wasteful of carpet but does allow for the removal of wall panels if required later. I could have cut out the carpet locally behind the plywood panels and would do so in future if I needed access to those cavities but thought I'd just leave it as extra insulation/sound deadening in the meantime. Hope that helps to explain.

@jkyoft78

3 жыл бұрын

@@kiravans5874 ok, thanks

How thick is the ply you’ve used for the walls of the van? Thanks

@kiravans5874

Жыл бұрын

It's thin sheets of ply 3.6mm. It's not a product we supply but there are various sellers online who supply ply lining kits. I hope this helps.

@gavt1198

Жыл бұрын

@@kiravans5874 thanks again guys !

Were did u get the rear side panels that go above the wheel arches mate

@kiravans5874

2 жыл бұрын

Do you mean the door stores, or the plywood panels? The door stores are available on our website www.kiravans.co.uk/collections/kiravans-vw-t5-t6-doorstore-campervan-storage-accessories, you'll just need to carpet them. We have a viedo on our website explaining how it's done. The plywood panels are simply just sprayed and carpeted.

@Galamesh123

2 жыл бұрын

@@kiravans5874 ah I see I have the original grey card panels for all the interior apart from the top 2 at the rear above the wheels arches. Did u just use a ply board panel to cover the whole rear quarters?

@kiravans5874

2 жыл бұрын

@@Galamesh123 Yes thats correct a 4mm ply wood panel we use here.

What Glue u are using and do you sell it?

@kiravans5874

3 жыл бұрын

Hi, it's a high temp spray adhesive. We sell it here www.kiravans.co.uk/collections/insulation-carpet-vinyl

Hi what sort of price figure would I be looking at for someone do do this for me on a t5 2004 please ruffle thanks

@kiravans5874

Жыл бұрын

Hi. Prices vary from fitter to fitter so best to contact a few local ones and see how they compare.

Without this being sped up how long did this take you??

@kiravans5874

2 жыл бұрын

Thanks for your question. I usually say a professional could carpet line a van in a day but a novice should allow two days minimum probably. It’s hard to quantify because some people are more practical than others etc....my best advice is don't rush it!

What are your thoughts on a vapour barrier

@kiravans5874

2 жыл бұрын

Hi Brian, we don't use a vapour barrier on our vans personally but its each to their on decision on this topic. From research we have learnt that its can be very difficult to create a vapour barrier that would cover the entire van area 100% which is what would be needed. Usually there is still potential for vapour to get in though around light fittings, switches and if it seeps in through here and has no way of getting out as the rest of the van is protected by the barrier it is likely to just accumulate which could result in further harm down the line. With materials such as paneling and lining alone any vapour that does come in should also be able to go back out again. We found this video very interesting on the topic: kzread.info/dash/bejne/e56O25iycdHNn7Q.html Like we said however we dont personally use them but others might and may have tips to ensure a 100% protection.

@brianbrooks4070

2 жыл бұрын

@@kiravans5874 thanks for the video, I think I would agree with his thoughts not possible to get 100%…… hence could make it worse.

@brianbrooks4070

2 жыл бұрын

By the way great videos

@kiravans5874

2 жыл бұрын

@@brianbrooks4070 Thank you Brian.

What screws do you use to secure the panels ? Thanks !

@kiravans5874

3 жыл бұрын

It doesn't really matter. Any screw that is similar colour to your carpet and long enough to get through the plywood and the metal behind. Drill your screw holes just a bit smaller in diameter than the screw so it goes in easy and doesn't snap off.

@twangogt

3 жыл бұрын

Kiravans does the drilling and the screws not ravel up the carpet on the way in?

@kiravans5874

3 жыл бұрын

@@twangogt not if you've got enough glue on and the drill bit is nice and sharp.

@twangogt

3 жыл бұрын

@@kiravans5874 ok. Thanks for getting back. Paneling this weekend.

@EE.BIKE.GUM77

3 жыл бұрын

@@kiravans5874 do/can you use self tapping/tec type screw or is it just your average type with a flat head..?

Where to buy? I need door storage

@kiravans5874

3 жыл бұрын

www.kiravans.co.uk/pages/search-results-page?q=door+store

👍👍👍❤️❗️❗️❗️

Good work, but that adhesive is HIGHLY VOC so you should be wearing an appropriate breather.

Where is double Bubble foil

@kiravans5874

3 жыл бұрын

Hello. Please see website for all product information. www.kiravans.co.uk/. Under Lining.

use a mask when spraying

This part is not a DIY job. 🤦‍♂️

Change this bloody intro sound ffs

Excellent video