Have been buying PSA cards for ages but am now just prepping my first time ever sending them myself. Greatly appreciate this video. Very helpful.

@BREAKfastcards

Жыл бұрын

You're welcome and good luck!

This was a great video, thanks!

Great vid bud !! I appreciate you

Thanks so much! Very simple and easy steps in the video! Thanks!

@BREAKfastcards

Жыл бұрын

Anytime!

Thanks for sharing! Great video

Thank you for this video!

Thank you for this B. 🙏

This is perfect thank you

Nice tip. awesome video.. thank you for sharing..

Thanks for this, I'm about to send one soon

You the man! ❤

Great advice! Thanks for the video!

Thanks for creating this how to video, getting ready to submit some cards for the first time and was not sure how to properly wrap them.

@BREAKfastcards

Жыл бұрын

Good luck!

FYI: PSA has come out recently saying not to put the pull tab on submissions. Doesn’t really matter but they’ve stated no pull tab as their preference

@BREAKfastcards

Жыл бұрын

Interesting. Got the link or article for that?

@pinkysjams6372

Жыл бұрын

@@BREAKfastcards Just says it in their "how to submit video". They don't say why, just says they prefer not to have them for some reason.

@PokeGenCo

Жыл бұрын

i included psa video as well for 2023

@Bulshitero

10 ай бұрын

@@BREAKfastcards psa cut the sides of card savers to release the cards so pull tabs are unnecessary.

@nymze742

4 ай бұрын

@@BREAKfastcardsit’s a KZread video smh

Nice tutorial!

Thanks!!! 👌

Great content! informative!!! Thank you for sharing!

nice video sir stay safe always..

Thanks I’m doing my first submission next week and not sure the process. I got a deal from my friend for 2022 Mosaic Kenny Pickett Red Sparkle for 40$ plus 2 cards

You should make one of these videos for booster packs. We would greatly appreciate it.

if you’re doing a bulk submission, what’s the most amount of cards you should put in between the cardboard at a time? and is PSA still requesting no pull tabs?

Wish i can find a video of someone sending old slab for a correct one to psa.the correct process of that would be cool

Wow! Nice video... very helpful one... btw Penny sleeves in here are still like 1buck

@Fe04ry

Жыл бұрын

btw i didnot know that they are pulling it out I thought they were going to cut it, thats why you have to send in semigrid...

@BREAKfastcards

Жыл бұрын

There’s a lot of different methods and reasons for it, getting a PSA rep to say why or if there’s an official article that I haven’t seen that would be nice

Thanks mate. This is so far best video about this topic I have seen. What do you think about microfibre cloth to clean up the surface? And do you have any minimum value of the cards that you do send for grading? Have a good day.

@BREAKfastcards

Жыл бұрын

I’ve used microfiber a few times and know others that use it. It’s slightly more difficult to clean with but slightly easier in the surface and edges. Minimum value I’d say is the cost of shipping and submission +% profit you’re trying to make. If it’s just for your PC, there is no minimum at all required

Great video. When you open packs live how come you use a toploader to put in the special card in instead of the card saver 1?

@BREAKfastcards

Жыл бұрын

I personally use top loaders to store most of my cards. It provides more protection but at the same time it requires a bit more effort to take cards out. PSA requests card savers for easier handling

@RCAdome28

5 ай бұрын

Card Saver 1 is only for GRADING. He like most collectors use top loaders for STORING and COLLECTING.

@tomw.4255

4 ай бұрын

You don't want the card to ever sit very tight to any holder or plastic for long storage times. Especially with chrome or foil cards. Too tight/card sticks overtime/causes damage. Even some top loaders are too tight.

Thank you for this! What size box do you send them in?

@BREAKfastcards

5 ай бұрын

Really depends on how safe you want to pack them. Can be 7x5, 9x7, 11x9, just make sure to have enough thickness (at least 3-4 inches) with proper padding/bubble wrap around the cardboard sandwich

@kathglass2

4 ай бұрын

Thank you! I'm now a subscriber! @@BREAKfastcards

I’m sending mine unopened and in the sealed packaging from factory hoping to get a 10 when they open it

What about factory sealed cards? Take them out of the case or just send the whole sealed case in with sticker label untouched?

