💎💎Jewelry Business Academy Course jewelry-business-academy.teachable.com 💎💎

@caseyweeks4581

5 ай бұрын

I have casters who can do the printing and molding themselves. How can i get my hands on these apps and files to send them ?

I placed an order for some tools to make jewelry to prototype a first design. And, after watching your videos, I just contacted the one jewelry manufacturer near me. And, it’s cool to know that I could get casting services outside of town if needed.

My man dropping that knowledge. Thanks bro.

Excellent video with clear, concise instructions. Thank you.

@SlavaTVOfficial

Жыл бұрын

Thank you for watching!

I haven’t been disappointed yet keep the quality videos coming. Thanks!

@SlavaTVOfficial

Жыл бұрын

Thank you for watching!

Been here from the start and glad to see you pop content out more and more! True Gem💯

@SlavaTVOfficial

Жыл бұрын

Thank you so much Brandon, truly appreciate you!

I am in shock!! What a wonderful business idea!! Love this video!!! Thankyou for this very helpful knowledge!🙏🏾🧡🙏🏾🧡

@SlavaTVOfficial

Жыл бұрын

Thanks so much Keisha! Glad it was helpful!

Thank you, so much value , straight to the point

0 bs, awesome pace, love it 👌🏻

Definitely waiting on the casting video to drop my boy! 🔥👀

you put us on game, you rock bro.

10/10 vid. Keep it up!

This was amazing, thankyou!

Another banger 🔥

Thanks for sharing all that knowledge with us. Subscribed.

@SlavaTVOfficial

3 ай бұрын

Thanks for the sub!

Appreciate your videos just got my mars 3

@SlavaTVOfficial

Жыл бұрын

congrats!

great video ! thank you !

wow, lots of steps but doable ty

Thank you so much for sharing!

What a great video with such value info!! I just would like to know wich program I could use to create the 3d models for this printer

It might be cheaper this way if you do a lot of casting. But you can also just send files directly to casters and they'll print and cast them for you. Then you dont gotta buy a printer and resin or anything.

@Onsiteshenanigans

Жыл бұрын

Any suggestions for online caster?

@BabyJesus66

Жыл бұрын

@@Onsiteshenanigans shapeways does it. Not sure if theyre the cheapest or best, but that's just one I know of.

@kingsroulette1487

Жыл бұрын

Most good casting companies will charge $50+ per print, especially if they’re using commercial printers that cost more to run.

@geertje0105

Жыл бұрын

@@kingsroulette1487 i pay most of the time 50/90$ just for 3D print

@kingsroulette1487

Жыл бұрын

@@geertje0105 depending on what’s used, it can be very expensive. Most good casting companies will use commercial printers that run specific resin with a super high wax content, that’s really expensive. The cost comes from the utilization of $250K machines instead of $200 resin printers, but both will work.

Slava, this is super helpful! Quick question, Where do you get the files(images to print)? If I want to use this printer to make some designs / 3d images on grills.. how would I attach it to the waxed grill?

Thanks Man frfr💪🏾

I'd love to see you go a bit more in depth into this🔥🔥🤔😎

Thank you for this! question, can this burn wax resin be used with a bigger sla printer for big objects?

Can you tell roughly how long does a 1L of resin last you. For example 30 rings or smth like this.

@vision3690

3 ай бұрын

Would also like to know 👍

Great video!! One little question: How do you link up the links to make chain? :-)

Awesome. Thank you.

@SlavaTVOfficial

Жыл бұрын

Thanks for watching!

Hi , thank you for the information , now I’m not scare to use 3D printer ! Do I need to buy also a washing/curing station like Elegoo Mercury plus , or it’s not really necessary ? Thank you in advance

Thank you

Do a video on making a memorial pendant

Should I get the Mars 4 Max? It’s $120 more, but is it worth it? Will the prints be better? Or should I just go with the Mars Pro 3? I seen in another video you said for more detailed prints I would I have to take it to a jeweler. Eventually I want to get into being able to print, cast, benching, set diamonds, and polish again all by myself. Please send advice. I watch all of your videos and have been becoming obsessed with the idea of chasing my dream.

whens the course coming? ready to start...

