Amazing content always a fan of yours IG and KZread keep it up

@NekoPrints

Жыл бұрын

Appreciate it! That means a ton thank you!

Hello, can we press the DTF design onto paper such as Kraft Paper or any thicker paper?

@NekoPrints

Жыл бұрын

I actually haven't tried that! I'll make sure to test that out and report the results!

Is Ricoh Ri 1000 direct print on garment? Question is why you are using DTF instead of DPG? Any reason?

@NekoPrints

15 күн бұрын

Yeah it's dtg. I used to use it for DTF for polyester shirts and to sell dtf transfers.

How well do these hold up in the washer. Also do you have to use their designs, or can you use your own?

@NekoPrints

Жыл бұрын

So far I have a few I've done that have been washed over 10 times and still look great :) I have my own designs I offer but I also do custom transfers.

@barbra429

Жыл бұрын

@@NekoPrints ok

I’m having sm issues trying to heat press hot peel, I do 325 20 secs and its always peeling off when I take off the film

@NekoPrints

Жыл бұрын

Try letting it cool a bit or add more pressure?

@thage0

Жыл бұрын

@@NekoPrints yeah I have it as heavy pressure, the design just comes off the shirt from the film when I do hot peel which is what the instructions says to do. Is it bc the temp is 2 High ?

@NekoPrints

Жыл бұрын

@@thage0 I usually use 320f. Have you tried letting it cool to see if that helps?

I have bubbles in my DTF transfer after I pressed it. What did I do wrong? I'm scared that if I try to peel it, some parts will not have adhered properly.

@NekoPrints

Жыл бұрын

Did you check the adhesive? Maybe it didnt cure right? Did you prepress ytour shirt? I'd try to press it down again with some more pressure and maybe on a different part of the press.

@rebecarivas438

Жыл бұрын

@@NekoPrints Thanks for the response!! I repressed and peeled. The design looks ok but has some light spots. I have a Siser heat press. I read a tutorial that I may have needed to wipe or expose adhesive side to some heat before pressing?

How to make it softer ??

@NekoPrints

10 ай бұрын

The only way really is to give it a second press.

What is the correct pressure when pressing

@NekoPrints

Жыл бұрын

I always use heavy pressure

@gameislife6688

Жыл бұрын

@@NekoPrints full pressure? How about the temperature? Because i have a problem when the durability . It craks after wash

hi, what size is your image?

@NekoPrints

10 ай бұрын

This was a 13 x 19 I believe

Pressed up to high. Four fingers

@NekoPrints

Жыл бұрын

I break the 4 finger rule with oversized designs like this one. If I used 4 fingers the bottom of the design would sit way too low

Ok you go by paper size 😜

@NekoPrints

Жыл бұрын

Now I have them by the rolls! 😁

@juicyjuicy2471

Жыл бұрын

Ok I'm looking at video trying learn thinks for the information I love the t shirt site you recommend I wish they had them in sizes like 2 & 3