@thinkaboutangel

Жыл бұрын

they remove the factory seal thing

What about bulk submissions?

What if it’s a thicker card. Like a spectra auto for instance, still put it in a card saver 1? And will it damage the thicker card being pressed on by the card saver

@BREAKfastcards

Жыл бұрын

Typically I keep those thicker ones in a thicker sleeve and thicker top loader with a pull tab. Gently taping the top of the loader so it doesn't slide out during shipping

Do you write the PSA address on the box like a normal package or do you use the printed address on piece of paper?

@BREAKfastcards

5 ай бұрын

Either method works from my experience, but printed allows for least confusion

@RCAdome28

5 ай бұрын

@@BREAKfastcards great! Thanks!

How about for bulk submissions? How would you pack 10 cards? Surely not cardboard sandwich for each one right?

@BREAKfastcards

4 ай бұрын

That's correct. You place them all in 1 cardboard sandwich

Do you put cardboard around each card or a group

@BREAKfastcards

2 ай бұрын

Around a group

What can I do to print the forums if I don't have a printer ? I have a label printer I can print picture images on so could I put the forums on 4x6 labels and throw them in the box ?

@BREAKfastcards

Жыл бұрын

I’ve never tried that since 4x6 might be too small to yes since PSA needs to read and write on them

@rawcardzcollectibles

Жыл бұрын

@@BREAKfastcards yeah that's what I was worried about too.. dang

If i'm submitting 1 card, can I send in a padded envelope with the forms or does it have to be sent in a box?

@BREAKfastcards

5 ай бұрын

It’s not a problem to do that, a box generally just provides better protection

Does anyone know how to get a shipping label for psa

Yo, for 2022 Mosaic football autographs do I need to just get the card graded or the card and the autograph the dual service? It's a sticker auto

@BREAKfastcards

Жыл бұрын

Great question. You don't ever need a dual service for card and auto grade, but there is definitely some added value if both get 10s, and sometimes reduced value if it's a combination of 9 and 10. The simplest option is just to get the card graded. If the card is in good condition but the auto is off (or vice versa), you can grade one and have the other "authenticated" without a grade

@search_collectibles

Жыл бұрын

@@BREAKfastcards awesome thanks for the reply!

What about the one touch holders? I don’t like to handle them more than I have to and one still has the panini seal. Do I have to switch them all over before submitting?

@BREAKfastcards

11 ай бұрын

Honestly never tried submitting in a mag. I always take the cards out to inspect the condition because even cards in mags can be damaged from the manufacturer

@rollemproper3087

11 ай бұрын

@@BREAKfastcards i would but the one from with the panini seal is a one of one and looks emmaculate from what I can see, and the others in mags I put there and know the condition and the risk of dinging a corner or edge in the process of switching them doesn’t seem worth it unless necessary

@BREAKfastcards

11 ай бұрын

@@rollemproper3087 You could try submitting as is then. If it's just one, PSA might just accept it. If you want to be 100% sure you can reach out to their customer service rep

For the barcode that goes on the outside of the box… what’s the best way to apply it to the box?

@BREAKfastcards

Жыл бұрын

You can typically just tape it on with clear tape with some overlap to the box itself

@abelcastrojr4557

Жыл бұрын

@@BREAKfastcards thanks! Wasn’t sure how to go about it… Appreciate it!

Thank you! SIUUUUUUUU!

Where do u get card board selves from

@BREAKfastcards

9 ай бұрын

Can buy some from Amazon, eBay. I typically just cut up boxes I already have

Might be dumb question but is there a link for cardboard?

@BREAKfastcards

Жыл бұрын

Besides cutting your extra boxes or ordering plain ones from Amazon then cutting them, I've come across a brand called Hobby Armor

If you are submitting 7 cards do you put all 7 in 1 cardboard sandwich or 7 different ones

@BREAKfastcards

10 ай бұрын

All 7 in 1 sandwich

@grahamengland6083

10 ай бұрын

@@BREAKfastcards awesome thx for understanding the question it was poorly worded

Do they accept top loader instead of card saver ?

@thomascapel3954

Жыл бұрын

All good found the link on psa for the submissions

@michaelburnett9266

Жыл бұрын

Yes they do. That is how I summit my cards to them.