Question regarding the chains, are they able to cast the resin so that the outcome of the jewelry of gold or silver acts like a real chain or are they "pasted" together?

هل يمكنني بأن اصنع كل يوم تقريبًا 300 الى 500جرام من المجوهرات انا عندي متجر بيع بالتجزئة طبعًا بهذه الطابعة أرجو بأن ترد على ولك جزيل الشكر متابعك من الإمارات العربية المتحدة لماذا ما ترد منذ 3 أسبوع

Quality information

@SlavaTVOfficial

Жыл бұрын

Thank you!

@Sjgajmerjewelryart007

8 ай бұрын

youtube.com/@Sjgajmerjewelrymakers007?si=Qy9oAzNE_wXCETBB

Will the halot mage 8k resin printer do even better bigger pieces?

Thanks for all the helpful content you’ve created. Although I have one question, with this castable resin is UV curing not required or what?

@nickolasbarnes4430

10 ай бұрын

He mentioned it quickly. You do have to cure in the sun or under a lamp.

@ceezy5

4 ай бұрын

The Power Rising Fournier doesn’t require it afterwards but it is about 300 a bottle or half of that for a small bottle.

I have a question , great video first of all, how does the caster deals with the resins is it the same than sending them wax models? Do they make trees with the pieces that you send or do they cast each one separately and do they they mold like lost wax ?

@Asolapao

4 ай бұрын

i have the same question

I usually say the game is sold not told but this guy literally shitted on the jewelry industry lol thanks for the video pimp ✌️

can you share your printing setting for trueblue resin?

I want to know is it important to put the resin back into the bottle after printing is done?...Is there a problem if I put it as it is in the printer and don't put it back

hey sir have you tried the saturn 3 12k ultra thinking to buy that 3d printer do you recommend it ?

Thank You Slava, Amazing video. I Have a Kaya XL casting unit and I want to produce multi rings for retail and wholesale. Is the Mars Elegoo 3 a good 3d printer for this purpose or would you recommend a more advance printer. Its a small start up thus my production per design will be around 12 rings (same design) at a time. Thank you for your help and assistance

@SlavaTVOfficial

Жыл бұрын

Hi Mohit, Thank you! Yes the Mars will absolutely do the job!

I have been trying to get a ring made from a picture. Can it be done with this process? Thanks

So do you take the individual links to the caster?

Hey bro love the vids, could you do a making of a rope chain ?

How much does it cost per Cuban ring to print? Using the more expensive Castable wax. I want to know how much I should charge a jeweler if they want me to print for them.

Can we do Direct casting on this material?

Is there a way to make gold teeth with the software?

So can I print with this type of resin in normal 3D resin printer? 😅 I thought there are special ones for jewelery making

Is Phrozen Sonic Mighty 8k good for jewelry printing?

Brother can you make a casting video I’m already buying and selling a lot of jewelry doing good but I want to manufacture my own. Not sure if it’s worth it but I don’t have a caster. I sell straight hand made Cuban links

Os this possible to use this resin on a halot mage pro ?

What’s the bottom retract speed and retract speed settings?

Im on my 4th trial with Siraya Tech True Blue apparently a really fiddly resin fml... increased the exposure time so hopefully this works! From what I have read online maybe my room is too cold? Did you have many issues with the more expensive brand? I might just purchase that with the primer. Thanks!

@zepol1459

9 ай бұрын

How’s it working now?

Hey just bought it after seeing your video , many thanks ; Just one question for the resins do you suggest the dark one for the diamond industry ??

@SlavaTVOfficial

7 ай бұрын

Hey, yes it works great!

SLAVA TV always on point!!!!