@thomascapel3954

Жыл бұрын

@@michaelburnett9266 i saw they prefer card savers, but did u had problems (returns times) with top loaders?

This might be off topic but what is the DIFFERENCE between PSA and BGS? I’ve been seeing so many of the #117 Jordan rookie cards selling on Ebay for more than $20k starting with BGS but barely saw anyone’s less than that price with a BGS grade. Does BGS require the person to sell their card at a massive price or something like that in order for it to be graded? I know that question might sound ridiculous but I really need to know what is the difference between the two? I’m trying to finally start getting some of my cards graded! Also how can someone find out if their card is a “1/1”?

@BREAKfastcards

9 ай бұрын

PSA is definitely the more popular and mainstream grading company that most people look for. BGS is up there right under PSA but not as popular. BGS does have a higher grade level "10 pristine" and "10 Black label" that are the whole point of submission for a lot of collectors, but they are extremely rare. So when cards do get BGS 10, they are worth more than the PSA 10 equivalent. 1/1s usually have 1/1, "One of One", or "1 of 1" printed on the card itself (front/back)

@garrettblaylock7206

9 ай бұрын

@@BREAKfastcards ok so BGS will grade the card more “precisely” than PSA will? If that is the case then why do I see many rookie Reggie Miller cards that have been sold at a much higher price with the PSA than the BGS?

@BREAKfastcards

9 ай бұрын

@@garrettblaylock7206 I wouldn't say more precisely, but it's because BGS shows a point system with the grade rather than just the final grade like PSA does

@garrettblaylock7206

9 ай бұрын

Ok got it. But in terms of cards just getting sold overall I am very confused about whether it’s really worth the time for me to try to get Sports autographs signed on cards. Like within the past F’N 10 hours on Ebay I have been seeing many cards get sold more being just graded instead of autographed and graded together. Do you know if that actually happens much of the time or could it be an actual glitch on their website? For example I saw two non-signed PSA Luka Doncic cards sold at a higher price than a signed and 9 graded one! Another example is a that 3 Hakeem Olajuwon unsigned rookie cards got sold higher than a signed one. The highest priced unsigned one got sold $5,500 more! Like WTF I’m very confused!!! Signed cards are supposed to have much more value than just graded cards. I’m basically asking is it worth the time in trying to get the cards signed before being graded???

@garrettblaylock7206

9 ай бұрын

@@BREAKfastcards *In terms of the Luka Doncic statement I meant to type I saw two unsigned cards instead of two ungraded. Excuse the typo. I already edited the comment by the way.

What about a ticket stub I have like 2 right now but I'd like to get them graded

@BREAKfastcards

Жыл бұрын

That's gonna be a bit more challenging, but I'd recommend using specialty sleeves/protectors that can be found at local card shops (for bigger cards/magazines). PSA will still accept those, especially if it's just a few

@pancake_master0257

Жыл бұрын

​@@BREAKfastcards okay but like do I have to ship it in a small box or will a polymailer work or a bubble wrap envelope?

@BREAKfastcards

Жыл бұрын

@@pancake_master0257 I don't recommend sending anything that's not a box or stronger. Bubble/poly mailers can get crushed very easily and you don't want to risk that

Pull tab not needed. PSA cuts open card saver

BBQ Chicken with Cheetos fingers submission at 7K subs?

@BREAKfastcards

Жыл бұрын

👀

Does anyone know how to make a shipping label?

@BREAKfastcards

Жыл бұрын

Those are typically created by a third party and can be printed/taped using a normal printer, or by using a thermal label printer

Update. PSA no longer recommends using the pull tab. IDK why

Do I write the address ? On the box ?

@BREAKfastcards

Жыл бұрын

Return and destination address on the outside of the final package, yes

Top loader with a pull tab is better and safer. No one should use those team card bs protectors

Yes PSA said no tabs, here the link: kzread.info/dash/bejne/hJqpyKyMfbWuYMo.html

Is it free to submit/grade in PSA?

@toofragile825

Жыл бұрын

of course not silly lmfao

A better mood who cares about there mood if I’m paying money for service be professional

You forgot the $100 bill😂

@BREAKfastcards

Жыл бұрын

It does help sometimes!

So if u get cards graded u pay hundreds which is to expensive u out on eBay and don’t sell your stuck w card