@SlavaTVOfficial

Жыл бұрын

Thank you!!

isn't it toxic to drain in the sink?

What material is the black ring made of?

What is theelting point of that resin? Could you just use the lost wax method on non cast able resin?

Hey they don’t sell the primer anymore any recommendations

Do you also have a amazon product for Primer Resin Strong Adhesion. Need to pay 30$ for shipping and it only costs 10$ ..

whats a website that I can go to that will have jewelry files I can download and print

what resin should i use for this printer

Where can i get the prints ... Files for the rings and chains

Great vid!!can you drop a video on how to caste your own jewlery if you can apreciate it

@SlavaTVOfficial

Жыл бұрын

yes im going to do a very in depth video on it

@elitegamer1706

Жыл бұрын

Most definitely apreciate it that if I make my own jewlery can I first start going to jewlers and selling pieces instead of online?

@SlavaTVOfficial

Жыл бұрын

Definitely don't do that. they can make it themselves, you haver to get sales from customers

Thanks for the tutorial video. This is gonna help me a lot. I should be getting my mars3 pro in a few days..I do have 1 question.. I order Ifun jewerly resin.. I'm regretting it because the web site doesn't tell you the settings.. I'm wondering if you could help me find them...thank you

@SlavaTVOfficial

Жыл бұрын

It should be ion the amazon questions section check there

@christopherrapp5954

Жыл бұрын

Ok. Tahnk you I found the link, plus some others. Just did the rook test got it right after the fourth attempt.. for real thank you for your videos.. I do have some other questions.. I'm gonna print some hollow maimi cuban chain and bracelet, my question is . Will the links have to be slice or will they just be solder together.. also I'm trying to do the math on how many links.. 10mm × 22in.. 22in equals 588mm divided by 10 .. equal 58.8 links.. please help .

@blk986

10 ай бұрын

@@christopherrapp5954so just cut 10% off the the two edge links. This is where you will attach the clasp.

where do you buy the gold and silver

This is able to cast 22k gold? What type of resin is suitable?

How do you price your jewelry?

What about the size of the ring … how did you get it

Can you tell me where to find a caster that don't charge too much over spot? Thank you!

@RRSF09

4 ай бұрын

This is a bit misleading - casting houses have overhead that requires more than a couple of bucks over spot for casting. First off, no one is buying metal at spot - if you buy pre-alloyed metal you are going to pay around 10% over, then you have shipping and insurance costs + rent + labor + utilities + taxes + profits and there is no one who is casting at a couple of dollars over spot that is doing a good job and following best practices around disposal of waste, OSHA compliance etc. Another thing is that if you get a caster that just batches your castings with a bunch of other pieces to cast at a low price then they are going to cast your flask at a temperature and metal temperature that will guarantee that the thinnest pieces fill, and if your parts are heavier you are going to see issues with casting quality (porosity primarily) that will affect your final product. As I've been in jewelry manufacturing for over 45 years I can assure you that you get what you pay for. Cheapest doesn't always end up being the most profitable.

nice

is it possible to make Grillz using this as well?

What’s the name of that black Cuban ring color?

i have a question, can you use this wax for lose wax casting method

@saj2412

Ай бұрын

yep

thanks for the videos. do you also have where to sell your jewelry you made?

@SlavaTVOfficial

Жыл бұрын

I will do more videos about this!

Do you have an idea of print settings for Siraya Tech purple castable resin? For best results??

@ikeb9474

8 ай бұрын

Did you find good settings? I’ve been searching around as well

How’s it going brother I’m looking to grow my business and do things right. I buy wholesale but want the best price for jewelry. Can we get in touch i want your advice on who to go to for casting In LA I’ll be ordering this printer now and going to do my first project

What type of computer 💻 will work for this?

Hi, your jewelry course not able to pay. Is possible to pay from sweden?

What is the extra step with the siraya??

How do you put the Cuban links together

Is very nice,?what what is the price?

Or the elagoo mars 4 9k?

Is this only possible with a Resin Printer? I had an Ender 3 wondering if it’s possible to do on a regular 3D printer as well.

@abdlnourkhayata8019

11 ай бұрын

for jewelery you need a resin printer

What’s the difference from the pro?

Slava I was looking for a machine that makes pendants and came across your channel. I was looking into gold filled pendants for my daughters bracelet business she is starting. Do you think this is the route I should take? Is this a way I can make gold filled pendants?TYA

@SlavaTVOfficial

11 ай бұрын

Hi, it depends. How is she making these pieces now? What is her budget and how many is she making? Please watch my latest video I talk about this

I need help! I tried printing rings with the blue resin by siraya tech but all it prints is flat rings that remind me of Minecraft (shape wise). What am I doing wrong? Does anyone know the exact printer settings for this resin because I wasn‘t able to find those either. At least every source was different or unclear. I am a little desperate and please excuse my English, I hope it‘s understandable.

@trevorjones9381

8 ай бұрын

Man I feel you, I just got a halot 3D printer and can’t get anything to build higher than a couple layers

We need a. Video of how to cast

Do you think this would work with any resin 3-D printer or could I get one used.

@SlavaTVOfficial

Жыл бұрын

I don't suggest getting a used one

if we print jewelry on a tree for casting, will it cost more due to the tree extra material ?

@abdlnourkhayata8019

11 ай бұрын

not entirely , if you mold the pieces the wax will cost around 20 dollars per kilogram , the resin costs 50 to a 100 per kg ,both will kind of give you the same ammount of wax models , which are enough to make about 10 kilograms worth of 18k gold , basically theyre both cheap , however theres cons to both , molding can be faster but it requires more work , when printing you just click the button and wait , but after it has done printing , you will have to remove the support which will be a pain to do ,as a jeweler i suggest molding if youre doing small quantities , if you plan on making 5 trees plus daily , get yourself a big 3d printer and print them all at once

How do you make it with metal?

This was a really lovely and concise video. The only thing I’d like to mention is gloves and ventilation. The resin is really toxic and can cause cancers when it absorbs into your skin. It’s not very good to breathe either. I don’t want to see an eloquent speaking jewelry smith have their life cut short by icky chemical consequences. Keep it up man!

@louisaaissaoui587

4 ай бұрын

Please reply to my answer .. do this printer print gold? ...how can i make gold products like my resin mold

@saj2412

Ай бұрын

@@louisaaissaoui587 u need to cast the resin print

Hey man, every single place I call tried to charge $20 over the spot price per gram. Not $1.50. What should I do?

@kingsroulette1487

Жыл бұрын

Either deal with them in person or learn to cast and do the work. Regardless, using a caster won’t keep you in business long unless you quickly convert to having your own employees cast and finish for you.

4:45 where did you get this UV light, it comes with the printer ? or you buy it

@saj2412

Ай бұрын

pretty sure amazon has it

Living in the bay area, looking for gold casters and polishers and have yet to find anyone. That is the sole purpose that kept me away from getting into jewelry. Can someone point me in the right direction? only ppl offering it are just offering it if you're a customer and plan to buy the full piece

@SlavaTVOfficial

Жыл бұрын

just send it to Avos or another spot. you can get any repair shop to polish for you

Would you say that with a budge of 1k I can make my first piece to sell? Thank you for the videos you’re the goat

@kingsroulette1487

Жыл бұрын

With $1k you can make something really big out of silver, or something respectable out of 10-18k gold. It’s all about weight and how much you can actually do yourself in the jewelry making process. If you can run prints, do your own casting, finishing, stone setting, and marketing, everything is cheaper. But it takes years to become a genuinely skilled jeweler instead of a glorified middle man.

@GGTaino

Жыл бұрын

@@kingsroulette1487 I would only be able to buy the printer and that’s it, outsource everything else

Mars 4 DLP or Mars 3 Pro 4K?